Combinatorial bio/chemical analysis of dioxin and dioxin-like compounds in waste recycling, feed/food, humans/wildlife and the environment.

The present review describes international activities using bioassays/biomarkers in combination with chemical analysis to measure the effects of dioxin and dioxin-like compounds (DLCs) in the environment. The above authors reviewed already the state-of-art bioanalytical detection methods (BDMs) for dioxins and DLCs [Environ Int (2001)]. The aim of this study will be to review applications of these bioassays/biomarkers to evaluate potential dioxins and DLCs. The present literature study lists relative potencies (REPs) of polyhalogenated dibenzo-p-dioxins and -furans (PXDD/Fs; X = Cl, Br, F), their thio analogues polychlorinated dibenzothiophenes (PCDTs) and thianthrens (PCTAs), polyhalogenated biphenyls (PXBs), polychlorinated naphthalenes (PCNs) and other Ah receptor agonists measured by several biodetectors (Tier 3 screening). The authors will discuss some examples of the applications of some of these biodetectors in biomonitoring programmes and recently occurred dioxin crisis in feed/food. The diagnosis of the biopotency of these pollutants in technical processes like thermally treated waste, waste water treatment, landfill leachate treatment, commercial PCB-mixtures, the release into the environment (soil, air and water) and the final intake into wildlife and humans will be reviewed.     

Leaching of brominated flame retardants in leachate from landfills in Japan

Leachate samples were taken from seven different landfills and concentrations of brominated flame retardants (BFRs), i.e. polybrominated diphenyl ethers (PBDEs) and tetrabromobisphenol A (TBBPA), were quantified. Leaching characteristics of BFRs, especially factors affecting leachability, were clarified to obtain basic information regarding the release of BFRs into the environment. The results obtained for observed levels of the sum of PBDE-47, -99 and -100 were n.d.--4000 pg/l for the raw leachate and n.d. for the treated one, respectively, and those of TBBPA were n.d.--620,000 pg/l for the raw leachate and n.d.--11,000 pg/l for the treated one, respectively. Three sites that not only had crushed material from bulk wastes such as waste electric and electronic equipment, but also were under operation or within a year since closure, indicated a higher concentration of BFRs than the other sites. In particular extremely high concentration of PBDEs was observed at a site with a large amount of organics. Considering the leaching characteristics of BFRs, there exists the possibility that leachability of PBDEs is influenced by the presence of dissolved humic matter (DHM) in the leachate. The high removal efficiency for BFRs in the leachate treatment process was also confirmed.     

Estrogenic and dioxin-like potency in each step of a controlled landfill leachate treatment plant in Japan

The estrogenic activity (by E-screen bioassay), the concentrations of PCBs, PCDDs/PCDFs (and their resulting toxicity equivalents, TEQ) and several endocrine disrupting chemicals (EDCs: e.g., bisphenol A, nonylphenol, Butyl benzylpthalate (BBP), di-n-butylphthalate (DBP), 17alpha-ethynyl-estradiol or 4-octylphenol) have been analyzed from leachates of each step (before treatment, after biodegradation/sedimentation and after charcoal treatment) of a controlled landfill leachate treatment plant. The comparison of the effluent of the examined landfill leachate treatment plant with water from a nearby river in this study indicated no additional dioxin-like (e.g., TEQ: 0.027 compared to 1.01 pg TEQ/l; PCBs: 1.2 compared to 3.9 ng/l) or estrogenic impact (2.8 compared to 3.5 ng estradiol equivalents EE/l; analyzed by E-screen bioassay) from the leachate treatment plant into the surrounding water environment. The impact of dioxin-like compounds from uncleaned leachates into the final cleaned effluents could be sufficiently reduced by the leachate treatment plant for PCDDs (75%), PCDFs (62%), dioxin-like PCBs (97%), and the sum of TEQ (78%). The leachate treatment plant also achieved a reduction of the estrogenic activity as determined by E-screen (from 4.8 to 2.8 ng EE/l = 42%), by GC/MS for bisphenol A (>96% and nonylphenol (>98%) or by ELISA for estradiol (>80%). Additionally, for the validation of the E-screen, five known endocrine disrupting chemicals (EDCs: bisphenol A, BBP, DBP, 17 alpha-ethynyl-estradiol, 4-octylphenol) were analyzed. The EC50 values and estradiol equivalents factors (EEFs) for the five EDCs determined in this study were comparable to previously published data. The combined biological and chemical trace analysis data have provided valuable information on the relative contribution of natural, synthetic, and non-steroidal anthropogenic chemicals to the estrogenic and dioxin-like activity in leachates from a wastewater treatment plant, and water from a nearby river.     

Environmental impact assessment of sprayed-on asbestos in buildings

This study evaluated the environmental impacts of sprayed-on asbestos, which had been used as insulation material in buildings, from multiple perspectives, mainly at the disposal stage. The health risks from asbestos emission and energy consumption were estimated. Two disposal scenarios were assumed for the asbestos: melting for reduced-risk disposal and ordinary packaging/landfilling. We estimated the asbestos emission and health risk in the case of packaging/landfilling, assuming uncontrolled management of the landfill site. A difficulty with introducing health-risk concepts into life cycle assessment (LCA) is the pulse–flux problem, which is discussed in the light of these estimations. In order to solve this problem, we proposed a method using a conversion factor representing exposure-dose/emission, and showed that emission could be converted into health risk. We also estimated the energy consumption for melting asbestos in the disposal stage, which can decrease the health risk. If we consider the energy consumption for the life cycle of asbestos, only a little energy is required for melting, compared with the large amount of energy saved in the use stage owing to the insulating effect of the asbestos. The trade-off relationship between health risk and energy consumption for the disposal scenarios indicated the need for weighting methods to handle trade-offs such as this. Received: July 2, 1998 / Accepted: December 20, 1999     

Evaluation of the water quality of the Hakata River based on diatoms

We investigated the epilithic diatom assemblage of samples collected from three sites of the Hakata River, Fukuoka, Japan, on November 26, 2008. Each taxon was photographed and identified. The 1747 diatom frustules collected were classified into 33 taxa belonging to 17 genera. Nitzschia fonticola was abundant at all sites. The DAIpo (the diatom assemblage index to organic water pollution) values for sites 1, 2, and 3 were 50.2, 44.1 and 48.0, respectively, indicating that the water quality of the Hakata River was at β-mesosaprobic level.     

