The collection of PM10 for toxicological investigation: comparisons between different collecting devices

A positive correlation has been established between increased levels of airborne particulate pollution and adverse health effects, the toxicological mechanisms of which are poorly understood. For toxicologists to unambiguously determine thesemechanisms, truly representative samples of ambient PM₁₀ are required. This presents problems, as PM₁₀ collecting equipment commonly employed, such as the Tapered Element Oscillating Microbalance (TEOM®), heat the inflow toexclude moisture or use fibrous filters, resulting in a PM₁₀sample that may have undergone significant chemical change on thefilter surface or is contaminated by filter fibres. Other systems(i.e. Negretti and Partisol) can successfully collect PM₁₀ without chemical alteration or filter contamination. Comparativecollections from Port Talbot, S. Wales suggest that TEOMs and Negretti/Partisol systems collect different PM₁₀'s; the principle difference arising from the TEOM's heating chamber, which precipitates water-soluble ions and volatilises some organic components. This results in both the mass and compositionof the PM₁₀'s being altered. Particle size distributionsfor Negretti and Partisol collections highlighted differences mainly attributed to different flow rates. The results of thiswork demonstrate that simple correlations between PM₁₀ massand adverse health effects are problematic. Furthermore, elucidation of the complex fractionation and chemical changes indifferent collectors is necessary.     

Macroinvertebrate Regionalisation for use in the Management of Aquatic Ecosystems in Victoria, Australia

The development of a broader, more holistic approach to aquaticecosystem management has been called for in recent years. Physical and chemical objectives alone are no longer consideredsufficient for the protection of aquatic ecosystems and shouldbe supplemented with biological objectives. The ubiquitousand sedentary nature of macroinvertebrates, combined with theirmeasurable response to environmental conditions, favour their use as important indicators in environmental policies. To establish biological objectives, there is a need for a regionalframework to limit the variability between ecosystems. Past studies have demonstrated that an a posteriori regionalisationapproach may be more useful than an a priori approach in explaining single component (e.g. macroinvertebrates) patternsacross ecosystems. This is particularly important as aquaticresource management agencies often focus on one or twocomponents of the ecosystem to assess environmental health. This study uses an a posteriori method to delineate and describebiological regions based on edge and riffle macroinvertebrate data. The regionalisation will provide a framework for settingbiological objectives, based on the range of reference conditionsmeasured within each separate region. The objectives will includeregional checklists for taxa and biotic indices. Predictive modelling in the style of RIVPACS or AUSRIVAS will also be usedwithin each region to develop objectives, incorporating local, regional and systematic features as predictor variables.     

Multi-level screening of a proposed hazardous waste treatment and disposal facility site--a case study

A comprehensive environmental assessment (EA) is a pre-requisite before the site for developing a hazardous waste treatment and disposal facility (HWTDF) is selected. However, the resource limitations, especially for developing countries, often dictatethat the detailed EA be restricted to those sites, which are constraint free and have low hazard potentials. Thus, a preliminary screening exercise for assessing the suitability ofsite for developing the HWTDF needs to be carried out to avoid huge costs involved in detailed EA. While screening a HWTDF site,various factors such as present land use, ecologically sensitiveareas, geology and hydrogeology of the area, the quality and quantity of wastes, engineered safeguards, and the operationalprocedures that need to be adopted, are required to be addressed. In this paper, a multi-level screening criteria employing RemoteSensing, Constraint Mapping, Groundwater Pollution Potential Index (DRASTIC Index), and the Site Ranking was used to assess the suitability of a proposed site for the development of HWTDF.The study helped to identify various constraints at the proposedsite and their significance on the development of the HWTDF.     

Persistent chlorinated pesticides in fish and cattle fat and their implications for human serum concentrations from the Sene-Gambian region

