Simulation of a 100-MW solar-powered thermo-chemical air separation system combined with an oxy-fuel power plant for bio-energy with carbon capture and storage (BECCS)

The combination of concentrated solar power–chemical looping air separation (CSP-CLAS) with an oxy-fuel combustion process for carbon dioxide (CO₂) capture is a novel system to generate electricity from solar power and biomass while being able to store solar power efficiently. In this study, the computer program Advanced System for Process Engineering Plus (ASPEN Plus) was used to develop models to assess the process performance of such a process with manganese (Mn)-based oxygen carriers on alumina (Al₂O₃) support for a location in the region of Seville in Spain, using real solar beam irradiance and electricity demand data. It was shown that the utilisation of olive tree prunings (Olea europaea) as the fuel—an agricultural residue produced locally—results in negative CO₂ emissions (a net removal of CO₂ from the atmosphere). Furthermore, it was found that the process with an annual average electricity output of 18 MW would utilise 2.43% of Andalusia’s olive tree prunings, thereby capturing 260.5 k-tonnes of CO₂, annually. Drawbacks of the system are its relatively high complexity, a significant energy penalty in the CLAS process associated with the steam requirements for the loop-seal fluidisation, and the gas storage requirements. Nevertheless, the utilisation of agricultural residues is highly promising, and given the large quantities produced globally (~?4 billion tonnes/year), it is suggested that other novel processes tailored to these fuels should be investigated, under consideration of a future price on CO₂ emissions, integration potential with a likely electricity grid system, and based on the local conditions and real data.

     

Mesoporous WO3-graphene photocatalyst for photocatalytic degradation of Methylene Blue dye under visible light illumination

Advanced oxidation technologies are a friendly environmental approach for the remediation of industrial wastewaters. Here, one pot synthesis of mesoporous WO_3 and WO_3-graphene oxide(GO) nanocomposites has been performed through the sol–gel method. Then, platinum(Pt) nanoparticles were deposited onto the WO_3 and WO_3-GO nanocomposite through photochemical reduction to produce mesoporous Pt/WO_3 and Pt/WO_3-GO nanocomposites. X-ray diffraction(XRD) findings exhibit a formation of monoclinic and triclinic WO_3 phases. Transmission Electron Microscope(TEM) images of Pt/WO_3-GO nanocomposites exhibited that WO_3 nanoparticles are obviously agglomerated and the particle sizes of Pt and WO_3 are ~ 10 nm and 20–50 nm, respectively. The mesoporous Pt/WO_3 and Pt/WO_3-GO nanocomposites were assessed for photocatalytic degradation of Methylene Blue(MB) as a probe molecule under visible light illumination.The findings showed that mesoporous Pt/WO_3, WO_3-GO and Pt/WO_3-GO nanocomposites exhibited much higher photocatalytic efficiencies than the pure WO_3. The photodegradation rates by mesoporous Pt/WO_3-GO nanocomposites are 3, 2 and 1.15 times greater than those by mesoporous WO_3, WO_3-GO, and Pt/WO_3, respectively. The key factors of the enhanced photocatalytic performance of Pt/WO_3-GO nanocomposites could be explained by the highly freedom electron transfer through the synergetic effect between WO_3 and GO sheets, in addition to the Pt nanoparticles that act as active sites for O2 reduction, which suppresses the electron hole pair recombination in the Pt/WO_3-GO nanocomposites.     

Diapause embryos in the neustonic copepodAnomalocera patersoni

The neustonic copepodAnomalocera patersoni Templeton, collected from the Gulf of Naples from January to May 1988, laid subitaneous and diapause eggs that were of equal size and dark and smooth in appearance. In January and February, most eggs were subitaneous and hatched within 2 to 3 d at room temperature. Conspicuous numbers of diapause eggs were first obtained in February when several clutches contained a second egg type which did not hatch in a subitaneous manner. By March and April, most clutches contained only diapause eggs. Transmission electron microscope studies of subitaneous and diapause eggs revealed striking morphological differences. Subitaneous eggs had a thin vitelline coat covering the plasma membrane, whereas diapause eggs were enveloped by a complex four-layer structure which is assembled after spawning and which probably serves as a protective shell during dormancy. No major morphological differences were discernible in the oogenic cycle of females spawning either of the two egg types. Diapause eggs were shown to be embryos in early stages of development, and segmentation of these embryos was arrested for the entire 6-mo period of investigation. Diapause eggs hatched after 7 mo of dormancy.     

Mangrove forest structure and productivity in the Fly River estuary,Papua New Guinea

In April, July and August 1989 and February 1990, the delta region of the Fly River was surveyed to establish the aerial extent of mangrove forests, their species composition, tree densities and basal areas, and potential net primary production. Mangrove forests cover 87 400 ha, mainly on islands within the delta. Twentynine mangrove plant species were recorded, but there were only three major forest types in the delta.Rhizophora apiculata-Bruguiera parviflora forests (hereafterRhizophora-Bruguiera forests) predominated in regions where river water salinities were >10. These forests covered 31 500 ha and had mean total tree densities and basal areas of 2027 stems ha^–1 and 21 m² ha^–1, respectively. Forests of the palmNypa fruticans (hereafterNypa forests) covered 38 400 ha, mainly in regions where river salinities were ~1 to 10, and had mean total densities and basal areas of 4431 stems ha^–1 and 38 m² ha^–1, respectively. Forests dominated byAvicennia marina and/orSonneratia lanceolata (hereafterAvicennia-Sonneratia forests) predominated on accreting banks of sediment and covered 17 500 ha. In very low-salinity (< 1) regions there are large monospecific stands ofS. lanceolata. Mean total densities and basal areas forAvicennia-Sonneratia forests were 7036 stems ha^–1 and 22 m² ha^–1, respectively. Mean net primary productivity (kg C ha^–1 d^–1) was estimated to be 26.7, 27.1 and 19.0 forRhizophora-Bruguiera, Nypa andAvicennia-Sonneratia forests, respectively. Total daily net primary production by all mangrove forests was estimated at 2214 t carbon. Using assumptions based on work in tropical Australia, it was estimated that ~678 t carbon (or 31% of primary production) were exported daily from mangrove forests to the waters of the delta.Contribution No. 550 from the Australian Institute of Marine Science