International Diffusion of Open Path FTIR Technology and Air Monitoring Methods: Taiwan (Republic of China)

Abstract

International cooperation and diffusion of environmental technologies is a central goal of the U.S. EPA Environmental Technology Initiative, and is of great interest to many countries. One objective is to exchange knowledge and skills concerning new monitoring technologies. In this case, the technology was open path Fourier Transform Infrared Spectrometry (op-FTIR).

Taiwan is a high-technology, newly industrialized country. Because of air pollution problems, it is interested in obtaining skills, knowledge, and instrumentation for monitoring air pollutants. In April 1994, the Industrial Technology Research Institute, Center for Industrial Safety and Health Technology (ITRI/CISH) in Hsinchu, Taiwan, requested intensive training in op-FTIR. Training was held between September 30,1994 and October 29,1994.

During the stay, the instructor provided intensive training on op-FTIR theory as well as an introduction to available instrumentation and software. The training concluded with a field demonstration of the instrumentation in a manufacturing facility. This report gives an overview of the training methods, structure, and materials in the op-FTIR training course. It will also address various problems encountered while teaching this course. In addition, the potential use for this technology in industry as well as by the Taiwanese government will be explained.     

Abatement of Ammonia and Hydrogen Sulfide Emissions from a Swine Lagoon Using a Polymer Biocover

ABSTRACT

The purpose of this research was to determine the efficiency of a polymer biocover for the abatement of H₂S and NH₃ emissions from an east-central Missouri swine lagoon with a total surface area of 7800 m². The flux rate of NH₃, H₂S, and CH₄ was monitored continuously from two adjacent, circular (d = 66 m) control and treatment plots using a nonintrusive, micrometeorological method during three independent sampling periods that ranged between 52 and 149 hr. Abatement rates were observed to undergo a temporal acclimation event in which NH₃ abatement efficiency improved from 17 to 54% (p = <0.0001 to 0.0005) and H₂S abatement efficiency improved from 23 to 58% (p < 0.0001) over a 3-month period. The increase in abatement efficiency for NH₃ and H₂S over the sampling period was correlated with the development of a stable anaerobic floc layer on the bottom surface of the biocover that reduced mass transfer of NH₃ and H₂S across the surface. Analysis of methanogenesis activity showed that the biocover enhanced the rate of anaerobic digestion by 25% when compared with the control. The biocover-enhanced anaerobic digestion process was shown to represent an effective mechanism to counteract the accumulation of methanogenic substrates in the biocovered lagoon.     

Ozone Air Quality over North America: Part II—An Analysis of Trend Detection and Attribution Techniques

ABSTRACT

Assessment of regulatory programs aimed at improving ambient O₃ air quality is of considerable interest to the scientific community and to policymakers. Trend detection, the identification of statistically significant long-term changes, and attribution, linking change to specific clima-tological and anthropogenic forcings, are instrumental to this assessment. Detection and attribution are difficult because changes in pollutant concentrations of interest to policymakers may be much smaller than natural variations due to weather and climate. In addition, there are considerable differences in reported trends seemingly based on similar statistical methods and databases. Differences arise from the variety of techniques used to reduce nontrend variation in time series, including mitigating the effects of meteorology and the variety of metrics used to track changes. In this paper, we review the trend assessment techniques being used in the air pollution field and discuss their strengths and limitations in discerning and attributing changes in O₃ to emission control policies.     

Real-World Vehicle Emissions: A Summary of the Tenth Coordinating Research Council On-Road Vehicle Emissions Workshop

ABSTRACT

The Coordinating Research Council (CRC) held its tenth workshop in March 2000, focusing on results from the most recent real-world vehicle emissions research. In this paper, we summarize the presentations from researchers who are engaged in improving our understanding of the contribution of mobile sources to emission inventories. Participants in the workshop discussed efforts to improve mobile source emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles, new methods for measuring mobile source emissions, improvements in vehicle emission control systems (ECSs), and evaluation of motor vehicle inspection/maintenance (I/M) programs, as well as topics for future research.     

Ozone Air Quality over North America: Part I—A Review of Reported Trends

ABSTRACT

Ozone and precursor trends can be used to measure the effectiveness of regulatory programs that have been implemented. In this paper, we review trends in the concentrations of O₃, NO_x, and HCs over North America that have been reported in the literature. Although most existing trend studies are confounded by meteorological variability, both the raw data trends and the trends adjusted for meteorology collectively indicate a general decreasing trend in O concentrations in most areas of the United States during 1985-1996. In Canada, mean daily maximum 1-hr O₃ concentrations at urban sites show mixed trends with a majority of sites showing an increase from 1980 to 1993. Mean daily maximum 1-hr O₃ at most regionally representative Canadian sites appears to decrease from 1985 to 1993 or shows no significant change. There are far fewer data and analyses of NO_x and HC trends. Available studies covering various ranges of years indicate decreases in ambient NO_x and HC concentrations in Los Angeles, CA, decreases in HC concentrations in northeastern U.S. cities, and decreases in NO concentrations in Canadian cities. Two key needs are long-term HC and NO_x measurements, particularly at rural sites, and a systematic comparison of trend detection techniques on a reference data set.     

