Sand Fences in the Coastal Zone: Intended and Unintended Effects

Sand-trapping fences modify the character of the coastal landscape and change its spatial structure, image, and meaning. This paper examines the relationship between these changes and fence usage at the municipal level, where most decisions about fence deployment are made. Use of fences in 29 municipalities on the developed coast of New Jersey is examined over a 6-year period. Interviews with municipal officers indicate that wooden slat sand-trapping fences are used primarily to build dunes to provide protection against wave uprush and flooding, but they are also used to control pedestrian traffic and demarcate territory. These uses result in changes in landforms and habitats. An aerial video inventory of fences taken in 2002 indicates that 82% of the shoreline had fences and 72% had dunes. Single and double straight fence rows are the most commonly used. Fences are often built to accomplish a specific primary purpose, but they can cause many different and often unanticipated changes to the landscape. The effects of a sand fence change through time as the initial structure traps sand, creates a dune that is colonized by vegetation, and becomes integrated into the environment by increasing topographic variability and aesthetic and habitat value. Sand fences can be made more compatible with natural processes by not placing them in locations where sources of wind blown sand are restricted or in unnatural shore perpendicular orientations. Symbolic fences are less expensive, are easy to replace when damaged, are less visually intrusive, and can be used for controlling pedestrian access.     

An assessment of acute biomarker responses in the demersal catfish Cathorops spixii after the Vicuña Oil Spill in a harbour estuarine area in Southern Brazil

The Vicuña oil tanker exploded in Paranaguá Bay (South of Brazil), during methanol unloading operations in front of Paranaguá Harbour, on November 15th, 2004, releasing a large amount of bunker oil and methanol. Two weeks after the accident, the acute effects of the Vicuña Oil Spill (VOS) were evaluated in the demersal catfish Cathorops spixii, comparing a contaminated (at the spill site) and a reference site inside the Bay. Data were compared to previous measurements, taken before the accident, in the same species, from the same sites. The physiological biomarkers were the ones that best reflected acute effects of the spill: plasma osmolality, chloride, calcium, magnesium, and potassium. Morphological (liver and gill histopathology) and genetic (piscine micronucleus and DNA strand breaks) biomarkers revealed that damage was already present in fishes from both reference and contaminated sites inside the Bay. Thus, the reference site is not devoid of contamination, as water circulation tends to spread the contaminants released into other areas of the Bay. Acute field surveys of oil spill effects in harbour areas with a long history of contamination should thus be viewed with caution, and whenever possible previous evaluations should be considered for proper appraisal of biomarker sensitivity, especially in mobile bioindicators such as fish.     

Use of neural networks for monitoring surface water quality changes in a neotropical urban stream

This paper reports the using of neural networks for water quality analysis in a tropical urban stream before (2002) and after sewerage building and the completion of point-source control-based sanitation program (2003). Mathematical modeling divided water quality data in two categories: (a) input of some in situ water quality variables (temperature, pH, O2 concentration, O2 saturation and electrical conductivity) and (b) water chemical composition (N-NO2(-); N-NO3(-); N-NH4(+) Total-N; P-PO4(3-); K+; Ca2+; Mg+2; Cu2+; Zn2+ and Fe+3) as the output from tested models. Stream water data come from fortnightly sampling in five points along the Ipanema stream (Southeast Brazil, Minas Gerais state) plus two points downstream and upstream Ipanema discharge into Doce River. Once the best models are consistent with variables behavior we suggest that neural networking shows potential as a methodology to enhance guidelines for urban streams restoration, conservation and management.     

A proposed impact assessment method for genetically modified plants (AS-GMP Method)

An essential step in the development of products based on biotechnology is an assessment of their potential economic impacts and safety, including an evaluation of the potential impact of transgenic crops and practices related to their cultivation on the environment and human or animal health. The purpose of this paper is to provide an assessment method to evaluate the impact of biotechnologies that uses quantifiable parameters and allows a comparative analysis between conventional technology and technologies using GMOs. This paper introduces a method to perform an impact analysis associated with the commercial release and use of genetically modified plants, the Assessment System GMP Method. The assessment is performed through indicators that are arranged according to their dimension criterion likewise: environmental, economic, social, capability and institutional approach. To perform an accurate evaluation of the GMP specific indicators related to genetic modification are grouped in common fields: genetic insert features, GM plant features, gene flow, food/feed field, introduction of the GMP, unexpected occurrences and specific indicators. The novelty is the possibility to include specific parameters to the biotechnology under assessment. In this case by case analysis the factors of moderation and the indexes are parameterized to perform an available assessment.     

Artisanal fisheries of the Itaparica reservoir,São Francisco River,Brazil: socioeconomic profile,environmental dynamics,and management recommendations

Currently, artisanal fisheries in fresh water reservoirs have been losing ground to commercial fish farming and a great deal of fishery resources are being threatened by human interventions, such as reservoir management and increasing net-cage aquaculture. This study aims to understand the impacts of environmental changes on fishery resources and analyse the migratory fish breeding season as a missing link for fishery management in the semi-arid area of the São Francisco River Basin. Among the 870 fishermen operating in the Pernambuco part of the Itaparica Reservoir, 10% were interviewed and affirmed that fish stocks have been compromised due to the closed fishing period’s incoherence, exotic species insertion, and changes to the river flow caused by reservoir construction and operation. A significant correlation was observed between the Reproductive Activity Index (RAI) and precipitation (p?=?0.745) as well as between the RAI and the river’s flow (p?=??0.909). This shows how important it is to consider both the semi-arid climate setting and reservoir operation in determining the closed period which should safeguard fish reproduction. Monitoring the fish reproduction period and research on the reproductive biology of native fish species is needed in the São Francisco River Basin’s different stretches in order to guarantee valuable fish stocks and fisheries maintenance. Integrated action between the fish resource users, civil society, and federal bodies/agencies is essential in order to mitigate impacts and improve fish production systems, not only in Brazil, but in other regions experiencing a similar scenario.     

