异养硝化-好氧反硝化菌粪产碱杆菌的脱氮特性

为了对粪产碱杆菌(Alcaligenes faecalis No.4)的脱氮特性进行研究,提出了不同环境因子对菌株脱氮性能影响的对比实验。结果表明,该菌能利用柠檬酸钠和乙酸钠作为惟一碳源,以柠檬酸钠为碳源时脱氮活性最高,硝酸铵、氯化铵、碳酸铵和硫酸铵4种铵盐均能作为惟一氮源,而硝态氮和亚硝态氮几乎不能被该菌代谢转化;当温度在30~37℃、摇床转速超过120 r/min、p H为6~8之间时,该菌对氨氮的去除效果最好;该菌对高中低浓度的氨氮都具有很好的去除效果,对高浓度的氨氮有很好的耐受性;该菌对0%、3%盐度的适应期较短,对6%的盐度经过较长时间的适应期后,也能够快速地处理氨氮,具有良好的耐盐性。     

The influences of pH and ionic strength on the sorption of tylosin on goethite

As one of the widely used antibiotics in the world, the environmental risks of tylosin (TYL) received more and more attention. In order to assess its environmental fate and ecological effects accurately, it is necessary to understand the sorption properties of TYL on the soils/sediments. The sorption of TYL on goethite at different pH and ionic strength conditions were measured through a series of batch experiments and the sorption data of TYL were fitted by Freundlich and dual-mode sorption models. It was obvious that sorption was strongly dependent on pH and ionic strength. Sorption capacity of TYL increased as the pH increased and ionic strength decreased. The pH and ionic strength-dependent trends might be related with complexation between cationic/neutral TYL species and goethite. The sorption affinity of TYL on goethite decreased as ionic strength increased, which only occurred at higher TYL concentrations, suggested that inner complex might have dominated process at low concentrations and outer complex might occur at higher concentrations of TYL. Spectroscopic evidence indicated that tricarbonylamide and hydroxyl functional groups of TYL might be accounted for the sorption on mineral surfaces. The experimental data of TYL sorption could be fitted by surface complexation model (FITEQL), indicating that ≡FeOH with TYL interaction could be reasonably represented as a complex formation of a monoacid with discrete sites on goethite. The sorption mechanism of TYL might be related with surface complexation, electrostatic repulsion, and H-bounding on goethite. It should be noticed that the heterogeneous of sorption affinity of TYL on goethite at various environment to assess its environment risk.     

Positive matrix factorization as source apportionment of soil lead and cadmium around a battery plant (Changxing County,China)

Chemical compositions of soil samples are multivariate in nature and provide datasets suitable for the application of multivariate factor analytical techniques. One of the analytical techniques, the positive matrix factorization (PMF), uses a weighted least square by fitting the data matrix to determine the weights of the sources based on the error estimates of each data point. In this research, PMF was employed to apportion the sources of heavy metals in 104 soil samples taken within a 1-km radius of a lead battery plant contaminated site in Changxing County, Zhejiang Province, China. The site is heavily contaminated with high concentrations of lead (Pb) and cadmium (Cd). PMF successfully partitioned the variances into sources related to soil background, agronomic practices, and the lead battery plants combined with a geostatistical approach. It was estimated that the lead battery plants and the agronomic practices contributed 55.37 and 29.28 %, respectively, for soil Pb of the total source. Soil Cd mainly came from the lead battery plants (65.92 %), followed by the agronomic practices (21.65 %), and soil parent materials (12.43 %). This research indicates that PMF combined with geostatistics is a useful tool for source identification and apportionment.     

