A basidiomycete isolated from the skeleton of<Emphasis Type="Italic"> Pocillopora damicornis</Emphasis> (Scleractinia) selectively stimulates short-term survival of coral skeletogenic cells

Endolithic fungi bore through the extracellular calcium carbonate skeleton of reef-building scleractinian corals, both healthy and dead, and effect net erosion of coral reefs. Potential fungal interactions with coral tissue were investigated using an in vitro approach suggested by earlier observations of skeletal repair cones at the site of fungal perforation in Porites sp. A fungal strain was isolated from the skeleton of a long-term culture of healthy, tissue-covered, Pocillopora damicornis Linnaeus colonies maintained in a recirculating system in Monaco. As coral soft tissue spontaneously dissociated in vitro, the skeleton became exposed and hyaline hyphae emerged radially from 15% of the total clipped branches. In this study, which was performed between January 2001 and March 2003, 35 skeleton–hypha explants were embedded in agar-based solid medium, yielding 60% hyphal growth. A fungal strain (F19-3-1) of the dominant (80%) morphology was isolated and propagated in agar-based solid medium. The strain was identified by 18S and 26S rDNA gene sequence analysis as a basidiomycete in the genus Cryptococcus. Co-cultures were used to provide experimental exposure of coral soft tissue to the fungus. The fungus extended the survival of coral cells by 2 days, selectively maintaining skeletogenic cell types. This effect may be interpreted as stimulation by the fungus of a short-term coral defense response.Communicated by J.P. Grassle, New Brunswick     

Rotational application of bioinsecticide with deltamethrin-An antilarval measure for the control of filarial vector, Culex quinquefasciatus (Culicidae: Diptera)

A laboratory investigation was undertaken to study the cyclic usage of field recommended doses of Bacillus thuringiensis israelensis (Bti), Bacillus sphaericus (Bsp) and combination of Bti and Bsp (half the recommended dose of each) with deltamethrin 2.8 EC to attain better control of mosquito larvae. To understand the susceptibility status of the Culex quinquefasciatus larvae in the field, early fourth instar field collected larvae were exposed to the above treatments of biopesticides and were monitored for their persistency till 50% mortality was obtained. The larvae those survived in each treatment were transferred to the concentration of deltamethrin that gave 50% mortality. Observations on larval mortality after the treatment with deltamethrin were recorded after 24 h. The results revealed that Bti excels Bsp, as it recorded 54% mortality only on 17th day after application. The other salient finding of this study is LC50 of deltamethrin is sufficient to follow the biopesticides application for an effective control of Culex larvae.     

Changes in the atmospheric deposition of minor and rare elements between 1975 and 2000 in south Sweden, as measured by moss analysis

Elements emitted to the atmosphere are partly exported to more remote areas and contribute to the regional and territorial deposition rates. This study is based on the principle that carpet-forming bryophytes (pleurocarpic mosses) absorb elements and particles from rain, melting snow and dry deposition. We compare the concentrations of 60 elements in carpets of the forest moss Pleurozium schreberi sampled in 1975 and 2000 within a sparsely inhabited area dominated by forest and bogland in south Sweden. As an average for all the 60 elements, the median concentration was 2.7 times higher in 1975 than in 2000. The greatest difference was measured for Pb, although In, Bi, Ge, V, Sn, As and Ag had more than 5 times higher concentrations in 1975 than in 2000. Somewhat lower 1975/2000 concentration ratios (3.0-3.8) were measured for U, Sb, Cd, W, Ga, Fe, Li, and Be. The rare-earth elements (Y, La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu), except Eu as well as Th, Ni, Al, Ti, Hf, Nb, and Zr, had concentration ratios around the average (2.5-2.8). Possible causes of these changes are discussed. We conclude that reductions in anthropogenic dust emissions during recent decades have decreased the atmospheric deposition over northern Europe of most elements in the periodical system, as previously reported for a limited number of transition and heavy metals. Changes in the deposition of soil dust would be of minor importance to the decreased deposition rates.     

Using Science to Assess Environmental Vulnerabilities

Beginning in 1995, the U.S. Environmental Protection Agency (U.S. EPA), Office of Research and Development has focused much of its ecological research in the Mid-Atlantic as part of the Mid-Atlantic Integrated Assessment (MAIA). The goal of MAIA is to improve the assessability of scientific information in environmental decision-making. Following the Environmental Monitoring and Assessment Program (EMAP) whose goal is to guide monitoring that effectively reflects current ecosystem condition and trends, MAIA's second, current, phase of research under the Regional Vulnerability Assessment (ReVA) program is designed to target risk management activities using available data and models. The papers presented here are from a conference held in May 2003 that presented results of research in this second phase of MAIA. The conference was organized into the following topics: 1. Assessing Current Impacts and Vulnerabilities 2. Forecasting Environmental Condition and Vulnerabilities 3. Developing Management Strategies to Optimize the Future, and 4. Assessing and Responding to Environmental Vulnerability.     