Wintertime Vertical Variations in Particulate Matter (PM) and Precursor Concentrations in the San Joaquin Valley during the California Regional Coarse PM/Fine PM Air Quality Study

Abstract

Air quality monitoring was conducted at a rural site with a tower in the middle of California’s San Joaquin Valley (SJV) and at elevated sites in the foothills and mountains surrounding the SJV for the California Regional PM₁₀/M_2.5 Air Quality Study. Measurements at the surface and on a tower at 90 m were collected in Angiola, CA, from ecember 2000 through February 2001 and included hourly black carbon (BC), particle counts from optical particle counters, nitric oxide, ozone, temperature, relative humidity, wind speed, and direction. Boundary site measurements were made primarily using 24-hr integrated particulate matter (PM) samples. These measurements were used to understand the vertical variations of PM and PM precursors, the effect of stratification in the winter on concentrations and chemistry aloft and at the surface, and the impact of aloft-versus-surface transport on PM concentrations. Vertical variations of concentrations differed among individual species. The stratification may be important to atmospheric chemistry processes, particularly nighttime nitrate formation aloft, because NO₂ appeared to be oxidized by ozone in the stratified aloft layer. Additionally, increases in accumulation-mode particle concentrations in the aloft layer during a fine PM (PM_2.5) episode corresponded with increases in aloft nitrate, demonstrating the likelihood of an aloft nighttime nitrate formation mechanism. Evidence of local transport at the surface and regional transport aloft was found; transport processes also varied among the species. The distribution of BC appeared to be regional, and BC was often uniformly mixed vertically. Overall, the combination of time-resolved tower and surface measurements provided important insight into PM stratification, formation, and transport.     

Understanding the Effectiveness of Precursor Reductions in Lowering 8-Hr Ozone Concentrations—Part II. The Eastern United States

Abstract

Analyses of ozone (O₃) measurements in conjunction with photochemical modeling were used to assess the feasibility of attaining the federal 8-hr O₃ standard in the eastern United States. Various combinations of volatile organic compound (VOC) and oxides of nitrogen (NO_x) emission reductions were effective in lowering modeled peak 1-hr O₃ concentrations. VOC emissions reductions alone had only a modest impact on modeled peak 8-hr O₃ concentrations. Anthropogenic NO_x emissions reductions of 46–86% of 1996 base case values were needed to reach the level of the 8-hr standard in some areas. As NO_x emissions are reduced, O₃ production efficiency increases, which accounts for the less than proportional response of calculated 8-hr O₃ levels. Such increases in O₃ production efficiency also were noted in previous modeling work for central California. O₃ production in some urban core areas, such as New York City and Chicago, IL, was found to be VOC-limited. In these areas, moderate NO_x emissions reductions may be accompanied by increases in peak 8-hr O₃ levels. The findings help to explain differences in historical trends in 1- and 8-hr O₃ levels and have serious implications for the feasibility of attaining the 8-hr O₃ standard in several areas of the eastern United States.     

Combined MODFLOW‐FRACTRAN Application to Assess Chlorinated Solvent Transport and Remediation in Fractured Sedimentary Rock

Detailed field investigations and numerical modeling were conducted to evaluate transport and fate of chlorinated solvent contamination in a fractured sedimentary bedrock aquifer (sandstone/siltstone/mudstone) at a Superfund site in central New Jersey. Field investigations provided information on the fractured rock system hydrogeology, including hydraulic gradients, bulk hydraulic conductivity, fracture network, and rock matrix, and on depth discrete contaminant distribution in fractures (via groundwater sampling) and matrix (via detailed subsampling of continuous cores). The numerical modeling endeavor involved application of both an equivalent porous media (EPM) model for flow and a discrete fracture network (DFN) model for transport. This combination of complementary models, informed by appropriate field data, allowed a quantitative representation of the conceptual site model (CSM) to assess relative importance of various processes, and to examine efficacy of remedial alternatives. Modeling progressed in two stages: first a large‐scale (20 km x 25 km domain) 3‐D EPM flow model (MODFLOW) was used to evaluate the bulk groundwater flow system and contaminant transport pathways under historic and current aquifer stress conditions and current stresses. Then, results of the flow model informed a 2‐D DFN transport model (FRACTRAN) to evaluate transport along a 1,000‐m flowpath from the source represented as a 2‐D vertical cross‐section. The combined model results were used to interpret and estimate the current and potential future extent of rock matrix and aqueous‐phase contaminant conditions and evaluate remedial strategies. Results of this study show strong effects of matrix diffusion and other processes on attenuating the plume such that future impacts on downgradient well fields under the hydraulic stresses modeled should be negligible. Results also showed futility of source remediation efforts in the fractured rock, and supported a technical impracticability (TI) waiver for the site. © 2013 Wiley Periodicals, Inc.     