Characterization of the extracellular biodemulsifiers secreted by Bacillus cereus LH-6 and the enhancement of demulsifying efficiency by optimizing the cultivation conditions

A highly efficient demulsifying strain, LH-6, was isolated from petroleum-contaminated soil and identified as Bacillus cereus by 16S rDNA gene analysis. It achieved 95.61 and 95.40 % demulsifying ratios within 12 h for water-in-oil (W/O) and oil-in-water (O/W) model emulsions, respectively. Fourier transform infrared spectroscopy (FT-IR) and thin-layer chromatography (TLC) detections indicated that the LH-6’s extracellular biodemulsifiers were different types of lipopeptides for the W/O and O/W emulsions. Optimization of the culture medium composition was conducted to improve the biosynthesis and demulsifying efficiency of the biodemulsifier. The optimal carbon source was liquid paraffin, while waste frying oil could also be an alternative carbon source. The optimal nitrogen sources were ammonium sulfate and yeast extract. To further enhance the biodemulsifier efficiency, the optimal cultivation conditions were determined using response surface methodology (RSM) based on central composite rotation design (CCRD). Using the optimized cultivation conditions, the demulsifying ratios increased to 98.23 and 97.65 % for the W/O and O/W model emulsions, respectively.     

Carbamazepine, carbamazepine epoxide and dihydroxycarbamazepine sorption to soil and occurrence in a wastewater reuse site in Tunisia

Although a number of manufactured nanoparticles are applied for the medical and clinical purposes, the understanding of interaction between nanomaterials and biological systems are still insufficient. Using nematode Caenorhabditis elegans model organism, we here investigated the in vivo toxicity or safety of hydroxylated fullerene nanoparticles known to detoxify anti-cancer drug-induced oxidative damages in mammals. The survival ratio of C. elegans rapidly decreased by the uptake of nanoparticles from their L4 larval stage with resulting in shortened lifespan (20 d). Both reproduction rate and body size of C. elegans were also reduced after exposure to 100 μg mL⁻¹ of fullerol. We found ectopic cell corpses caused by apoptotic cell death in the adult worms grown with fullerol nanoparticles. By the mutation of core pro-apoptotic regulator genes, ced-3 and ced-4, these nanoparticle-induced cell death were significantly suppressed, and the viability of animals consequently increased despite of nanoparticle uptake. The apoptosis-mediated toxicity of nanoparticles particularly led to the disorder of digestion system in the animals containing a large number of undigested foods in their intestine. These results demonstrated that the water-soluble fullerol nanoparticles widely used in medicinal applications have a potential for inducing apoptotic cell death in multicellular organisms despite of their antioxidative detoxifying property.     

Determination of partition and diffusion coefficients of formaldehyde in selected building materials and impact of relative humidity

The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, "green" gypsum wallboard, and "green" carpet) under three relative humidity (RH) conditions (20%, 50%, and 70% RH). The "green" materials contained recycled materials and were friendly to environment. A dynamic dual-chamber test method was used. Results showed that a higher relative humidity led to a larger effective diffusion coefficient for two kinds of wallboards and carpet. The carpet was also found to be very permeable resulting in an effective diffusion coefficient at the same order of magnitude with the formaldehyde diffusion coefficient in air. The partition coefficient (K(ma)) of formaldehyde in conventional wallboard was 1.52 times larger at 50% RH than at 20% RH, whereas it decreased slightly from 50% to 70% RH, presumably due to the combined effects of water solubility of formaldehyde and micro-pore blocking by condensed moisture at the high RH level. The partition coefficient of formaldehyde increased slightly with the increase of relative humidity in "green" wallboard and "green" carpet. At the same relative humidity level, the "green" wallboard had larger partition coefficient and effective diffusion coefficient than the conventional wallboard, presumably due to the micro-pore structure differences between the two materials. The data generated could be used to assess the sorption effects of formaldehyde on building materials and to evaluate its impact on the formaldehyde concentration in buildings.     