MTBE oxidation byproducts from the treatment of surface waters by ozonation and UV-ozonation

In recent years, there has been considerable concern over the release of methyl tert-butyl ether (MTBE), a gasoline additive, into the aquifers used as potable water sources. MTBE readily dissolves in water and has entered the environment via gasoline spills and leaking storage tanks. In this paper, we investigate ozonation and UV-ozonation for treatment of MTBE in contaminated drinking water sources. We report the test protocol and results of using solid-phase microextraction (SPME) to determine the level of MTBE and its oxidation byproducts in samples drawn from laboratory-scale ozone and UV-ozone reactors being evaluated at a US EPA research facility. Analysis of a prepared MTBE standard indicated a detection limit on the order of 0.1 microgl(-1) with a repeatability of +/-0.4%. Results show that the overall rate of removal of MTBE via UV-ozonation in a relatively turbid surface water (15 ntu) is twice that of ozonation alone. In addition, GC-MS analysis of decomposition products showed that tert-butyl formate (TBF), methyl acetate, butene, acetone, and acetaldehyde were produced by both processes. TBF and butene reach similar maximum yields from the two processes, but are more efficiently degraded by UV-ozonation treatment. This indicates that these treatment processes also degrade these byproducts. In contrast, the remaining byproducts (methyl acetate, acetone, and acetaldehyde) are formed at similar levels during treatment, but are not degraded once formed. These byproducts may be resistant to hydrogen abstraction by hydroxyl radical.     

Uncertainties and recommendations

An assessment of the impacts of changes in climate and UV-B radiation on Arctic terrestrial ecosystems, made within the Arctic Climate Impacts Assessment (ACIA), highlighted the profound implications of projected warming in particular for future ecosystem services, biodiversity and feedbacks to climate. However, although our current understanding of ecological processes and changes driven by climate and UV-B is strong in some geographical areas and in some disciplines, it is weak in others. Even though recently the strength of our predictions has increased dramatically with increased research effort in the Arctic and the introduction of new technologies, our current understanding is still constrained by various uncertainties. The assessment is based on a range of approaches that each have uncertainties, and on data sets that are often far from complete. Uncertainties arise from methodologies and conceptual frameworks, from unpredictable surprises, from lack of validation of models, and from the use of particular scenarios, rather than predictions, of future greenhouse gas emissions and climates. Recommendations to reduce the uncertainties are wide-ranging and relate to all disciplines within the assessment. However, a repeated theme is the critical importance of achieving an adequate spatial and long-term coverage of experiments, observations and monitoring of environmental changes and their impacts throughout the sparsely populated and remote region that is the Arctic.     

Characterization of aerosols from biomass burning--a case study from Mizoram (Northeast), India

Physical and optical properties of biomass burning aerosols in Northeastern region, India analyzed based on measurements made during February 2002. Large spatial extent of Northeastern Region moist tropical to moist sub-tropical forests in India have high frequency of burning in annual dry seasons. Characterization of resultant trace gases and aerosols from biomass burning is important for the atmospheric radiative process. Aerosol optical depth (AOD) observed to be high during burning period compared to pre- and post-burning days. Peak period of biomass burning is highly correlated with measured AOD and total columnar water vapor. Size distribution of aerosols showed bimodal size distribution during burning day and unimodal size distribution during pre- and post-burning days. Size distribution retrievals from biomass burning aerosols show dominance of accumulation mode particles. Weighted mean radius is high (0.22 microm) during burning period. Columnar content of aerosols observed to be high during burning period in addition to the drastic reduction of visibility. During the burning day Anderson sampler measurements showed dominance of accumulation mode particles. The diurnal averaged values of surface shortwave aerosol radiative forcing af biomass burning aerosols varies from -59 to -87 Wm(-2) on different days. Measured and modeled solar irradiances are also discussed in the paper.     

Development and validation of a method for analysis of "dioxin-like" PCBs in environmental samples from the steel industry

A method, previously used for determination of 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), has been modified for quantitative analysis of "dioxin-like" polychlorobiphenyls (PCBs) in environmental samples from the steel industry. The existing sample clean-up procedure, involving liquid chromatography on multi-layered silica and Florisil columns, has been extended to include a third chromatography stage on a basic alumina stationary phase. The additional clean-up stage is required for PCB analysis in order to eliminate interferences from relatively large concentrations of saturated cyclic and aliphatic hydrocarbons. Samples were analysed for WHO-12 congeners using high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) and standard solutions of the method US EPA 1668A. Replicate analysis of method blanks revealed background contamination for PCBs 118, 105 and 77, which are generally abundant in ambient air. These contaminants were taken into account using a subtraction method. The entire procedure was validated by replicate analysis (N = 3) of a certified reference sediment. The RSD for each WHO-12 congener was below 15%, 13C12-labelled PCB internal standard recoveries were in the range 70-95%. A waste dust sample collected in the electrostatic precipitator of a UK sinter plant was analysed for determination of PCDD/Fs and WHO-12 PCBs and exhibited a PCDD/F I-TEQ of 148.5 +/- 21.2 ngkg(-1) and a WHO-TEQ of 7.2 +/- 1.5 ngkg(-1). WHO-12 congeners contributed only 4.6% to the overall TEQ and PCB 126 was the major congener contributing to the WHO-TEQ (96%). The contribution to the overall TEQ of the waste dust sample was mainly attributed to PCDF followed by PCDD, which accounted for 86.6% and 8.7% to the overall TEQ, respectively.     

A new method for testing the sensitivity of active biomonitoring: an example of its application to a terrestrial moss

For the first time, the concepts of limit of detection and limit of quantification, commonly used in analytical chemistry, are applied to the field of active biomonitoring with terrestrial mosses, using the controls as blanks so that the limits indicate the error associated with the transplant technique. The application of these concepts to data corresponding to Hg concentrations in the surroundings of a chlor-alkali plant and a power plant, makes interpretation of the results easier by providing better spatial and temporal coherence. This procedure may allow improvement in the standardization of active biomonitoring techniques as it is applicable to all kinds of biomonitors. One disadvantage of the application of the limit of detection and limit of quantification is that they only take into account the alpha error, or risk of false positives, and do not take into account the beta error, or risk of false negatives.