Effects of atmospheric ammonia on vegetation--a review

Atmospheric ammonia does not only cause acute injuries at vegetation close to the source, but significantly contributes to large scale nitrogen eutrophication and acidification of ecosystems because the amount of sources is high and after conversion to ammonium it can reach remote areas by long-range atmospheric transport. Besides having acute toxic potential, NH(3) and NH(4)(+) (= NH(y)) may disturb vegetation by secondary metabolic changes due to increased NH(y) uptake and assimilation leading to higher susceptibility to abiotic (drought, frost) and biotic (pests) stress. Prevention of damage to natural and semi-natural ecosystems will only be achieved if NH(3) emissions are drastically reduced. In this paper, the current knowledge on NH(y) emission, deposition, and its effects on vegetation and ecosystems are reviewed. Critical levels and critical loads for nitrogen deposition are discussed.     

Exploiting plant metabolism for the phytoremediation of persistent herbicides

Weed control by herbicides has helped us to create the green revolution and to provide food for at least the majority of human beings living today. However, some herbicides remain in the environment and pose an ecological problem. The present review describes the properties and fate of four representative herbicides known to be presistent in ecosystems. Metabolic networks are depicted and it is concluded that removal of these compounds by the ecologically friendly technique of phytoremediation is possible. The largest problem is seen in the uptake of the compounds into suitable plants and the time needed for such an approach.     

Is metal extraction by Arabidopsis halleri related to exchangeable metal rates in soils amended with different metal-bearing solids?

Metals are associated to various constituents in polluted soils, and their availability is closely related to their chemical speciation. Studies on relations between metal extraction efficiency by hyperaccumulators and location of metals with respect to soil constituents are scarce. In this study. we investigate the relationship between metal extraction by Arabidopsis halleri and the exchangeable metals from substrates amended with various metal-bearing solids collected in the vicinity of a Zn smelter complex. These consisted of fresh and decomposing organic matter, the soil clay fraction, and two types of waste slags. ZnSO4 was also used as metal-bearing solid. Each was mixed with an unpolluted soil to produce two types of substrate, one moderately polluted and the other highly polluted. Total Zinc, Cd, Cu, and Pb were measured in substrates and in roots and shoots of A. halleri. Analysis of 0.01 M CaCl2 exchangeable metals in each substrate was performed before and after plant growth. The results showed different concentrations of exchangeable metals after plant growth, depending on the nature of the metal-bearing solids. In the ZnSO4 soil substrate, the proportion of exchangeable Zn decreased after plant growth, whilst it increased significantly on substrates amended with the two waste slags. For the other substrates, exchangeable Zn was not significantly different before and after plant growth. The same trend was observed for Cd. In the case of Cu, exchangeable rates increased in all substrates. The results were discussed according to the characteristics of the metal-bearing solids and to the metal-uptake strategy of A. halleri.     

Concentration of LAS and boron in the Itter. Comparison of measured data with results obtained by simulation with the GREAT-ER software

The GREAT-ER software was used to calculate linear alkylbenzene sulphonate [LAS] and boron concentrations in the Itter stream in North Rhine-Westfalia, Germany. The aim was to investigate the predictive strength of this newly developed tool and to compare its results to measured data. Substance-specific input data which were used in this scenario were partly generic (e.g. LAS and sodium perborate tetrahydrate consumption figures for Germany) and partly (site-)specific data (e.g. half-life time for LAS elimination). The comparison with the measured data reveals that the model predictions for LAS and boron are correct at least within a factor of two, only if generic German consumption data is applied. By using refined input data, the accuracy can be increased further.     

Persistent organochlorine pollutants in human serum of 50-65 years old women in the Flanders Environmental and Health Study (FLEHS). Part 2: Correlations among PCBs,PCDD/PCDFs and the use of predictive markers

In 1999, the FLEHS was set by the Flemish Ministry of Health, Belgium to assess pollutant concentrations and related health effect biomarkers in humans living in Flanders. Concentrations of selected organochlorine pesticides, polychlorinated biphenyls (PCB) and polychlorinated dibenzo-p-dioxins (PCDD) and furans (PCDF) were measured by gas chromatography-mass spectrometry and Chemical-Activated LUciferase gene eXpression (CALUX) bioassay in 47 serum pools of 200 women between 50 and 65 years living in two areas of Flanders. Correlation between TEQ values of different groups of compounds were computed in these pool results and it was found that total toxic equivalencies (TEQs) correlated well with the values of the groups of contributing compounds: mono-ortho PCBs (r = 0.77), non-ortho PCBs (r = 0.65) and PCDD/Fs (r = 0.88). The total TEQ was lower correlated to the CALUX-TEQ (r = 0.57). When calculating associations between those classes of compounds in the two studied regions separately, they were all higher correlated in the urban area compared to the more rural region. High correlation coefficients (r > 0.80) were also calculated between individual compounds and groups of compounds. It was suggested that in this studied background-exposed population, some compounds could be good predictors for a group: e.g. PCB 153 for indicator and total PCBs, PCB 118 for total PCB TEQ, PCB 156 for mono-ortho PCB-TEQs and total TEQ, 2,3,4,7,8-P5CDF for PCDD/F TEQs and total TEQs. This means that in pooled serum samples correlations between persistent organochlorine compounds are as strong as for individual POP measurements observed in earlier studies.     

