The response of soil Arthrobacter agilis lush13 to changing conditions: Transition between vegetative and dormant state

This work was aimed at studying the response of soil non-spore-forming actinobacterial strain Arthrobacter agilis Lush 13 to changing natural conditions, such as nutrient availability and the presence of degradable and recalcitrant aliphatic and aromatic substrates. The A. agilis strain Lush13 was able to degrade octane, nonane, hexadecane, benzoate, phenol, and 2,3-, 2,4-, 2,5-, 2,6-dichlorophenols, but not grew on 3,4-dichlorophenol, 2,3,4-, 2,4,5-, 2,4,6-trichlorophenol (TCP), pentachlorophenol (PCP), 2-chlorobenzoate, 3-chlorobenzoate, 3,5-dichlorobenzoate, 2,4-dichlorobenzoate. Under growth-arresting conditions due to nitrogen- or multiple starvation or recalcitrant (non-utilizable) carbon source, the studied strain preserved viability for prolonged periods (4–24 months) due to transition to dormancy in the form of conglomerated small and ultrasmall cyst-like dormant cells (CLC). Dormant cells were shown to germinate rapidly (30 min or later) after removal of starvation stress, and this process was followed by breakdown of conglomerates with the eliberation and further division of small multiple actively growing daughter cells. Results of this study shed some light to adaptive capabilities of soil arthrobacters in pure and polluted environments.     

Physicochemical characteristics,mutagenicity and genotoxicity of airborne particles under industrial and rural influences in Northern Lebanon

In this work, the main objectives were to assess the mutagenic and genotoxic effects of fine particulate matter collected in an industrial influenced site in comparison with a non-industrial influenced one (rural site) and to relate the particulate matter (PM) composition to the observed genotoxic effects. At the industrial influenced site, higher concentrations of phosphates, trace metals, and polycyclic aromatic hydrocarbons (PAHs) in particles could be related to the contributions of quarries, fertilizer producer, cement plants, and tires burning. Gasoline and diesel combustion contributions were evidenced in particles collected at both sites. Particles collected under industrial influence showed a higher mutagenic potential on three tested strains of Salmonella typhimurium (TA98, YG1041, and TA102), and especially on the YG1041, compared to particles from the rural site. Furthermore, only particles collected in the vicinity of the industrial site showed a tendency to activate the SOS responses in Escherichia coli PQ37, which is indicative of DNA damage as a result of exposure of the bacteria cells to the action of mutagenic samples. The mutagenicity and genotoxicity of the industrial PM_2.5–0.3 particulates may be attributed to its composition especially in organic compounds. This study showed that proximity of industries can affect local PM composition as well as PM genotoxic and mutagenic potential.     

Status differences in collective action and forest benefits: evidence from joint forest management in India

Does status matter in community-based forest management? If so, are the high-status households more benefited than the low-status households? What drives status differences, if any, in the appropriation of forest resources? To address these questions, we draw on a theory of status and resource use that defines one’s status as one’s relative position in a group on the basis of power, prestige, honor and deference. Following this perspective, we surveyed the heads of 341 forest-based rural households in India from 2009 to 2010. We find that collective actions themselves are status-driven and the high-status households are more interested and involved in status-maintaining collective actions such as decision-making and implementation, while the low-status households perform general tasks like forest patrol. Moreover, the high-status households derive benefits from local forest significantly more than the low-status households. Further, decomposition analysis shows that a household’s prestige and honor measured by its access to social resources, problem faced and useful contacts explain about 56 % of the status gap in forest benefits, while socioeconomic characteristics explain only 16 % of the gap. Thus, due emphasis on household status from a broader socioeconomic perspective is required to reduce inequality in participation and the distribution of forest benefits in co-management.     

The social and scientific values that shape national climate scenarios: a comparison of the Netherlands,Switzerland and the UK

This paper seeks to understand why climate information is produced differently from country to country. To do this, we critically examined and compared the social and scientific values that shaped the production of three national climate scenarios in the Netherlands, Switzerland and the UK. A comparative analysis of documentary materials and expert interviews linked to the climate scenarios was performed. Our findings reveal a new typology of use-inspired research in climate science for decision-making: (i) innovators, where the advancement of science is the main objective; (ii) consolidators, where knowledge exchanges and networks are prioritised; and (iii) collaborators, where the needs of users are put first and foremost. These different values over what constitutes ‘good’ science for decision-making are mirrored in the way users were involved in the production process: (i) elicitation, where scientists have privileged decision-making power; (ii) representation, where multiple organisations mediate on behalf of individual users; and (iii) participation, where a multitude of users interact with scientists in an equal partnership. These differences help explain why climate knowledge gains its credibility and legitimacy differently even when the information itself might not be judged as salient and usable. If the push to deliberately co-produce climate knowledge is not sensitive to the national civic epistemology at play in each country, scientist–user interactions may fail to deliver more ‘usable’ climate information.

