The integrated project AquaTerra of the EU sixth framework lays foundations for better understanding of river-sediment-soil-groundwater systems

The integrated project "AquaTerra" with the full title "integrated modeling of the river-sediment-soil-groundwater system; advanced tools for the management of catchment areas and river basins in the context of global change" is among the first environmental projects within the sixth Framework Program of the European Union. Commencing in June 2004, it brought together a multidisciplinary team of 45 partner organizations from 12 EU countries, Romania, Switzerland, Serbia and Montenegro. AquaTerra is an ambitious project with the primary objective of laying the foundations for a better understanding of the behavior of environmental pollutants and their fluxes in the soil-sediment-water system with respect to climate and land use changes. The project performs research as well as modeling on river-sediment-soil-groundwater systems through quantification of deposition, sorption and turnover rates and the development of numerical models to reveal fluxes and trends in soil and sediment functioning. Scales ranging from the laboratory to river basins are addressed with the potential to provide improved river basin management, enhanced soil and groundwater monitoring as well as the early identification and forecasting of impacts on water quantity and quality. Study areas are the catchments of the Ebro, Meuse, Elbe and Danube Rivers and the Brévilles Spring. Here we outline the general structure of the project and the activities conducted within eleven existing sub-projects of AquaTerra.     

Deposition of atmospheric ammonia to moorlands

Micrometeorological methods were applied to measure fluxes of atmospheric ammonia (NH3) to moorlands. Measurements were made in a wide variety of surface conditions and included both Calluna vulgaris (L.) Hull and Eriophorum vaginatum L. dominated sites. NH3 was found to deposit rapidly to all the sites investigated, providing large deposition velocities (Vd, typically 10-40 mm s(-1)) and usually minimal surface resistances (rc). A small number of measurements were made in frozen conditions and suggest a possible exception to this pattern with mean rc of 50-200 s m(-1). The effect of vegetation drying was also investigated and a possible increase in rc observed, though this was small (< 10 s m(-1)). The results are interpreted in terms of the processes controlling exchange; it is shown that NH3 deposition is predominantly to the leaf surfaces and that the net NH3 compensation point approaches zero. Annual estimates show that dry deposition of NH3 is a major source of atmospheric nitrogen to moorland ecosystems. For two typical UK sites subject to background air concentrations, NH3 dry deposition is of similar magnitude to equivalent NH4+ inputs in wet deposition. In the vicinity of emission sources, NH3 dry deposition is expected to dominate inputs of atmospheric nitrogen.     

The city as a refuge for insect pollinators

Research on urban insect pollinators is changing views on the biological value and ecological importance of cities. The abundance and diversity of native bee species in urban landscapes that are absent in nearby rural lands evidence the biological value and ecological importance of cities and have implications for biodiversity conservation. Lagging behind this revised image of the city are urban conservation programs that historically have invested in education and outreach rather than programs designed to achieve high‐priority species conservation results. We synthesized research on urban bee species diversity and abundance to determine how urban conservation could be repositioned to better align with new views on the ecological importance of urban landscapes. Due to insect pollinators’ relatively small functional requirements—habitat range, life cycle, and nesting behavior—relative to larger mammals, we argue that pollinators put high‐priority and high‐impact urban conservation within reach. In a rapidly urbanizing world, transforming how environmental managers view the city can improve citizen engagement and contribute to the development of more sustainable urbanization.     

Acetone and 2‐butanone creation associated with biological and chemical remediation of environmental contamination

Remediating environmental contamination by either biological or chemical methods typically results in the generation of temporary chemical intermediates as part of the process. These intermediate compounds may be related to either contaminant degradation pathways or reactions generated from the amendment itself. This article summarizes previously researched pathways and representative case studies discussing the authors' experience in generating relatively high concentrations of acetone and 2‐butanone (also referred to as methyl ethyl ketone [MEK]) during both biological and chemical treatments. Experience shows that even relatively high concentrations of acetone and MEK intermediates are quickly attenuated and prove not to be a hazard outside of the treatment area. © 2011 Wiley Periodicals, Inc.     

Future climate scenarios and rainfall--runoff modelling in the Upper Gallego catchment (Spain)

Global climate change may have large impacts on water supplies, drought or flood frequencies and magnitudes in local and regional hydrologic systems. Water authorities therefore rely on computer models for quantitative impact prediction. In this study we present kernel-based learning machine river flow models for the Upper Gallego catchment of the Ebro basin. Different learning machines were calibrated using daily gauge data. The models posed two major challenges: (1) estimation of the rainfall-runoff transfer function from the available time series is complicated by anthropogenic regulation and mountainous terrain and (2) the river flow model is weak when only climate data are used, but additional antecedent flow data seemed to lead to delayed peak flow estimation. These types of models, together with the presented downscaled climate scenarios, can be used for climate change impact assessment in the Gallego, which is important for the future management of the system.     

