What are the implications of sea-level rise for a 1.5, 2 and 3 °C rise in global mean temperatures in the Ganges-Brahmaputra-Meghna and other vulnerable deltas?

Even if climate change mitigation is successful, sea levels will keep rising. With subsidence, relative sea-level rise represents a long-term threat to low-lying deltas. A large part of coastal Bangladesh was analysed using the Delta Dynamic Integrated Emulator Model to determine changes in flood depth, area and population affected given sea-level rise equivalent to global mean temperature rises of 1.5, 2.0 and 3.0 °C with respect to pre-industrial for three ensemble members of a modified A1B scenario. Annual climate variability today (with approximately 1.0 °C of warming) is potentially more important, in terms of coastal impacts, than an additional 0.5 °C warming. In coastal Bangladesh, the average depth of flooding in protected areas is projected to double to between 0.07 and 0.09 m when temperatures are projected at 3.0 °C compared with 1.5 °C. In unprotected areas, the depth of flooding is projected to increase by approximately 50% to 0.21–0.27 m, whilst the average area inundated increases 2.5 times (from 5 to 13% of the region) in the same temperature frame. The greatest area of land flooded is projected in the central and north-east regions. In contrast, lower flood depths, less land area flooded and fewer people are projected in the poldered west of the region. Over multi-centennial timescales, climate change mitigation and controlled sedimentation to maintain relative delta height are key to a delta’s survival. With slow rates of sea-level rise, adaptation remains possible, but further support is required. Monitoring of sea-level rise and subsidence in deltas is recommended, together with improved datasets of elevation.

     

Do national advisories serve local consumers: an assessment of mercury in economically important North Carolina fish

Consumption of marine fish provides both benefits (lean protein, omega-3 fatty acids and essential nutrients) and risks (main source of mercury (Hg) exposure for humans). Mercury is a potent neurotoxin and the source of more fish advisories nationwide than any other toxicant. Despite the widespread nature of Hg, it is unknown whether local Hg contamination reflects national and regional levels often used as bases to inform consumers of potential fish consumption risk. Thus, the objectives of our study were to examine Hg levels of six commonly consumed marine species harvested locally off the North Carolina coast and to compare our results to published regional (Monterey Bay Aquarium's Seafood Watch List) and national (Environmental Protection Agency, EPA, and Food and Drug Administration, FDA) Hg averages, action levels, and guidelines. We found significant differences in Hg concentrations among collected species, and we identified correlations between Hg concentration and fish length and trophic levels. Collected mahi mahi and triggerfish were below the EPA fish tissue action level (0.3ppm). Wahoo and grouper exceeded the EPA action level but were below the FDA action level (1.0ppm). King mackerel had the highest Hg concentration among targeted species, exceeding both EPA and FDA action levels. Further, our local results were not always consistent with calculated averages from EPA and FDA databases for the same species, and although many of our findings were consistent with Monterey Bay Aquarium's Seafood Watch List (southeast region), recommendations based on Hg levels would conflict with recommendations they provide based on sustainability. We find regional and national averages are not always reflective of local Hg contamination and suggest local data may be needed to accurately assess consumer risk.     

Measuring in-cabin school bus tailpipe and crankcase PM2.5: a new dual tracer method

Exposures of occupants in school buses to on-road vehicle emissions, including emissions from the bus itself, can be substantially greater than those in outdoor settings. A dual tracer method was developed and applied to two school buses in Seattle in 2005 to quantify in-cabin fine particulate matter (PM2.5) concentrations attributable to the buses' diesel engine tailpipe (DPMtp) and crankcase vent (PMck) emissions. The new method avoids the problem of differentiating bus emissions from chemically identical emissions of other vehicles by using a fuel-based organometallic iridium tracer for engine exhaust and by adding deuterated hexatriacontane to engine oil. Source testing results showed consistent PM:tracer ratios for the primary tracer for each type of emissions. Comparisons of the PM:tracer ratios indicated that there was a small amount of unburned lubricating oil emitted from the tailpipe; however, virtually no diesel fuel combustion products were found in the crankcase emissions. For the limited testing conducted here, although PMck emission rates (averages of 0.028 and 0.099 g/km for the two buses) were lower than those from the tailpipe (0.18 and 0.14 g/km), in-cabin PMck concentrations averaging 6.8 microg/m3 were higher than DPMtp (0.91 microg/m3 average). In-cabin DPMtp and PMck concentrations were significantly higher with bus windows closed (1.4 and 12 microg/m3, respectively) as compared with open (0.44 and 1.3 microg/m3, respectively). For comparison, average closed- and open-window in-cabin total PM2.5 concentrations were 26 and 12 microg/m3, respectively. Despite the relatively short in-cabin sampling times, very high sensitivities were achieved, with detection limits of 0.002 microg/m3 for DPMtp and 0.05 microg/m3 for PMck.     

