A review of atmospheric mercury emissions,pollution and control in China

Mercury, as a global pollutant, has significant impacts on the environment and human health. The current state of atmospheric mercury emissions, pollution and control in China is comprehensively reviewed in this paper. With about 500-800 t of anthropogenic mercury emissions, China contributes 25%-40% to the global mercury emissions. The dominant mercury emission sources in China are coal combustion, non-ferrous metal smelting, cement production and iron and steel production. The mercury emissions from natural sources in China are equivalent to the anthropogenic mercury emissions. The atmospheric mercury concentration in China is about 2-10 times the background level of North Hemisphere. The mercury deposition fluxes in remote areas in China are usually in the range of 10-50μg·m^-2·yr^-1. To reduce mercury emissions, legislations have been enacted for power plants, non-ferrous metal smelters and waste incinerators. Currently mercury contented in the flue gas is mainly removed through existing air pollution control devices for sulfur dioxide, nitrogen oxides, and particles. Dedicated mercury control technologies are required in the future to further mitigate the mercury emissions in China.     

Photo-polymerization of triclosan in aqueous solution induced by ultraviolet radiation

The formation of 2,8-dichlorodibenzo-p-dioxin and other harmful degradation products in the photo-degradation process of triclosan is of increasing concern. Here we worked on the identification of polymerized products at high triclosan concentration and on the mechanism of photoreaction. Five dimmers and two trimers of triclosan were detected by liquid chromatography-mass spectrum analysis. 2,8-dichlorodibenzo-p-dioxin was also identified by comparing with an authentic standard. Relatively low pH and high concentration favored the polymerization of triclosan. Three main routes of photoreaction were postulated, namely dechlorination, ring closure and polymerization.     

Effects of an iron-silicon material,a synthetic zeolite and an alkaline clay on vegetable uptake of As and Cd from a polluted agricultural soil and proposed remediation mechanisms

Economic and highly effective methods of in situ remediation of Cd and As polluted farmland in mining areas are urgently needed. Pot experiments with Brassica chinensis L. were carried out to determine the effects of three soil amendments [a novel iron-silicon material (ISM), a synthetic zeolite (SZ) and an alkaline clay (AC)] on vegetable uptake of As and Cd. SEM–EDS and XRD analyses were used to investigate the remediation mechanisms involved. Amendment with ISM significantly reduced the concentrations of As and Cd in edible parts of B. chinensis (by 84–94 % and 38–87 %, respectively), to levels that met food safety regulations and was much lower than those achieved by SZ and AC. ISM also significantly increased fresh biomass by 169–1412 % and 436–731 % in two consecutive growing seasons, while SZ and AC did not significantly affect vegetable growth. Correlation analysis suggested that it was the mitigating effects of ISM on soil acidity and on As and Cd toxicity, rather than nutrient amelioration, that contributed to the improvement in plant growth. SEM–EDS analysis showed that ISM contained far more Ca, Fe and Mn than did SZ or AC, and XRD analysis showed that in the ISM these elements were primarily in the form of silicates, oxides and phosphates that had high capacities for chemisorption of metal(loid)s. After incubation with solutions containing 800 mg L^?1 AsO₄ ^2? or Cd²⁺, ISM bound distinctly higher levels of As (6.18 % in relative mass percent by EDS analysis) and Cd (7.21 % in relative mass percent by EDS analysis) compared to SZ and AC. XRD analysis also showed that ISM facilitated the precipitation of Cd²⁺ as silicates, phosphates and hydroxides, and that arsenate combined with Fe, Al, Ca and Mg to form insoluble arsenate compounds. These precipitation mechanisms were much more active in ISM than in SZ or AC. Due to the greater pH elevation caused by the abundant calcium silicate, chemisorption and precipitation mechanisms in ISM treatments could be further enhanced. That heavy metal(loid)s fixation mechanisms of ISM ensure the remediation more irreversible and more resilient to environmental changes. With appropriate application rate and proper nutrients supplement, the readily available and economic ISM is a very promising amendment for safe crop production on multi-metal(loids) polluted soils.     

不透明红球菌转化合成α-酮异己酸的培养条件优化

利用基于非完全平衡块原理的Plackett-Burman法和响应面法对不透明红球菌(Rhodococcus opacus DSM 43250)转化合成α-酮异己酸(KIC)的培养条件进行优化,以提高KIC的产量.首先采用Plackett-Burman(PB)设计对影响KIC产量的6个因素的效应进行评价,筛选出具有显著影响的关键因素——接种量、装液量和初始pH,然后通过最陡爬坡实验和Box-Behnken实验设计对关键因素的最佳水平范围进行研究,并利用SAS软件回归分析建立了二次多项式模型,通过模型求解确定最佳培养条件为:接种量6.93%,装液量33.38 mL,初始pH 7.6.在优化后的培养条件下,KIC的理论最高产量为31.08 mg/L,在验证实验中KIC最高产量为30.97 mg/L,比初始产量23.93 mg/L提高了29.42%,为进一步的发酵放大奠定了基础.图3表7参16     

Abundance,distribution and prey composition of scyphomedusae in the southern North Sea

The annual cycle of abundance and distribution of the scyphozoan medusae Aurelia aurita, Cyanea lamarckii, C. capillata and Chrysaora hysoscella were studied in the southern North Sea in 2004 and 2005. Three different patterns of seasonal occurrence of medusae were distinguished: (1) the early occurring C. lamarckii (February–August), (2) C. capillata and A. aurita (April–August) and (3) the late appearing C. hysoscella (July/August–September). Cyanea lamarckii was the most frequently encountered species in this study; its highest mean abundance was 1.8 ± 2.7 ind. 100 m⁻³. The prey spectra of C. lamarckii, C. capillata and C. hysoscella contained several copepod and other crustacean species and thus make them potential competitors with fish larvae. Medusae in this study also consumed fish eggs and larvae, including clupeids, in all months analysed. Although peak spawning of sprat (Sprattus sprattus) coincides with the maximum abundance of medusae (May–June) the relative low abundance of all medusae species in this study makes jellyfish predation unlikely to be a factor controlling sprat recruitment in the time frame investigated.     