The concentrations of organochlorine pesticides (OCPs) in fish, shrimps, cattle fat and human serum samples from the Sene-Gambian region were measured using validated analytical methodologies. The results obtained were compared with those of other existing African studies and with data from other developing countries. In fish samples, p,p'-dichlorodiphenyldichloroethylene (p,p'-DDE) and HCB were detected with a frequency of 100%, whereas p,p'-dichlorodiphenyltrichloroethane (p,p'-DDT) was detected in eight, heptachlorepoxide in six and endosulfansulfate in five of the nine fish samples. Relatively low concentrations of OCPs were found in cattle and shrimp fat samples. p,p'-DDE and alpha-hexachlorocyclohexane (alpha-HCH) were the most frequently identified. The sum of HCHs ranged from undetected to 13.3 ng g-1 fat, the sum of DDTs from 11.1 to 199.2 ng g-1 fat and the sum of endosulfans from not detected to 49.7 ng g-1 fat in fish and shrimps. In serum samples, alpha-HCH, p,p'-DDE, o,p'-DDT and p,p'-DDT were detected in all 16 pooled serum samples, whereas endosulfansulfate, methoxychlor, mirex, heptachlorepoxide and endrin were detected in 15 samples with most of the concentrations below 10 ng mL-1. The concentrations of OCPs in human serum were given on a serum lipid and whole serum volume basis. The implications for the human diet of these OCP concentrations in serum were investigated by means of biomagnification factors related to the log Kow values of the targeted compounds. The current use of HCH mixtures was suggested to explain the unusually high alpha-HCH concentration. The distribution pattern of these OCPs in humans was also discussed and compared with that in other studies.     

Should foliar cadmium concentrations be expressed on a dry weight or dry ash weight basis?

Foliar analysis is a valuable tool for evaluating the pollution status of forests. However, the use of foliar diagnosis in large-scale surveys is a complicated process owing to the high variability within the crown. The method used to express foliar concentrations has often been found to diminish the variability. The effect of the method used to express element concentrations on the spatial variability of cadmium (Cd) in the leaves of crack willow (Salix fragilis L.) was investigated by sampling the leaves of one willow at 292 locations in the crown, each sampling location having a volume of 0.027 m3 (0.3 m x 0.3 m x 0.3 m). Cadmium showed a distinct spatial trend in the crown of the tree. Concentrations as low as 2.4 mg kg(-1) dry weight (DW) or 23.1 mg kg(-1) dry ash weight (DAW) were obtained in the top of the crown, and 10.6 mg kg(-1) DW or 73.0 mg kg(-1) DAW in the bottom of the crown. The lower relative standard deviation and weaker correlation with the sampling height support the use of DAW in large-scale surveys especially. The lower variability of the DAW Cd concentration makes this variable less sensitive to fluctuations caused by differences in growing conditions and sampling methodology. However, the majority of publications in this field report metal concentrations on a DW basis. Therefore, the restrictions set on the use of results expressed on a DAW basis in large-scale surveys of foliar metal concentrations have to be offset against the advantages offered by a reduction of the variability in metal concentrations.     

Chromium speciation and fractionation in ground and surface waters in the vicinity of chromite ore processing residue disposal sites

Chromium concentrations of up to 91 mg l(-1) were found by ICP-OES for ground water from nine boreholes at four landfill sites in an area of S.E. Glasgow/S. Lanarkshire where high-lime chromite ore processing residue (COPR) from a local chemical works had been deposited from 1830 to 1968. Surface water concentrations of up to 6.7 mg l(-1) in a local tributary stream fell to 0.11 mg l(-1) in the River Clyde. Two independent techniques of complexation/colorimetry and speciated isotope dilution mass spectrometry (SIDMS) showed that Cr was predominantly (>90%) in hexavalent form (CrVI) as CrO4(2-), as anticipated at the high pH (7.5-12.5) of the sites. Some differences between the implied and directly determined concentrations of dissolved CrIII, however, appeared related to the total organic carbon (TOC) content. This was most significant for the ground water from one borehole that had the highest TOC concentration of 300 mg l(-1) and at which < 3% of Cr was in the form of CrVI. Subsequent ultrafiltration produced significant decreases in Cr concentration with decreasing size fractions, e.g. <0.45 microm, < 100 kDa, <30 kDa and < 1 kDa by the tangential-flow method. As this appeared related more to concentrations of humic substances than of TOC per se, horizontal bed gel electrophoresis of freeze-dried ultrafilter retentates was carried out to further characterise the CrIII-organic complex. This showed for the main Cr-containing fraction, 100 kDa-0.45 microm, that the Cr was associated with a dark brown band characteristic of organic (humic) matter. Comparison of gel electrophoresis and FTIR results for ultrafilter retentates of ground water from this borehole with those for a borehole at another site where CrVI predominated suggested the influence of carboxylate groups, both in reducing CrVI and in forming soluble CrIII-humic complexes. The implications of this for remediation strategies (especially those based on the addition of organic matter) designed to reduce highly mobile and carcinogenic Cr(VI)O4(2-) to the much less harmful CrIII as insoluble Cr(OH)3 are discussed.     