Technological options for the management of biosolids

BACKGROUND, AIM, AND SCOPE: Large quantities of biosolids (sewage sludge), which are produced from municipal wastewater treatment, are ever-increasing because of the commissioning of new treatment plants and continuous upgrades of the existing facilities. A large proportion of biosolids are currently landfilled. With increasing pressure from regulators and the general public, landfilling of biosolids is being phased out in many countries because of potential secondary pollution caused by leachate and the emission of methane, a potent greenhouse gas. Biosolids contain nutrients and energy that can be used beneficially. Significant efforts have been made recently to develop new technologies to manage biosolids and make useful products from them. In this paper, we provide a review of the technologies in biosolids management. MATERIALS AND METHODS: A survey of literature was conducted. RESULTS: At present, the most common beneficial use of biosolids is agricultural land application because of inherent fertilizer values found in biosolids. Expansion of land application, however, may be limited in the future because of more stringent regulatory requirements and public concern about food chain contamination in some countries. Perceived as a green energy source, the combustion of biosolids has received renewed interest. Anaerobic digestion is generally a more effective method than incineration for energy recovery, and digested biosolids are suitable for further beneficial use through land application. Although conventional incineration systems for biosolid management generally consume more energy than they produce because of the high moisture content in the biosolids, it is expected that more combustion systems, either monocombustion or cocombustion, will be built to cope with the increasing quantity of biosolids. DISCUSSION: Under the increasingly popular low-carbon economy policy, biosolids may be recognized as a renewable fuel and be eligible for 'carbon credits'. Because ash can be used to manufacture construction materials, combustion can provide a complete management for biosolids. A number of advanced thermal conversion technologies (e.g., supercritical water oxidation process and pyrolysis) are under development for biosolids management with a goal to generate useful products, such as higher quality fuels and recovery of phosphorus. With an ever-increasing demand for renewable energy, growing bioenergy crops and forests using biosolids as a fertilizer and soil amendment can not only contribute to the low-carbon economy but also maximize the nutrient and carbon value of the biosolids. CONCLUSIONS: Land application of biosolids achieves a complete reuse of its nutrients and organic carbon at a relatively low cost. Therefore, land application should become a preferred management option where there is available land, the quality of biosolids meet regulatory requirements, and it is socially acceptable. Intensive energy cropping and forest production using biosolids can help us meet the ever-increasing demand for renewable energy, which can eliminate the contamination potential for food sources, a common social concern about land application of biosolids. In recent years, increasing numbers of national and local governments have adopted more stringent regulations toward biosolid management. Under such a political climate, biosolids producers will have to develop multireuse strategies for biosolids to avoid being caught because a single route management practice might be under pressure at a short notice. Conventional incineration systems for biosolids management generally consume more energy than they produce and, although by-products may be used in manufacturing, this process cannot be regarded as a beneficial use of biosolids. However, biosolids are likely to become a source of renewable energy and produce 'carbon credits' under the increasingly popular, low-carbon economy policy. RECOMMENDATIONS AND PERSPECTIVES: To manage biosolids in a sustainable manner, there is a need for further research in the following areas: achieving a higher degree of public understanding and acceptance for the beneficial use of biosolids, developing cost-efficient and effective thermal conversions for direct energy recovery from biosolids, advancing technology for phosphorus recovery, and selecting or breeding crops for efficient biofuel production.     

Integrating “livelihoods” into integrated water resources management: taking the integration paradigm to its logical next step for developing countries

This paper examines the weaknesses in the current understanding of Integrated Water Resources Management (IWRM) from the perspective of livelihoods. Empowering poor people, reducing poverty, improving livelihoods, and promoting economic growth ought to be the basic objectives of IWRM. But as currently understood and used, IWRM often tends to focus on second-generation issues such as cost recovery, reallocation of water to higher value uses, and environmental conservation. This paper argues that IWRM needs to be placed in the broader context of both modern Integrated Natural Resource Management (INRM) and the livelihoods approach, which together take a holistic and people-centered approach. The paper concludes with an alternative definition of IWRM as involving the promotion of human welfare, especially the reduction of poverty, encouragement of better livelihoods and balanced economic growth through effective democratic development and management of water and other natural resources in an integrated multilevel framework that is as equitable, sustainable, and transparent as possible, and conserves vital ecosystems. Transparent user-friendly information and models for assisting decision making are essential features of livelihood-oriented IWRM.     

