Evaluation of a Coulometric Procedure For the Detection of Strong and Weak Acid Components in Rainwater

A rapid coulometric procedure is described for the determination of non-volatile strong and non-volatile and volatile weak acids in rain samples. A constant current with known amperage is passed into a measured volume of the sample, with and without volatiles, and the changes in the electromotive force monitored with a potentiometer. Molarities of the different acids are calculated by plotting the function of the electromotive force against time in seconds according to Gran’s theory. The method is useful at acid concentrations of 10^-6 to 10^-4 M.     

Antibacterial activity of soil-bound antibiotics

There is some concern that antibiotic residues in land-applied manure may promote the emergence of antibiotic resistant bacteria in the environment. The goal of this study was to determine whether or not soil bound antibiotics are still active against bacteria. The procedure involved sorbing various amounts of tetracycline or tylosin on two different textured soils (Webster clay loam [fine-loamy, mixed, superactive, mesic Typic Endoaquolls] and Hubbard loamy sand [sandy, mixed, frigid Entic Hapludolls]), incubating these soils with three different bacterial cultures (an antibiotic resistant strain of Salmonella sp. [Salmonella(R)], an antibiotic sensitive strain of Salmonella sp. [Salmonella(S)], and Escherichia coli ATCC 25922), and then enumerating the number of colony forming units relative to the control. Incubation was done under both static and dynamic conditions. Soil-adsorbed antibiotics were found to retain their antimicrobial properties since both antibiotics inhibited the growth of all three bacterial species. Averaged over all other factors, soil adsorbed antimicrobial activity was higher for Hubbard loamy sand than Webster clay loam, most likely due to higher affinity (higher clay content) of the Webster soil for antibiotics. Similarly, there was a greater decline in bacterial growth with tetracycline than tylsoin, likely due to greater amounts of soil-adsorbed tetracycline and also due to lower minimum inhibitory concentration of most bacteria for tetracycline than tylosin. The antimicrobial effect of tetracycline was also greater under dynamic than static growth conditions, possibly because agitation under dynamic growth conditions helped increase tetracycline desorption and/or increase contact between soil adsorbed tetracycline and bacteria. We conclude that even though antibiotics are tightly adsorbed by clay particles, they are still biologically active and may influence the selection of antibiotic resistant bacteria in the terrestrial environment.     

An integrative analysis of the role of atmospheric deposition and land management practices on nitrogen in the US agricultural sector

Additions of anthropogenic nitrogen (N) compounds constitute one of the major classes of air pollutants of significance to human health and the environment. Reliance on wet deposition measurements alone can lead to considerable underestimates (by 40-60%) of the total (wet + dry) atmospheric N deposition. In addition, wet deposition of N are about 20% of the levels that are lost due to volatilization (primarily ammonia). Nevertheless, in the agricultural sectors of the Mississippi River basins, farm management practices, and recycling of N within cropping systems clearly outweigh the contributions of atmospheric deposition. As opposed to native vegetation and forests, there are no records of the negative effects of atmospheric N deposition on crop yield. Similarly, field studies on the interactions of atmospheric N compounds with the incidence and spread of pathogens does not permit any generalizations. Nitrogen applied as fertilizer affects disease probably more by its effect on the plant growth than by its effects on pathogens. In contrast, atmospheric nitrogen dioxide appears to be a stimulant of aphid performance. Under conditions of heavy weed infestation, N fertilization stimulates weed growth and competitiveness, rather than crop yield.     

Forest-based biomass supply potential and economics for the pellet production in Nepal

In the current study, the potential of forest-based biomass supply for the pellet production in Nepal is investigated. This study showed that about 2.76 million tonnes (Mt) biomass in the form of pellets are potentially available from forest-based biomass. Considering a processing capacity of 6 tonnes (t)/hr of a pellet plant, the production cost of the pellets was calculated to be $43.53/t. Pellets are generally used as fuel to produce thermal energy in industries, which helps to save the economy and the environment of the country.     

Studies on process optimization of biodiesel production from waste cooking and palm oil

This work investigated the optimisation of biodiesel production from waste cooking oil (WCO) and palm oil using a two-step transesterification process for WCO and base catalysed transesterification for palm oil. Transesterification reactions were carried out to investigate the effects of prepared catalyst CaO, methanol/WCO and methanol/palm oil ratio and temperature on the yield of biodiesel. A series of experiments were conducted to determine the best conditions for biodiesel production, using methanol/oil ratio between 4:1 and 11:1 and contact time varying between 2 and 4 h. Biodiesel yield of around 90 and 70% was obtained for palm and waste cooking oil at the methanol/oil ratios of 6:1 and 8:1 at temperature of 60 °C for reaction time of 4 h using prepared CaO as catalyst. The physicochemical properties of palm and WCO biodiesel were carried out using standard methods, while the fatty acid profile was determined using gas chromatography. The investigation concludes that biodiesel obtained from palm and waste cooking oil was within the specified limit.     