Dibenzothiophene oxidation by horseradish peroxidase in organic media: effect of the DBT:H2O2 molar ratio and H2O2 addition mode

Its is well known that in the biodesulfurization (BDS) process the low water solubility of sulfur compounds hinders its transference from the oil phase to the cells being the rate-limiting step in the metabolism of dibenzothiophenes (DBT). Thus sulfur compounds derivatives with high water solubility could be more easily transported increasing the BDS efficiency. The present work performed a stepwise evaluation of the enzymatic oxidation of DBT by horseradish peroxidase (HRP). Reactions were carried out in monophasic organic media containing 25% (v/v) acetonitrile. The following parameters were evaluated: DBT:H2O2 molar ratio (1:1-1:20); H2O2 addition mode (single or stepwise); pH (6.0-8.0) and temperature (37-50 degrees C). Best results were observed in a reaction medium at pH 8.0 presenting HRP 0.06IUml(-1), DBT 0.267mM, DBT:H2O2 molar ratio of 1:20 (stepwise hydrogen peroxide addition) and incubated at 45 degrees C for 60min. Under these conditions 60% of DBT was converted into dibenzothiophene sulfoxide (12%) and dibenzothiophene sulfone (46%). The DBT oxidation rate observed in this work, of 5mmolmin(-1)g(-1) of HRP, was 250-fold higher than the BDS rate, 20mumolmin(-1)g(-1) of catalyst. As such a combined enzyme-microbial desulfurization process could be envisaged. Products were determined by HPLC RP C-18.     

Metallothionein levels in Algerian mice (Mus spretus) exposed to elemental pollution: an ecophysiological approach

The potential use of metallothioneins (MTs) as biomarkers of trace metal contamination was evaluated for the first time in the Algerian mouse (Mus spretus). Mice were collected seasonally in an abandoned mining area (Aljustrel) and in a reference area, both located in southern Portugal. MT levels were quantified in liver and kidney by differential pulse polarography and hepatic elemental concentrations (Mn, Fe, Cu, Zn, Se) were determined by particle-induced X-ray emission. Hepatic iron and selenium concentrations were elevated in mice from Aljustrel mine when compared to reference animals. MTs levels were averagely higher in mice from Aljustrel than those originated from the reference area. A season-dependent significant effect was found on the hepatic and renal MT concentrations, characterized by higher levels in winter and lower in autumn. In contaminated mice positive relationship between liver elemental contents (Cu in autumn and Fe in winter) and MTs were found. The seasonal variation of MT suggests that probably physiological and environmental factors could influence hepatic and renal MT induction. Results seem to imply that some environmental disturbance occur in the vicinity of the Aljustrel mine. Therefore, for the management purposes MT levels should be followed in liver of M. spretus, especially in winter. Furthermore, other physiological factors that could influence MT expression and turnover in Algerian mouse should also be monitored.     

Soil vapor extraction in sandy soils: influence of airflow rate

Airflow rate is one of the most important parameters for the soil vapor extraction of contaminated sites, due to its direct influence on the mass transfer occurring during the remediation process. This work reports the study of airflow rate influence on soil vapor extractions, performed in sandy soils contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene. The objectives were: (i) to analyze the influence of airflow rate on the process; (ii) to develop a methodology to predict the remediation time and the remediation efficiency; and (iii) to select the most efficient airflow rate. For dry sandy soils with negligible contents of clay and natural organic matter, containing the contaminants previously cited, it was concluded that: (i) if equilibrium between the pollutants and the different phases present in the soil matrix was reached and if slow diffusion effects did not occur, higher airflow rates exhibited the fastest remediations, (ii) it was possible to predict the remediation time and the efficiency of remediation with errors below 14%; and (iii) the most efficient remediation were reached with airflow rates below 1.2 cm(3)s(-1) standard temperature and pressure conditions.     

Influence of humic substances on the photolysis of aqueous pesticide residues

The present work investigated the direct and indirect photolysis of pesticide residues (atrazine, imazaquin, iprodione), in aqueous solutions and under UV-visible radiation (280-480nm). Different kinds of humic substances (HS) were added to samples in order to evaluate their behaviour as possible photocatalysts and their effect on the photolysis of pesticides. The fulvic acids were purchased from the International Humic Substances Society, and they were added to samples in concentrations ranging from 1 to 150 mgl(-1). Titanium dioxide was used as the photocatalyst, in concentration ranging from 10 to 150 mgl(-1). Pesticides photolysis were measured by UV-visible absorption spectroscopy and differential pulse polarography with all used pesticides, reaching total degradation after 2h of irradiation, thus indicating a fast direct photolysis. Photocatalysis by TiO(2) could increase the pesticides photolysis rate up to 40%. This effect, however, was not observed for imazaquin photolysis. Again, except for imazaquin, HS presence showed a positive effect in increasing pesticide degradation, but only within specific concentration ranges (below 10mg l(-1) for iprodione and about 30mgl(-1) for atrazine). Above these ranges HS induce a decrease in the pesticides photolysis rate. Spin-trapping measurements by electronic paramagnetic resonance spectroscopy, using the spin-trap DMPO, showed that HS are able to photogenerate hydroxyl radicals, increasing the pesticides molecule degradation. However, the HS also react with the photogenerated hydroxyl radical, influencing the pesticide photolysis, leading to a decrease in the photolysis rate and causing it to be strongly dependent on the nature and concentration of residues in the water to be treated.     

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.