Priority assessment of toxic substances in life cycle assessment. Part I: calculation of toxicity potentials for 181 substances with the nested multi-media fate, exposure and effects model USES-LCA

Toxicity potentials are standard values used in life cycle assessment (LCA) to enable a comparison of toxic impacts between substances. In most cases, toxicity potentials are calculated with multi-media fate models. Until now, unrealistic system settings were used for these calculations. The present paper outlines an improved model to calculate toxicity potentials: the global nested multi-media fate, exposure and effects model USES-LCA. It is based on the Uniform System for the Evaluation of Substances 2.0 (USES 2.0). USES-LCA was used to calculate for 181 substances toxicity potentials for the six impact categories freshwater aquatic ecotoxicity, marine aquatic ecotoxicity, freshwater sediment ecotoxicity, marine sediment ecotoxicity, terrestrial ecotoxicity and human toxicity, after initial emission to the compartments air, freshwater, seawater, industrial soil and agricultural soil, respectively. Differences of several orders of magnitude were found between the new toxicity potentials and those calculated previously.     

Daily mortality and air pollution in The Netherlands

We studied the association of daily mortality with short-term variations in the ambient concentrations of major gaseous pollutants and PM in the Netherlands. The magnitude of the association in the four major urban areas was compared with that in the remainder of the country. Daily cause-specific mortality counts, air quality, temperature, relative humidity, and influenza data were obtained from 1986 to 1994. The relationship between daily mortality and air pollution was modeled using Poisson regression analysis. We adjusted for potential confounding due to long-term and seasonal trends, influenza epidemics, ambient temperature and relative humidity, day of the week, and holidays, using generalized additive models. Influenza episodes were associated with increased mortality up to 3 weeks later. Daily mortality was significantly associated with the concentration of all air pollutants. An increase in the PM10 concentration by 100 micrograms/m3 was associated with a relative risk (RR) of 1.02 for total mortality. The largest RRs were found for pneumonia deaths. Ozone had the most consistent, independent association with mortality. Particulate air pollution (e.g., PM10, black smoke [BS]) was not more consistently associated with mortality than were the gaseous pollutants SO2 and NO2. Aerosol SO4(-2), NO3-, and BS were more consistently associated with total mortality than was PM10. The RRs for all pollutants were substantially larger in the summer months than in the winter months. The RR of total mortality for PM10 was 1.10 for the summer and 1.03 for the winter. There was no consistent difference between RRs in the four major urban areas and the more rural areas.     

Genetic engineering in the improvement of plants for phytoremediation of metal polluted soils

Metal concentrations in soils are locally quite high, and are still increasing due to many human activities, leading to elevated risk for health and the environment. Phytoremediation may offer a viable solution to this problem, and the approach is gaining increasing interest. Improvement of plants by genetic engineering, i.e. by modifying characteristics like metal uptake, transport and accumulation as well as metal tolerance, opens up new possibilities for phytoremediation. So far, only a few cases have been reported where one or more of these characteristics have been successfully altered; e.g. mercuric ion reduction causing improved resistance and phytoextraction, and metallothionein causing enhanced cadmium tolerance. These, together with other approaches and potentially promising genes for transformation of target plants are discussed.     

Cu accumulation in the earthworm Dendrobaena veneta in a heavy metal (Cu, Pb, Zn) contaminated site compared to Cu accumulation in laboratory experiments

Earthworms (Dendrobaena veneta) were exposed to heavy metal contaminated soil from a field site under both laboratory and field conditions. In the laboratory study, D. veneta were analysed for Cu after 2 weeks' exposure. The tissue Cu concentration (Cu(W)) increased proportionally with the total extractable soil Cu content (Cu(T)) in soils that contained less than 150 mg Cu kg(-1). In D. veneta exposed to soils containing more than Cu(T) = 150 mg kg(-1), however, we observed no further increase in Cu(W). In a 64-m(2) field plot at a contaminated site, 81 soil samples were taken and analysed for Cu, Pb, Zn and pH. In June 1994, 1000 D. veneta were homogeneously distributed in the plot and sampled after 1, 2 and 5 weeks to analyse for Cu. Additionally, 2000 D. veneta were introduced in September 1994 and sampled after 1, 2 and 4 weeks. At locations where earthworms were removed, the soil Cu content was estimated by disjunctive kriging. Cu concentration factors (ratio of Cu(W) to Cu(T)) in the field experiment were in excellent agreement with those of the laboratory experiment. This indicates that, with a sufficiently high sampling density, it may be feasible to predict earthworm Cu accumulation in the field using a concentration factor determined in the laboratory.