Preliminary Studies on Converting Agricultural Waste into Biodegradable Plastics,Part I: Corn Distillers’ Dry Grain

Distillers dry grain (DDG) was derivatized either by carboxymethylation, glutaration, maleiation, phthallation, or succination in order to produce anionic materials suitable for complexation with soy protein isolate. Infrared spectroscopy confirmed that derivatization of DDG by all reagents was successful. Blending of derivatized anionic products with soy protein resulted in instant precipitation of gels. The gels were centrifuged, molded, and dried into solid pellets with tensile strengths as high as 1.67MPa, suggesting that these materials could be promising as biodegradable structural materials. Infrared spectroscopy suggested the possibility of complexes forming between soy protein isolate and each of the derivatized DDG samples.     

In situ soil treatments to reduce the phyto- and bioavailability of lead, zinc, and cadmium

A study was established near a former Zn and Pb smelter to test the ability of soil amendments to reduce the availability of Pb, Zn, and Cd in situ. Soil collected from the field was amended in the lab with P added as 1% P-H3PO4, biosolids compost added at 10% (referred to hereafter as "compost"), and a high-Fe by-product (referred to hereafter as "Fe") + P-triple superphosphate (TSP) (2.5% Fe + 1% P-TSP) and incubated under laboratory conditions at a constant soil pH. Changes in Pb bioavailability were measured with an in vitro test and a feeding study with weanling rats. Field-amended and incubated soils using these plus additional treatments were evaluated using the in vitro extraction and tall fescue (Festuca arundinacea Schreb. cv. Kentucky-31) metal concentration. Reductions were observed across all parameters but were not consistent. In the feeding study, the 1% P-H3PO4 and compost treatments resulted in a decrease of 26% in rat tissue Pb concentration compared with the control soil. The 2.5% Fe + 1% P-TSP showed a 39% decrease. The 1% P-H3PO4 treatment caused the greatest reduction in in vitro extractable Pb from field samples (pH 2.2) with a measured reduction of 66%, while the compost treatment had a 39% reduction and the 2.5% Fe + 1% P-TSP treatment a 50% reduction. The in vitro extraction (pH 1.5) run on field samples showed no reduction in the compost or Fe treatments. The 1% P-H3PO4 treatment was the most effective at reducing plant Pb, Zn, and Cd.     

The scale and cause of spatial heterogeneity in strength of temporal density dependence

The importance of density dependence in natural communities continues to spark much debate because it is fundamental to population regulation. We used temporal manipulations of density to explore potentially stabilizing density dependence in early survivorship among six local populations of a tropical damselfish (Dascyllus flavicaudus). Specifically, we tested the premise that spatial heterogeneity in the strength of temporal density dependence would reflect variation in density of predators, the agent of mortality. Our field manipulations revealed that mortality among successive cohorts of young fishes was density dependent at each reef, but that its strength varied by approximately 1.5 orders of magnitude. This spatial heterogeneity was well predicted by variation among the six reefs in the density of predatory fishes that consume juvenile damselfishes. Because density dependence arose from competition for enemy-free space within a shelter coral, the mortality consequence of the competition depended on the neighborhood density of predators. Thus, the scale of heterogeneity in the density dependence largely reflected attributes of the environment that shaped the local abundance of predators. These results have important implications for how ecologists explore regulatory processes in nature. Failure to account for spatial variation could frequently yield misleading conclusions regarding density dependence as a stabilizing process, obscure underlying mechanisms influencing its strength, and provide no insight into the spatial scale of the heterogeneity. Further, models of population dynamics will be improved when experimental approaches better estimate the magnitude and causes of variation in strength of stabilizing density dependence.     

Genetic structure of the southeastern United States loggerhead turtle nesting aggregation: evidence of additional structure within the peninsular Florida recovery unit

The southeastern United States supports one of two large loggerhead turtle (Caretta caretta) nesting aggregations worldwide and is therefore critical to global conservation and recovery efforts for the species. Previous studies have established the presence of four demographically distinct nesting populations (management units) corresponding to beaches from (1) North Carolina through northeastern Florida, (2) peninsular Florida, (3) the Dry Tortugas, and (4) northwest Florida. Temporal and geographic genetic structure of the nesting aggregation was examined utilizing partial mitochondrial control region haplotype frequencies from 834 samples collected over the 2002 through 2008 nesting seasons from 19 beaches as well as previously published haplotype data. Most rookeries did not exhibit interannual genetic variation. However, the interannual variation detected did significantly impact the interpretation of spatial genetic structure in northeastern Florida. Based on pairwise F _ST comparisons, exact tests of population differentiation, and analysis of molecular variance, the present study upholds the distinctiveness of the four currently recognized management units and further supports recognition of discrete central eastern, southern (southeastern and southwestern), and central western Florida management units. Further subdivision may be warranted, but more intensive genetic sampling is required. In addition, tools such as telemetry and mark-recapture are needed to complement genetic data and overcome limitations of genetic markers in resolving loggerhead turtle rookery connectivity in the southeastern USA.