Long-Term Relationship between Phosphorus Inputs and Wetland Phosphorus Concentrations in a Northern Everglades Marsh

Assessments of long-term relationships between changes innutrient inputs and wetland nutrient concentrations can becomplicated by fluctuations in other environmental factors aswell as by problems typical of long-term monitoring data.Consequently, statistical analysisof these types of data sets requirescareful consideration of environmental covariates, potentialbiases in the monitoring design, and irregularities caused bychanges in field sampling protocols. We evaluated therelationship between anthropogenic phosphorus (P) inputs andwater-column total P (TP) concentrations in a northernEverglades marsh by statistically analyzing available datacollected from several sampling programs over the past 20 years(1978–1997). Canal inputs of agricultural runoff contributemost of the P to the marsh and have produced a zone ofenrichment within the marsh during the past few decades.Regression analyses showed that both canal and marsh TPconcentrations increased during the 1980s and then decreased inthe 1990s. However, the statistical relationship between canal Pinputs and marsh TP, while significant, generally was weakexcept for marsh locations adjacent to the canal. Strongerrelationships existed between marsh TP and hydrologic parameterssuch as marsh water depth, which is controlled by changes inweather patterns and marsh management. In particular, dryconditions during the 1980s may have contributed to observedincreases in marsh P concentrations and the movement of a P`front' further into the marsh. Higher rainfall and water depthsand agricultural best management programs initiated during the1990s have been associated with reduced P concentrations incanal waters entering the marsh. While it is anticipated thatthis reduction eventually will result in lower marsh TPconcentrations, this effect is not yet evident, possibly due tointernal loading of P from enriched marsh soils. Our findingsillustrate some of the environmental factors that can complicateattempts to develop empirical relationships between P inputs andwetland P concentrations and to use such relationships to forecast changesin marsh concentrations based on past monitoring data alone.     

Mulberry-silkworm food chain--a templet to assess heavy metal mobility in terrestrial ecosystems

Assessment of the food chain mobility of heavy metals inthe natural ecosystem receives more attention nowadays. Inthe present study, mulberry-silkworm food chain has beenfocused as a templet to assess the biomobility of heavymetals in soil-higher plant-insect hierarchy. Both in thecase of Cd and Cu treatments, higher mobility wasobserved in the level-1 (soil–root) followed by level-3(leaf–larva), level-4 (larvae–faecal) and level-2(root–leaf). Consequently, roots accumulated more amountsof Cd and Cu, with a limited transport to the leaves.Among the two metals (Cd and Cu) tested, in the plant,the transfer potential of Cd exceeds that of Cu. Whereasin the case of leaf–larval transfer, Cu precedes overCd. Accumulation of Cd and Cu in all the levels (1–4)tested showed a concentration dependent increase, except inthe level 4 (larva–faecal) of Cd treatment where adeclining trend was noticed.     

Monitoring atmospheric metal pollution: a review of the use of mosses as indicators

This article reviews the literatureon the use of mosses for monitoring atmospheric metalpollution. It discusses the nature of mosses, themechanisms for moss uptake of metals from the air andwet precipitation, the various forms in which mossesare used for this purpose, and cases in which mosseshave been used for monitoring local hot spots ofpollution, and regional patterns of metal pollution.Also highlighted are the questions of uptake of metalsfrom the substrates, interspecies differences, and acomparison of the effectiveness of mosses with otherindicator materials, among other issues.     

Laboratory and Field Assessment of Arsenic Testing Field Kits in Bangladesh and West Bengal, India

High concentrations of arsenic in ground waters in West Bengal and Bangladeshhave become a major cause for concern in recent years. Given the enormity and the severity of the problemof arsenic poisoning, a task of evaluating the commercially available arsenic detection field kits for their capabilities was undertaken. In the light of the findings, generic specificationswere recommended which could form the basis forindigenous manufacture of these kits in the arsenic affected countries. This article presents the results of the laboratory and fieldevaluation conducted in Bangladesh and West Bengalof five arsenic testing field kits. The salient features of the kits, their merits and limitationshave been brought out. Based on the criteria of kitdesign, quality of chemicals used, colourcomparator charts, detection range, time required for analysis, cost etc., a comparative ranking ofthe kits has been made to facilitate the choice of the kit to meet specific requirements.