Influence of environmental factors on selenium flux in two marine invertebrates

The influence of certain environmental factors on the flux of selenium through marine biota has been studied, using Mytilus galloprovincialis and Lysmata seticaudata as test organisms of commercial interest. Over a selenium concentration range in sea water spanning 3 orders of magnitude, bioaccumulation of selenium by mussels was strongly dependent upon the ambient selenium concentration in sea water. Mussels accumulated Se (+4) to a much greater extent than Se (+6) and bioaccumulation was dependent upon temperature and mussel size. The presence of varying amounts of mercury did not significantly alter selenium uptake kinetics in mussels. Shrimp accumulated selenium to a lesser degree than mussels, the difference in concentration factors being due to the large amount of sorbed isotope lost with shrimp molts. Once incorporated, selenium was lost more rapidly from shrimp than from mussels. Temperature influenced selenium loss from mussels but did not alter the elimination rate in shrimp. Neither the chemical form of selenium nor mercury concentration in the organism affected loss of selenium from mussels. Elimination of selenium from shrimp was dependent upon the route of uptake; more rapid loss was noted from individuals which had absorbed the isotope directly from water than from those which had accumulated selenium via the food chain. In general, long-term selenium turnover rates were quite similar for both species; biological half-times ranged from 58 to 60 days for shrimp and 63 to 81 days for mussels. In the case of mussels, turnover rates measured in animals maintained in the laboratory differed somewhat from those determined from individuals held in field enclosures. Observed variations in flux rate may have been due to differences in food availability in the two experimental systems.Based on a communication given at the International Symposium on Interaction Between Water and Living Matter, Odessa, USSR, 6–10 October, 1975.     

Assimilation,inter-organ transfer and excretion of americium in two teleost fish

Radiotracer experiments were performed (February–April, 1982) to study the assimilation and metabolism of the transuranium nuclide americium-241 in the marine teleosts Serranus scriba (Linnaeus, 1758) and Scorpaena notata Rafinesque, 1810, caught off the Monaco coast. Fish fed with ²⁴¹Am-labelled food showed that assimilation of this radionuclide takes place through the gastrointestinal walls and that the small fraction accumulated is incorporated mainly in the skin, muscle and skeleton. Gut-transfer coefficients were similar in both species and averaged 0.7% (range 0.1 to 1.7%) of the ingested activity. The calculated biological half-lives for loss of the absorbed fraction ranged between 49 and 61 d for Serranus scriba and 12 and 117 d for Scorpaena notata. Results from an intramuscular injection experiment indicated that ²⁴¹Am was retained mainly in the liver, skin and skeleton; the fraction accumulated by muscle was very low. Liver displayed a relatively short biological half-time for ²⁴¹Am loss of roughly 24 d. Routes of ²⁴¹Am excretion from the teleosts appear to be through the kidneys, gills and feces with bile serving as a possible excretion route from the liver. From the limited amount of published information available for comparison, experimental evidence is presented which suggests that ²⁴¹Am taken up via the food chain is more biologically available to marine fish than is plutonium.     

Cadmium accumulation and toxicity in the kidney of the bay scallop Argopecten irradians

Specimes of bay scallops, Argopecten irradians, collected from shallow-water eel-grass beds near Beaufort, North Carolina (USA) in September 1979, were exposed to 0.7 ppm cadmium in flowing seawater for 5 d. This exposure resulted in a massive extrusion of the calcified concretions of most of the kidney epithelial cells, although marked morphological damage consisting of cytoplasmc degeneration was apparent in only a few focal areas of the kidney. In addition, unique cytoplasmic membrane-bound bodies were observed in epithelial cells of cadmium-treated but not control scallop kidneys. In some cells, these bodies appeared to fuse with the main concretion vacuole. Kidneys of cadmium-treated scallops accumulated cadmium to 200 ppm on a wet wt basis; of this 60% was associated with concretions (2 000 ppm dry wt) and 38% with the membranous pellet obtained after ultracentrifugation at 105 000 g for 1 h. Approximately 2% of total kidney cadmium was associated with the cytosolic fractions but, unlike zinc or manganese, which were bound to either high or low molecular weight species, a large component of the cadmium in this fraction was bound to a protein peak of approximately 21 000 daltons. Results of this study indicate that kidney concretions of A. irradians play a major role in the control of renal cadmium accumulation and excretion and hence the toxicity of cadmium to this organism.     

Equilibrium nonaqueous phase liquid pool geometry in coarse soils with discrete textural interfaces

This paper presents a model for the geometry of nonaqueous phase liquid (NAPL) pools and mounds in homogeneous soils and soils with discrete textural interfaces. It is shown that the concepts of capillary pressure-saturation curve hysteresis and entry pressures are integral to the complete conceptualization of pool and mound geometry. Unless hysteresis is included in the analysis, light NAPL (LNAPL) in homogeneous soils cannot exist in pools at all, and dense NAPL (DNAPL) will not mound on horizontal textural interfaces unless lateral confining boundaries are present. The proposed model also implies that remobilization of DNAPL pools will occur at lower hydraulic gradients than those predicted with previous models. Comparing predicted and experimental DNAPL and LNAPL pool thicknesses and the location of an LNAPL lens with respect to the top of the capillary fringe validate the model.     

Practical considerations for addressing uncertainties in monitoring bulk deposition

The assessment of the deposition of both wet (rain and cloud) and dry sedimenting particles is a prerequisite for estimating element fluxes in ecosystem research. Many nations and institutions operate deposition networks using different types of sampler. However, these samplers have rarely been characterized with respect to their sink properties. Major errors in assessing bulk deposition can result from poor sampling properties and defective sampling strategies. Relevant properties are: sampler geometry and material, in particular the shape of the rim; sink properties for gases and aerosols; and microbial transformations of the collected samples. An adequate number of replicates allows the identification of samples which are contaminated, in particular by bird droppings. The paper discusses physical and chemical properties of the samplers themselves. The dependence of measurement accuracy on the number of replicates and the sampling area exposed is discussed. Recommendations are given for sampling strategies, and for making corrections and substitution of missing data.