Determining C/N ratios for typical organic wastes using biodegradable fractions

It is well established that an optimal aerobic and anaerobic microbial metabolism is achieved with a C/N ratio between 20 and 30. Most studies are currently based on chemically-measured carbon and nitrogen contents. However, some organic wastes can be composed of recalcitrant carbon fractions that are not bioavailable. To know the biodegradable C/N ratio, two different methods to determine the aerobic and anaerobic biodegradable organic carbon (BOC_AE and BOC_AN) are proposed and used to analyze a wide variety of different organic samples. In general, raw wastes and digested products have more amount of BOC_AE. On the contrast, the samples collected after an aerobic treatment have higher content of BOC_AN. In any case, all the BOC fractions are lower than the total organic carbon (TOC). Therefore, the C/N ratios based on BOC are always lower than the total C/N ratio based on the TOC measure. The knowledge of the real bioavailable C/N ratio is crucial for the biological treatments of organic materials. To reduce the test time necessary for BOC determination, the values of BOC for all the samples obtained at different times were compared and correlated with the final BOC. A method that allows for the determination of BOC_AE in 4 d is proposed. In relation to the anaerobic assay, the biogas potential calculated after 21 and 50 d was positively correlated with the final potential defined after 100 d of assay.     

Bioconcentration of two pharmaceuticals (benzodiazepines) and two personal care products (UV filters) in marine mussels (Mytilus galloprovincialis) under controlled laboratory conditions

Bioaccumulation is essential for gaining insight into the impact of exposure to organic micropollutants in aquatic fauna. Data are currently available on the bioaccumulation of persistent organic pollutants, but there is very little documentation on the bioaccumulation of pharmaceuticals and personal care products (PPCPs). The bioconcentration of selected PPCPs was studied in marine mussels (Mytilus galloprovincialis). The selected PPCPs were two organic UV filters, i.e., 2-ethylhexyl-4-trimethoxycinnamate (EHMC) and octocrylene (OC), and two benzodiazepines (BZP), i.e., diazepam (DZP) and tetrazepam (TZP). Laboratory experiments were performed in which M. galloprovincialis was exposed to these compounds either directly from water, for the less lipophilic substances (BZP) or via spiked food for lipophilic UV filters. M. galloprovincialis uptook and eliminated BZP following first-order kinetics. The biological half-life (t (1/2)) of TZP was 1.4?days, resulting in a bioconcentration factor of 64 and 99?mL?g(-1) dry weight (dw), respectively, for 2.3 and 14.5?μg?L(-1) of exposure, while the biological half-life (t (1/2)) of DZP was 0.4?days, resulting in a bioconcentration factor of 51?mL?g(-1) dw for 13.2?μg?L(-1) of exposure. The uptake of UV filter was rapid in mussels, followed by elimination within 24?h. EHMC increased from 15 to 138?ng?g(-1) dw in 1?h and decreased to 25?ng?g(-1) after 24?h for 11.9?μg?L(-1) exposure. OC reached 839?ng?g(-1) dw after 1?h and decreased to 33?ng?g(-1) after 24?h for 11.6?μg?L(-1) exposure. However, EHMC and OC were slightly accumulated in 48?h, i.e., 38 and 60?ng?g(-1) dw, respectively.     

Exergy analysis as a tool for the integration of very complex energy systems: The case of carbonation/calcination CO2 systems in existing coal power plants

A common characteristic of carbon capture and storage systems is the important energy consumption associated with the CO₂ capture process. This important drawback can be solved with the analysis, synthesis and optimization of this type of energy systems. The second law of thermodynamics has proved to be an essential tool in power and chemical plant optimization. The exergy analysis method has demonstrated good results in the synthesis of complex systems and efficiency improvements in energy applications.In this paper, a synthesis of pinch analysis and second law analysis is used to show the optimum window design of the integration of a calcium looping cycle into an existing coal power plant for CO₂ capture. Results demonstrate that exergy analysis is an essential aid to reduce energy penalties in CO₂ capture energy systems. In particular, for the case of carbonation/calcination CO₂ systems integrated in existing coal power plants, almost 40% of the additional exergy consumption is available in the form of heat. Accordingly, the efficiency of the capture cycle depends strongly on the possibility of using this heat to produce extra steam (live, reheat and medium pressure) to generate extra power at steam turbine. The synthesis of pinch and second law analysis could reduce the additional coal consumption due to CO₂ capture 2.5 times, from 217 to 85 MW.     