A Technical Amplification of NAPAP’s Findings

In September 1987, NAPAP released a 4-volume, 925 page interim report that summarized the effects of acidic precipitation on crops, forests, aquatic ecosystems, visibility, and human health. Following the release of the report, APCA coordinated an international conference to provide a forum for the technical amplification of the conclusions reached in NAPAP's report. Scientists from the United States and Canada were invited to participate in the conference. The focus of the meeting was concerned only with the technical aspects of the NAPAP report. At the conference, there were important research concepts presented that may require further attention before definitive, bottom line statements can be made concerning the effects of acid precipitation on the environment. The purpose of this paper is to summarize the key technical points made at the conference and provide NAPAP with additional scientific inputs as it begins to prepare for its 1990 Final Assessment Report.     

Important Considerations for Establishing a Secondary Ozone Standard to Protect Vegetation

Air quality standards are established to prevent or minimize the risk of adverse effects from air pollution to human health, vegetation, and materials. In order to develop standards which provide an adequate measure of protection to vegetation, it is necessary to define, in as precise terms as possible, the relationship between ambient air quality and the potential for adverse effects on vegetation. Based on recent evidence published in the literature, as well as retrospective studies using data from the National Crop Loss Assessment Network (NCLAN), cumulative indices can be used to describe exposures of ozone for predicting agricultural crop effects. However, the mathematical form of the standard that may be proposed to protect crops does not necessarily have to be of the same form as that used in the statistical or process oriented mathematical models that relate ambient ozone exposures with vegetation effects. This paper discusses the limitations associated with applying a simple statistic that may take the place of a more biologically meaningful exposure parameter. While the NCLAN data have been helpful in identifying indices that may be appropriate for establishing exposure-response relationships, the limitations associated with the NCLAN protocol need to be considered when attempting to apply these relationships in the establishment of a secondary national ambient air quality standard. The Weibull model derived from NCLAN experiments must demonstrate its generality and universal applicability. Furthermore, its predictive power must be tested using independent sets of field data.     

Uncertainties in the current knowledge of some atmospheric trace gases associated with U.S. agriculture: a review

Approximately 80 different crop species are grown in the United States in widely differing geographic areas, climatic and edaphic conditions, and management practices. Although the majority of cultivated acreage in the United States is planted with only about 10 primary crops, uncertainties associated with trace gas emissions arise from: (1) limited data availability, (2) inaccurate estimates because of large temporal and spatial variability in trace gas composition and magnitude of trace gas emissions from agricultural activities, (3) differing characteristics of pollutant emissions from highly dispersed animal feed-lots, and (4) limited understanding of the emissions of semi-volatile organic compounds (SVOCs) associated with agriculture. Although emission issues are of concern, so also is atmospheric deposition to cropping systems, including wet and dry nitrogen, minerals, and organic compounds. These can have feedback effects on trace gas emissions. Overall, the many gaps in our understanding of these aspects of agricultural systems deserve serious attention.     

Background culturable bacteria aerosol in two large public buildings using HVAC filters as long term, passive, high-volume air samplers

Background culturable bacteria aerosols were collected and identified in two large public buildings located in Minneapolis, Minnesota and Seattle, Washington over a period of 5 months and 3 months, respectively. The installed particulate air filters in the ventilation systems were used as the aerosol sampling devices at each location. Both pre and final filters were collected from four air handing units at each site to determine the influence of location within the building, time of year, geographical location and difference between indoor and outdoor air. Sections of each loaded filter were eluted with 10 ml of phosphate buffered saline (PBS). The resulting solutions were cultured on blood agar plates and incubated for 24 h at 36 degrees C. Various types of growth media were then used for subculturing, followed by categorization using a BioLog MicroStation (Biolog, Hayward, CA, USA) and manual observation. Environmental parameters were gathered near each filter by the embedded on-site environmental monitoring systems to determine the effect of temperature, humidity and air flow. Thirty nine different species of bacteria were identified, 17 found only in Minneapolis and 5 only in Seattle. The hardy spore-forming genus Bacillus was the most commonly identified and showed the highest concentrations. A significant decrease in the number of species and their concentration occurred in the Minneapolis air handling unit supplying 100% outdoor air in winter, however no significant correlations between bacteria concentration and environmental parameters were found.