Formation of disinfection byproducts from accumulated soluble products of oleaginous microalga after chlorination

When microalgae are simultaneously applied for wastewater treatment and lipid production, soluble algal products (SAP) should be paid much attention, as they are important precursors for formation of disinfection byproducts (DBPs), which have potential risks for human health. Chlorella sp. HQ is an oleaginous microalga that can generate SAP during growth, especially in the exponential phase. This study investigated the contribution of SAP from Chlorella sp. HQ to DBP formation after chlorination. The predominant DBP precursors from SAP were identified with the 3D excitation-emission matrix fluorescence. After chlorination, a significant reduction was observed in the fluorescence intensity of five specific fluorescence regions, particularly aromatic proteins and soluble microbial by-product-like regions, accompanied with slight shifting of the peak. The produced DBPs were demonstrated to include trihalomethanes and haloacetic acids. As the algal cultivation time was extended in wastewater, the accumulated SAP strengthened the formation of DBPs. The trend for DBP formation was as follows: chloroform>dichloroacetic acid>trichloroacetic acid.

Open image in new window

     

Wastewater management in small- and medium-size enterprises: case studies

Wastewater management in small and medium-sized enterprises representing the chemical and food industries was investigated. The results showed that wastewater discharged from an ink-production factory was highly contaminated with organic pollutants. Anaerobic biological treatment followed by chemical coagulation using ferric chloride aided with lime proved to be very effective and produced an effluent that complied with national regulatory standard for wastewater discharge into public sewage network. Also, management of wastewater from a confectionery factory representing the food sector was carried out. Aerobic biological treatment using plastic-packed trickling filter proved to be an effective treatment method. However, application of in-plant control measures alleviated the requirement for the construction of a wastewater treatment plant. The applied pollution prevention and cleaner production measures involved good housekeeping, recovery of spent chocolate, modification of floor cleaning and installation of suction devices for the removal of sugar and starch powders. All improvement measures were documented by cost/benefit analysis.     

Changing effluent chemistry affect survival,growth and physiological function of <Emphasis Type="Italic">Acacia nilotica</Emphasis> seedlings in northwestern region of India

Recycling and conservation efforts for water are the need of the day because of the lack of new water sources and the ever-increasing demand for drinking water. Seedlings of Acacia nilotica L. were irrigated with: canal water (T₁, control); municipal effluent (T₂); textile effluent (T₃); steel effluent (T₄); textile + municipal effluent in 1:1 ratio (T₅); steel + municipal effluent in 1:2 ratio (T₆); steel + textile in 1:2 ratio (T₈) and steel + municipal + textile in 1:2:2 ratio (T₇) with views to observe effluents effect on the seedlings and its adaptability and to recommend safe disposal of these effluents. Seedlings in T₆, T₇ and T₈ showed 50% lesser height and collar diameter than those in control. Seedlings in T₂ attained greatest height, collar diameter, numbers of branches and produced 140 g dry biomass seedling⁻¹. Highest concentration of manganese (Mn), iron (Fe), copper (Cu) and zinc (Zn) and lowest concentration of nitrogen (N), phosphorus (P), potassium (K), calcium (Ca) and magnesium (Mg) in the seedlings of T₄, T₆, T₇ and T₈ resulted in nutritional imbalance, mineral toxicity and reduction in photosynthetic (Pn) and transpiration (E) rates and caused seedling mortality. Seedlings of T₃ had highest sodium concentration and low concentration of Ca, Mg and micronutrients resulting in nutritional imbalance, augmented chlorosis and reduced gas exchange and biomass by half as compared to control. Increased growth, Pn and E and biomass in seedlings of T₅ over T₃ and survival period in T₆, T₇ and T₈ seedlings suggested a beneficial effect of effluents mixing. Unscientific disposal should be avoided and toxic concentration of metal ions␣may be reduced for long-term application and harmless disposal of effluents in afforestation and urban development.     

Assessment of <Emphasis Type="Italic">Gmelina arborea</Emphasis> sawdust–cement-bonded rainwater storage tank

The performance of a mixture of a forest bye product and cement for the production of storage structure for harvested rainwater was assessed. Three mix ratios of Cement: Gmelina arborea sawdust 3.0:1.0 (specimen A), 2.5:1.0 (specimen B) and 2.0:1.0 (specimen C) were considered. Engineering properties and dimensional stability of the different mix-ratios were monitored from prototypes cylindrical pots and test billet specimens. Possible change in quality of stored rainwater, with time was monitored in all the three cases. Water quality parameters monitored include pH, hardness, total suspended solids, alkalinity, acidity and total dissolved CO₂. The tensile stress obtained were 110, 104, and 95 N/mm², while the compressive strength were 5,000, 3,000, and 2,000 kN for specimens A, B and C respectively. Accelerated aging test showed that sample A were more resistant to deformation, while specimen C were more susceptible to change in structure over time. Similarly, the values of tensile and compressive strength after accelerated aging test increased in the order of specimen A > B > C. Except in specimen C where significant differences in alkalinity and acidity were observed, there were no significant differences in quality of the water stored in the pots after 2 months of storage. The results indicate the suitability of the Gmelina arborea waste as an alternative in constructing water storage structures in rural communities.