山地城市暴雨径流污染特性及控制对策

为了解山城重庆的暴雨径流污染特性,充实国内仍然薄弱的基础资料,对4种用地类型的4场暴雨进行了监测,测试指标包括TSS、COD、TP、TN和NH3-N。结果表明,对于坡度2.5%的交通干道和坡度30%的校园人行道,从污染物浓度降幅的角度考虑初期径流的控制量应分别为2～3 mm和1.8 mm。随降雨时间的延长,路面污染物浓度迅速降低,坡度越大,降低速率越快。对于平均浓度,校园屋顶和草坪的各污染物浓度均达到地表水环境质量Ⅴ类标准(总氮和氨氮除外)。交通干道和校园人行道的总磷平均浓度也满足地表水环境质量Ⅴ类标准,但2种下垫面的COD、TN和氨氮平均浓度分别超出地表水环境质量Ⅴ类标准的2～8倍、1.9～3.1倍和1.9～4.3倍。对于交通干道,场次降雨径流的总氮、总磷和氨氮平均浓度与初期浓度的比值和污染物浓度20 min降幅接近(分别为0.5～0.53和50%～55%)接近,而COD和TSS平均浓度与初期浓度的比值和污染物浓度20 min降幅相近(分别为0.35～0.37和78%～84%)。对于校园人行道,污染物浓度20 min降幅均达到90%以上(90%～96%),场次降雨径流的总氮、总磷、氨氮、COD和TSS的平均浓度与初期浓度的比值接近(0.3～0.4)。研究结果为山地城市暴雨径流的污染控制提供了参考。     

滇池湖湾大水域种养水葫芦对水质的影响分析

为了探讨大水域种养水葫芦对滇池湖湾水质的影响,于2010年8—10月对滇池白山湾约70 hm2水葫芦种养区域的水质特征进行动态监测。结果表明,水葫芦区水体中总磷、总氮及高锰酸钾指数从9月中旬后开始逐步上升。水葫芦区水体溶解氧、pH较近水葫芦区和远水葫芦区显著降低,但水葫芦区溶解氧仍维持在较高水平;总磷、总氮及高锰酸钾指数较近水葫芦区和远水葫芦区显著升高;在水葫芦周围水体（近水葫芦区）水质得到明显改善,表现为水体透明度显著高于水葫芦区及远水葫芦区,总磷、正磷酸盐、总氮及叶绿素a明显低于水葫芦区及远水葫芦区。     

基于主成分分析法的武汉城市圈区域协调发展研究

在"两型社会"背景下,如何实现武汉城市圈的快速发展及圈内的协调发展是促进武汉城市圈建设与发展的重要内容,也是构建中国中部区域板块新经济增长极的必然选择。采用统计数据、利用主成分分析法对武汉城市圈区域经济发展进行评价,利用数学模型对武汉城市圈区域发展的不平衡性与区域差异性进行分析,在此基础上提出发展地方特色经济,加强区域经济间的联系,实现产业一体化与经济一体化,建立统一的监督机构,实现武汉城市圈的协调发展。     

Impact of roadside noise barriers on particle size distributions and pollutants concentrations near freeways

Increasing epidemiological evidence has established an association between a host of adverse health effects and exposure to ambient particulate matter (PM) and co-pollutants, especially those emitted from motor vehicles. Although PM and their co-pollutants dispersion profiles near the open freeway have been extensively characterized by means of both experimental measurements and numerical simulations in recent years, such investigations near freeways with roadside barriers have not been well documented in the literature. A few previous studies suggested that the presence of roadside structures, such as noise barriers and vegetation, may impact the decay of pollutant concentrations downwind of the freeway by limiting the initial dispersion of traffic emissions and increasing their vertical mixing due to the upward deflection of airflow. Since the noise barriers are now common roadside features of the freeways, particularly those running through populated urban areas, it is pertinent to investigate the impact of their presence on the particles and co-pollutants concentrations in areas adjacent to busy roadways. This study investigated two highly trafficked freeways (I-710 and I-5) in Southern California, with two sampling sites for each freeway, one with and the other without the roadside noise barriers. Particle size distributions and co-pollutants concentrations were measured in the immediate proximity of freeways and at different distances downwind of the freeways. The results showed the formation of a “concentration deficit” zone in the immediate vicinity of the freeway with the presence of roadside noise barrier, followed by a surge of pollutant concentrations further downwind at 80–100 m away from freeway. The particle and co-pollutants concentrations reach background levels at farther distances of 250–400 m compared to 150–200 m at the sites without roadside noise barriers.