Influence of mercury and selenium chemistries on the progression of cardiomyopathy in pygmy sperm whales, Kogia breviceps

More than half of pygmy sperm whales (Kogia breviceps) that strand exhibit signs of cardiomyopathy (CMP). Many factors may contribute to the development of idiopathic CMP in K. breviceps, including genetics, infectious agents, contaminants, biotoxins, and dietary intake (e.g. selenium, mercury, and pro-oxidants). This study assessed trace elements in K. breviceps at various stages of CMP progression using fresh frozen liver and heart samples collected from individuals that stranded along US Atlantic and Gulf coasts between 1993 and 2007. Standard addition calibration and collision cell inductively coupled plasma mass spectrometry (ICP-MS) were employed for total Se analysis and pyrolysis atomic absorption (AA) was utilized for total Hg analysis to examine if the Se/Hg detoxification pathway inhibits the bioavailability of Se. Double spike speciated isotope dilution gas chromatography ICP-MS was utilized to measure methyl Hg and inorganic Hg. Immunoblot detection and colorimetric assays were used to assess protein oxidation status. Data collected on trace elements, selenoproteins, and oxidative status were evaluated in the context of animal life history and other complementary histological information to gain insight into the biochemical pathways contributing to the development of CMP in K. breviceps. Cardiomyopathy was only observed in adult pygmy sperm whales, predominantly in male animals. Both Hg:Se molar ratios and overall protein oxidation were greater in males than females and increased with progression of CMP.     

Variably saturated flow and multicomponent biogeochemical reactive transport modeling of a uranium bioremediation field experiment

Three-dimensional, coupled variably saturated flow and biogeochemical reactive transport modeling of a 2008 in situ uranium bioremediation field experiment is used to better understand the interplay of transport and biogeochemical reactions controlling uranium behavior under pulsed acetate amendment, seasonal water table variation, spatially variable physical (hydraulic conductivity, porosity) and geochemical (reactive surface area) material properties. While the simulation of the 2008 Big Rusty acetate biostimulation field experiment in Rifle, Colorado was generally consistent with behaviors identified in previous field experiments at the Rifle IFRC site, the additional process and property detail provided several new insights. A principal conclusion from this work is that uranium bioreduction is most effective when acetate, in excess of the sulfate-reducing bacteria demand, is available to the metal-reducing bacteria. The inclusion of an initially small population of slow growing sulfate-reducing bacteria identified in proteomic analyses led to an additional source of Fe(II) from the dissolution of Fe(III) minerals promoted by biogenic sulfide. The falling water table during the experiment significantly reduced the saturated thickness of the aquifer and resulted in reactants and products, as well as unmitigated uranium, in the newly unsaturated vadose zone. High permeability sandy gravel structures resulted in locally high flow rates in the vicinity of injection wells that increased acetate dilution. In downgradient locations, these structures created preferential flow paths for acetate delivery that enhanced local zones of TEAP reactivity and subsidiary reactions. Conversely, smaller transport rates associated with the lower permeability lithofacies (e.g., fine) and vadose zone were shown to limit acetate access and reaction. Once accessed by acetate, however, these same zones limited subsequent acetate dilution and provided longer residence times that resulted in higher concentrations of TEAP reaction products when terminal electron donors and acceptors were not limiting. Finally, facies-based porosity and reactive surface area variations were shown to affect aqueous uranium concentration distributions with localized effects of the fine lithofacies having the largest impact on U(VI) surface complexation. The ability to model the comprehensive biogeochemical reaction network, and spatially and temporally variable processes, properties, and conditions controlling uranium behavior during engineered bioremediation in the naturally complex Rifle IFRC subsurface system required a subsurface simulator that could use the large memory and computational performance of a massively parallel computer. In this case, the eSTOMP simulator, operating on 128 processor cores for 12h, was used to simulate the 110-day field experiment and 50 days of post-biostimulation behavior.