Kinetic of carbonaceous substrate in an upflow anaerobic sludge sludge blanket (UASB) reactor treating 2,4 dichlorophenol (2,4 DCP)

The performance of an upflow anaerobic sludge blanket (UASB) reactor treating 2,4 dichlorophenol (2,4 DCP) was evaluated at different hydraulic retention times (HRTs) using synthetic wastewater in order to obtain the growth substrate (glucose-COD) and 2,4 DCP removal kinetics. Treatment efficiencies of the UASB reactor were investigated at different hydraulic retention times (2-20 h) corresponding to a food to mass (F/M) ratio of 1.2-1.92 g-COD g(-1) VSS day(-1). A total of 65-83% COD removal efficiencies were obtained at HRTs of 2-20 h. In all, 83% and 99% 2,4 DCP removals were achieved at the same HRTs in the UASB reactor. Conventional Monod, Grau Second-order and Modified Stover-Kincannon models were applied to determine the substrate removal kinetics of the UASB reactor. The experimental data obtained from the kinetic models showed that the Monod kinetic model is more appropriate for correlating the substrate removals compared to the other models for the UASB reactor. The maximum specific substrate utilization rate (k) (mg-COD mg(-1) SS day(-1)), half-velocity concentration (K(s)) (mg COD l(-1)), growth yield coefficient (Y) (mg mg(-1)) and bacterial decay coefficient (b) (day(-1)) were 0.954 mg-COD mg(-1) SS day(-1), 560.29 mg-COD l(-1), 0.78 mg-SS g(-1)-COD, 0.093 day(-1) in the Conventional Monod kinetic model. The second-order kinetic coefficient (k(2)) was calculated as 0.26 day(-1) in the Grau reaction kinetic model. The maximum COD removal rate constant (U(max)) and saturation value (K(B)) were calculated as 7.502 mg CODl(-1)day(-1) and 34.56 mg l(-1)day(-1) in the Modified Stover-Kincannon Model. The (k)(mg-2,4 DCP mg(-1) SS day(-1)), (K(s)) (mg 2,4 DCPl(-1)), (Y) (mg SS mg(-1) 2,4 DCP) and (k(d)) (day(-1)) were 0.0041 mg-2,4 DCP mg(-1) SS day(-1), 2.06 mg-COD l(-1), 0.0017 mg-SS mg(-1) 2,4 DCP and 3.1 x 10(-5) day(-1) in the Conventional Monod kinetic model for 2,4 DCP degradation. The second-order kinetic coefficient (k(2)) was calculated as 0.30 day(-1) in the Grau reaction kinetic model. The maximum 2,4 DCP removal rate constant (U(max)) and saturation value (K(B)) were calculated as 0.01 mg COD l(-1) day(-1) and 9.8 x 10(-3) mg l(-1) day(-1) in the Modified Stover-Kincannon model.     

Evaluation of the Spanish hot dip galvanising sector as a source of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans

A survey to estimate the polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) emissions of Spanish hot dip galvanising sector was carried out during 2002. This investigation is the first presenting Spanish experimental data related to this industrial sector. Three different matrices: flue gas, ash and filter dust were tested to quantify the PCDD/Fs generated during the galvanising process. The organic source of PCDD/F formation could be from the insufficient degreasing o from inhibitors or additives used in the pickling steps such as quinoline, isoquinoline, 8-methylquinoline or polyether phosphoric acid. Low levels PCDD/Fs were achieved in air emissions when air control devices are used. On the contrary, filter dusts are highly contaminated; indicating that the absence of air control devices would increase the risk of fugitive emissions. Homologue profiles and Principal Component Analysis demonstrate there are differences in the formation mechanisms in the bath zone (ashes) compared to the stack location (filter dusts and air emissions), related to the de novo synthesis and reaction time. The annual PCDD/F emission to the atmosphere for this sector during 2002 has been estimated in 0.023g I-TEQ. The emission factor of plants with air control devices has been calculated at 0.030microg I-TEQ/ton of galvanised steel.     