     

Overview of surface measurements and spatial characterization of submicrometer particulate matter during the DISCOVER-AQ 2013 campaign in Houston,TX

The sources of submicrometer particulate matter (PM₁) remain poorly characterized in the industrialized city of Houston, TX. A mobile sampling approach was used to characterize PM₁ composition and concentration across Houston based on high-time-resolution measurements of nonrefractory PM₁ and trace gases during the DISCOVER-AQ Texas 2013 campaign. Two pollution zones with marked differences in PM₁ levels, character, and dynamics were established based on cluster analysis of organic aerosol mass loadings sampled at 16 sites. The highest PM₁ mass concentrations (average 11.6 ± 5.7 µg/m³) were observed to the northwest of Houston (zone 1), dominated by secondary organic aerosol (SOA) mass likely driven by nighttime biogenic organonitrate formation. Zone 2, an industrial/urban area south/east of Houston, exhibited lower concentrations of PM₁ (average 4.4 ± 3.3 µg/m³), significant organic aerosol (OA) aging, and evidence of primary sulfate emissions. Diurnal patterns and backward-trajectory analyses enable the classification of airmass clusters characterized by distinct PM sources: biogenic SOA, photochemical aged SOA, and primary sulfate emissions from the Houston Ship Channel. Principal component analysis (PCA) indicates that secondary biogenic organonitrates primarily related with monoterpenes are predominant in zone 1 (accounting for 34% of the variability in the data set). The relevance of photochemical processes and industrial and traffic emission sources in zone 2 also is highlighted by PCA, which identifies three factors related with these processes/sources (~50% of the aerosol/trace gas concentration variability). PCA reveals a relatively minor contribution of isoprene to SOA formation in zone 1 and the absence of isoprene-derived aerosol in zone 2. The relevance of industrial amine emissions and the likely contribution of chloride-displaced sea salt aerosol to the observed variability in pollution levels in zone 2 also are captured by PCA.

Implications: This article describes an urban-scale mobile study to characterize spatial variations in submicrometer particulate matter (PM₁) in greater Houston. The data set indicates substantial spatial variations in PM₁ sources/chemistry and elucidates the importance of photochemistry and nighttime oxidant chemistry in producing secondary PM₁. These results emphasize the potential benefits of effective control strategies throughout the region, not only to reduce primary emissions of PM₁ from automobiles and industry but also to reduce the emissions of important secondary PM₁ precursors, including sulfur oxides, nitrogen oxides, ammonia, and volatile organic compounds. Such efforts also could aid in efforts to reduce mixing ratios of ozone.     

Marginal abatement cost curve for nitrogen oxides incorporating controls,renewable electricity,energy efficiency,and fuel switching

A marginal abatement cost curve (MACC) traces out the relationship between the quantity of pollution abated and the marginal cost of abating each additional unit. In the context of air quality management, MACCs are typically developed by sorting control technologies by their relative cost-effectiveness. Other potentially important abatement measures such as renewable electricity, energy efficiency, and fuel switching (RE/EE/FS) are often not incorporated into MACCs, as it is difficult to quantify their costs and abatement potential. In this paper, a U.S. energy system model is used to develop a MACC for nitrogen oxides (NO_x) that incorporates both traditional controls and these additional measures. The MACC is decomposed by sector, and the relative cost-effectiveness of RE/EE/FS and traditional controls are compared. RE/EE/FS are shown to have the potential to increase emission reductions beyond what is possible when applying traditional controls alone. Furthermore, a portion of RE/EE/FS appear to be cost-competitive with traditional controls.

Implications: Renewable electricity, energy efficiency, and fuel switching can be cost-competitive with traditional air pollutant controls for abating air pollutant emissions. The application of renewable electricity, energy efficiency, and fuel switching is also shown to have the potential to increase emission reductions beyond what is possible when applying traditional controls alone.     

Effectiveness of Africa's tropical protected areas for maintaining forest cover

The effectiveness of parks for forest conservation is widely debated in Africa, where increasing human pressure, insufficient funding, and lack of management capacity frequently place significant demands on forests. Tropical forests house a substantial portion of the world's remaining biodiversity and are heavily affected by anthropogenic activity. We analyzed park effectiveness at the individual (224 parks) and national (23 countries) level across Africa by comparing the extent of forest loss (as a proxy for deforestation) inside parks to matched unprotected control sites. Although significant geographical variation existed among parks, the majority of African parks had significantly less forest loss within their boundaries (e.g., Mahale Park had 34 times less forest loss within its boundary) than control sites. Accessibility was a significant driver of forest loss. Relatively inaccessible areas had a higher probability (odds ratio >1, p < 0.001) of forest loss but only in ineffective parks, and relatively accessible areas had a higher probability of forest loss but only in effective parks. Smaller parks less effectively prevented forest loss inside park boundaries than larger parks (T = ?2.32, p < 0.05), and older parks less effectively prevented forest loss inside park boundaries than younger parks (F_2,154 = ?4.11, p < 0.001). Our analyses, the first individual and national assessment of park effectiveness across Africa, demonstrated the complexity of factors (such as geographical variation, accessibility, and park size and age) influencing the ability of a park to curb forest loss within its boundaries.     

Effect of temperature and precipitation on linear increment of <Emphasis Type="Italic">Sphagnum fuscum</Emphasis> and <Emphasis Type="Italic">S. magellanicum</Emphasis> in Western Siberia

The linear increment of Sphagnum fuscum and S. magellanicum in ombrotrophic mires of Western Siberia has been measured during two years over a transect about 2500 km long extending from forest–steppe to forest–tundra. Along the latitudinal gradient, the increment of both species has proved to be correlated with annual average air temperature and, in S. magellanicum, also with annual precipitation. The determinants of their growth differ between the southern, central, and northern parts of the study region. At the regional level, the annual and summer precipitation plays a more important role than the average air temperature. The increment of S. fuscum in the southern part is positively correlated with the amount of precipitation and negatively correlated with summer temperature, whereas the situation in the central part is inverse. In S. magellanicum, the linear increment is directly dependent on the annual average temperature and annual and summer precipitation in the south and on the annual and summer precipitation in the north of Western Siberia. The dynamics of linear growth of both species in bog pine forests during the growing season are similar: its rate is the highest in June, when the linear increment of S. fuscum and S. magellanicum amounts to 60 and 85% of the annual total, respectively.