北山地区大气降水中水化学及稳定同位素特征

为揭示甘肃北山地区大气降水的水化学及同位素特征,利用2012~2019年度采集的97件大气降水样品,采用相关性分析,富集因子,气团后向轨迹分析等多种方法对北山地区稳定同位素变化特征及其影响因素,降水中主要离子变化特征,不同离子来源及贡献,水汽来源进行了分析.结果表明,北山地区区域降水线的斜率与截距均高于张掖地区大气降水线;该区降水中稳定同位素比率明显受季节性,温度和高程效应的影响,在年尺度下,降雨量效应不明显;该区降水中氘盈余变化较大,雨季降水中氘盈余显著小于旱季降水中氘盈余值;北山地区大气降水的水化学型主要为HCO₃·SO₄-Ca和HCO₃-Ca型,降水中离子浓度具有明显的季节性变化,降雨量的增加对离子浓度具有一定的稀释作用;Na⁺受海源和陆源物质的双重影响;绝大部分的Ca²⁺,K⁺,HCO₃^-和部分Mg²⁺来源于陆源,SO₄^2-与NO₃^-的主要来自于人类活动输入;区内冬夏季水汽来源基本一致,来源于西北方向的季风源是北山地区最主要的水汽来源.研究成果可为我国高放废物地质处置库选址和性能评价以及未来地下处置库建设提供依据,也有助于丰富西北干旱区的水文循环过程研究.     

铜合金实验室试验与实海挂片结果的比较与分析

目的比较实验室试验结果与实海挂片结果对B10和H62两种铜合金腐蚀性能评价的异同之处。方法采用线性极化、电化学阻抗、显微形貌观察等,比较两种铜合金在实验室模拟海水中的的腐蚀速率、点蚀倾向,结合反应机理、腐蚀形貌、环境等外部因素,分析导致实验室与实海环境下出现差异的原因。结果除榆林海域外,实海挂片与实验室结果都表明,B10试样的平均腐蚀速率小于H62。B10和H62两种铜合金随温度升高腐蚀速率增大,在实验室和实海情况下表现出一致性,且平均腐蚀速率都随浸泡时间的延长而降低。结论在实海环境中,温度不是影响点蚀的主要因素,微生物等其他环境因素会对点蚀产生较大影响。     

基于有限元分析的橡胶减振器优化设计

目的加快橡胶减振器的设计过程。方法分析橡胶材料及Mooney-Rivllin橡胶本构模型特点,介绍橡胶减振器应用特点及隔振设计的相关理论,采用Mooney-Rivllin模型模拟橡胶材料的力学特性,通过引进有限元优化技术,在设计初期保证减振器的刚度特性。结果在某设备减振设计中,采用单轴拉压曲线获取了橡胶材料的Mooney-Rivllin模型参数,以减振器的部分结构尺寸为设计参数,减振器的三向刚度为设计目标,获取了三轴向频率近似相等的隔振系统(轴向频率40 Hz、径向频率40.9 Hz)。通过试验测试,减振系统频率与试验值差别较小,其中轴向差别为2%,径向差别为1%。结论通过引进有限元优化技术,采用合理的橡胶本构模型,可以满足工程精度要求,加速了橡胶减振器的设计过程。     

水中Mg~(2+)的测试管快速测定

研制了一种测定水中Mg2 + 的测试管 ,测定范围为 0 .5mg/L～ 2 .0mg/L。该测试管适用于现场应急监测 ,具有快速、简便、抗干扰能力强和价格低廉等特点     

乌鲁木齐市餐饮业油烟污染的调查及防治初探

通过对乌鲁木齐市20家餐饮业油烟污染的调查分析，结果表明，乌鲁木齐市餐饮业油烟污染严重，并提出了防治措施。     

石河子市空气污染成因及防治对策

对石河子市空气环境质量状况进行了评价，对影响石河子市环境质量的主要因素进行了分析，得出石河子市空气污染属煤烟沙尘型，提出了相应的治理措施和建议。     

我国热带地区胶—茶—鸡农林复合系统物质循环研究

以海南省文昌市典型的胶—茶—鸡农林复合模式为研究对象 ,以单作胶园、胶茶间作园为对照 ,采用定量研究与定性分析相结合的方法 ,研究其物质循环规律。结果表明 ,胶—茶—鸡农林复合系统的氮、磷输入、输出量最大 ,系统外物质投入率比另两系统明显减少 ,系统内养分循环量增加 ,因此 ,该系统具有较合理的物质循环结构。     

LPWCO method for the treatment of high concentrated organic wastewater

Based on wet air oxidation (WAO) and Fenton reagent, thispaper raises a new low pressure wet catalytic oxidation(LPWCO)which requires low pressure for the treatment of highlyconcentrated and refractory organic wastewater. Compared withgeneral wet air oxidation, the pressure of the treatment(0.1-0.6MPa) is only one of tens to percentage of latter(3.5-10MPa). Inaddition, its temperature is no more than 180℃.Compared withFenton reagent, while H2O2/COD(weight ratio) less than 1.2, theremoval of COD in the treatment is over twenty percents more thanFenton's even the value of COD is more than 14000mg/L. In thispaper, we study the effect factor of COD removal and the mechanismof this treatment. The existence of synergistic effect (catalytic oxidation and carbonization) for COD removal in H2SO4-Fenton reagent system under the condition of applied pressure and heating (0.1-0.6MPa, 104-165℃) was verified. The best condition of this disposal are as follows:H2O2/COD(weight ratio)=0.2-1.0, Fe2+ 0.6×10-3 mol, H2SO4 0.5mol, COD>1×104mg/L, the operating pressure is 0.1-0.6MPa and temperature is 104-165℃. This method suit to dispose the high-concentrated refractory wastewater, especially to the wastewater containing H2SO produced in the manufacture of pesticide, dyestuff and petrochemical works.     

Mechanics Principle and Engineering Application of Split Layer and Bed Separation of Mining Overburden

<正>To control land surface subsidence caused the underground mineral exploitation and the catastrophic phenomena such as serious damage of buildings, waterbodies, cultivated lands, railways, bridges caused by land subsidence, bed separation grouting technology of overburden is put forward. To provide theoretical support for the technology, the characteristics and the mechanics mechanism of mining overburden from layer-split to formation of bed separation are studied. On the basis of elastic sheet board theory, calculation formula of rock sheet deflection is presented, and the mechanics criteria of the separation formation and the calculation formula of bed separation volume are set up. Finally, the applications and technics of bed separation grout technology of mining overburden to control land subsidence in china are introduced.