First flush in a combined sewer system

Pollutant first flush was examined in an urban catchment with area of 12.7 ha and drained by a combined sewer system located in northern Italy. A total of 23 rainfall-runoff events were monitored and 281 samples were analyzed. The selected quality parameters were biochemical oxygen demand, chemical oxygen demand, suspended solids, settleable solids, total phosphorus, total nitrogen, ammonium nitrogen, lead, and zinc, specific conductivity and hydrocarbons. A subset of representative storms was selected for first flush analysis. The catchment presented a strong first flush for almost all storms and most constituents. The analysis shows that treating the maximum amount of the early part of the runoff is a better strategy than treating a constant flow rate. Best management practices that can treat or store the first runoff are favored in this kind of system for these water quality parameters.     

Rapid molecular prenatal diagnosis of ataxia-telangiectasia by direct mutational analysis

Mutations of the ataxia-telangiectasia-mutated (ATM) gene are responsible for the autosomal recessive disorder ataxia-telangiectasia (A-T). This study reports the first A-T prenatal diagnosis performed in Spain by direct molecular analysis. The pregnant woman had a previous child suffering from A-T due to a deletion in the ATM gene. The ATM coding region was sequenced in the A-T patient and her parents. Then, a specific polymerase chain reaction (PCR) to detect the deletion was performed for prenatal diagnosis. Additionally, polymorphic HLA loci were examined in order to exclude the possible contamination by maternal DNA. In this family of Gypsy origin, we carried out a rapid molecular diagnosis of A-T. Then, a prenatal diagnosis was carried out, identifying the deletion in the fetal DNA. Additionally, we performed a population study in unrelated Spanish Gypsies and in unrelated controls, showing that the deletion described could be a hotspot in the Spanish Gypsy population. The size of the coding region and the genomic structure, together with the absence of hotspots, make the mutation screening of the ATM gene difficult. The ability to identify ATM mutations provides a tool that can be applied in confirmatory diagnosis, genetic counselling, carrier prediction and prenatal diagnosis. Copyright © 2007 John Wiley & Sons, Ltd.     

Waste management of electric and electronic equipment: comparative analysis of end-of-life strategies

This article analyzes diverse aspects of the waste management of electronic and electric equipment. The scope of the study focuses on end-of-life strategies currently implemented in industrialized economies such as Japan, the United States, and the European Union. The objective is a comparative analysis of such strategies in order to identify logistic issues that may contribute to the further improvement of waste management policies. The results indicate that although all strategies follow the extended producer responsibility principle, in practice several logistic differences arise due to particular interpretations of the concept. In general, it was observed that a direct comparison is rather difficult since the strategies consider different legal frameworks, they cover different types and numbers of products, and the resultant mass flows and related operational costs are highly context-dependent variables. Therefore, it is not possible to indicate which strategy presents the highest overall efficiency. The study concludes that a little contribution is feasible if the advantages and weaknesses of the models depicted and discussed here are considered in further regulatory decisions.Extended version of the poster presentation A comparative analysis of end-of-life strategies for home appliances in Japan, America, and the European Union, accepted at the 31st Annual Meeting of Environmental Systems Research, Japan Society of Civil Engineers (JSCE), October 24–25, 2003, Kitakyushu, Japan     

A stochastic model for the use of a country park

The subject of this theoretical study is a country park with a very delicate natural environment, located near large urban areas, as a result of which it receives a heavy inflow of visitors.The problem is that of determining the best organization of the park to achieve a distribution of visitors which is compatible with the protection of the natural environment. Therefore a mathematical model is sought which describes the distribution of visitors in relation to the various zones within the park.In this paper the mathematical model and its subsequent calibration are described.