Poor correlation between the removal or deposition of pollen grains and frequency of pollinator contact with sex organs

The Science of Nature - Pollinators deposit pollen grains on stigmas and remove pollen grains from anthers. The mechanics of these transfers can now be quantified with the use of high-speed video....     

Consumer perspectives on household hazardous waste management in Japan

We give an overview of the management systems of household hazardous waste (HHW) in Japan and discuss the management systems and their risks. To get basic information, we conducted a survey of consumers to discover their behavior and awareness of HHW items throughout the entire life cycle, which is made up of the purchase, use, and disposal of a product. The results showed that many people hold end-of-life batteries, fluorescent lamps, empty spray cans, and others in their houses after use. Also, the results showed that a lot of such waste items were discarded in waste streams different from those stipulated by local governments. In particular, many people do not remove NiCd batteries inside products such as shavers or cordless phones before discarding. On the other hand, people’s knowledge of and concern regarding the risks, collection, and recycling of HHW were high. When information about the risks was specifically presented in the questionnaire, people tended to show a more positive intention to participate in a collection and recycling system compared to those who were not presented with such information. Our studies on NiCd batteries and fluorescent lamps showed that it is important to collect and recycle HHW to control the domestic and international flows of cadmium and mercury.     

Hydrolysis of <Emphasis Type="Italic">Sasa senanensis</Emphasis> culm with dilute sulfuric acid for production of a fermentable substrate

To prepare a substrate for microbial conversion of xylose into xylitol, the culm of Sasa senanensis was hydrolyzed with dilute sulfuric acid. When the reaction temperature was fixed at 121°C, an optimum yield of xylose was obtained by treatment with 2% sulfuric acid for 1 h. An increase in the sulfuric acid concentration or a prolonged reaction time resulted in a decrease in the xylose yield. A fermentable substrate with a relatively high xylose concentration (36.7 g l⁻¹) was obtained by hydrolysis with 2% sulfuric acid with a liquid-to-solid ratio of 5 g g⁻¹. During hydrolysis at elevated temperatures, certain undesired byproducts were also generated, such as degradation products of solubilized sugars and lignin, which are potential inhibitors of microbial metabolism. These compounds were, however, successfully removed from the hydrolysate by treatment with activated char.     

A simple inexpensive gas phase chemiluminescence analyzer for measuring trace levels of arsenic in drinking water

An inexpensive sensitive gas-phase chemiluminescence (GPCL) based analyzer for arsenic is described; this device utilizes manual fluid dispensing operations to reduce size, weight and cost. The analyzer in its present form has a limit of detection (LOD, S/N = 3) of 1.0 μg/L total inorganic As (peak heightbased, 3 mL sample). The system was used to measure low level arsenic in tap water samples from Texas and New Mexico and compared with results obtained by inductively coupled plasma-mass spectrometry (ICP-MS) as well as those from an automated GPCL analyzer. Good correlations were observed. Higher levels of As (50-500 μg/L, As(III), As(V) and mixtures thereof) were spiked into local tap water; the recoveries ranged from 95 ± 2% to 101 ± 1%. A single instrument weighs less than 3 kg, consumes <25 W in power, can be incorporated in a briefcase and constructed for <$US $1000. It is easily usable in the field.     

Isotope dilution analysis of polychlorinated biphenyls (PCBs) in transformer oil and global commercial PCB formulations by high resolution gas chromatography-high resolution mass spectrometry

Special polychlorinated biphenyls (PCBs) standards (native and isotope labeled) were analyzed by isotope dilution method using HRGC-HRMS. Multiple analysis of special PCBs standards by three different laboratories produced the relative response factors (RRFs) and relative standard deviations (RSDs %) was in the average of 0.979 and 3.86, respectively. Additionally, inter-laboratory analysis of various forms of transformer oil revealed the PCBs concentrations were in the following order; PCBs fortified transformer oil (940-1300 ng/g)>PCB polluted transformer oil (490-680 ng/g)>chemically degraded-transformer oil (480-490 ng/g) and PCBs free oil (ND-17 ng/g). Chemical degradation resulted in an order of magnitude decrease in the PCB concentrations. Specifically, higher chlorinated PCBs degraded into lower chlorinated PCBs. Also, composition of PCBs have been determined in PCB formulations from Japan (Kanechlor), Germany (Clophen), USA (Aroclor), Russia (Sovol) and Poland (Chlorofen). Major PCBs (24-PCB congeners) contributed 54-67%, 55-68%, 16-69%, 71% and 72% in Kanechlor, Clophen, Aroclor, Sovol and Chlorofen, respectively to total PCBs. The homologue pattern of Kanechlor, Aroclor and Clophen in technical fromulation was similar (e.g., Kanechlor-300 resembled to those of Clophen A-30 and Aroclor-1242). Furthermore, congener-specific distributions of major PCBs/dioxin-like PCBs and toxic equivalency quantities (TEQ) were calculated. Based on our tentative assumption calculations, cumulative production of five different technical PCB formulations, WHO-TEQ emission was estimated to be approximately 16.05 tons.