Catalytic conversion of waste tyres into valuable hydrocarbons

Tyre recycling has become a necessity because of the huge piles of tyres that represent a threat to the environment. The used tyres represent a source of energy and valuable chemical products. Waste tyres were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calcium carbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect of temperature, amount of catalyst and time on the yields of the pyrolysed products was investigated. Char yield decreased with increase of pyrolysis temperature while total gas and liquid yields increased. The liquid fraction was obtained with boiling point up to 320 °C. The physical and chemical properties of the pyrolysed products obtained were characterized. The catalytic pyrolysis produced 45 wt.% aromatic, 35 wt.% aliphatic and 20 wt.% of polar hydrocarbons. The distillation data showed that ∼80% of oil has boiling point below 270 °C which is the boiling point for 50% of distilled product in commercial diesel oil. The oil fraction was found to have high gross calorific value; GCV (42.8 MJ kg⁻¹). Its Specific gravity, viscosity, Kinematic viscosity, freezing point and diesel index were also within the limits of diesel fuel. The char residues were studied to investigate their characteristics for use as a possible adsorbent. Surface area of char before and after acid demineralization was determined to determine the adsorptive features for waste water treatment.     

Mapping farmers’ vulnerability to climate change and its induced hazards: evidence from the rice-growing zones of Punjab,Pakistan

Environmental Science and Pollution Research - In developing countries like Pakistan, agriculture constitutes the primary source of support for the majority of rural and the adjacent urban...     

A mini-review on rare earth metal-doped TiO<Subscript>2</Subscript> for photocatalytic remediation of wastewater

Titanium dioxide (TiO₂) has been considered a useful material for the treatment of wastewater due to its non-toxic character, chemical stability and excellent electrical and optical properties which contribute in its wide range of applications, particularly in environmental remediation technology. However, the wide band gap of TiO₂ photocatalyst (anatase phase, 3.20 eV) limits its photocatalytic activity to the ultraviolet region of light. Besides that, the electron-hole pair recombination has been found to reduce the efficiency of the photocatalyst. To overcome these problems, tailoring of TiO₂ surface with rare earth metals to improve its surface, optical and photocatalytic properties has been investigated by many researchers. The surface modifications with rare earth metals proved to enhance the efficiency of TiO₂ photocatalyts by way of reducing the band gap by shifting the working wavelength to the visible region and inhibiting the anatase-to-rutile phase transformations. This review paper summarises the attempts on modification of TiO₂ using rare earth metals describing their effect on the photocatalytic activities of the modified TiO₂ photocatalyst.     

Concentrations of Heavy Metals in Hair and Nails of Young Pakistanis: Correlation with Dietary Elements

Hair and nail samples from young Pakistani adults were separately analyzed for quantification of Cd, Cr, Cu, Ni, Pb, and Zn concentrations. The concentrations of these metals were also analyzed in commonly consumed local foods to evaluate potential correlation of hair and nail concentrations with diet. Pearson correlation coefficients ranged from 0.349 to 0.999, demonstrating diet to be a significant contributor for accumulation of heavy metals in humans.     

Impacts of continuously regenerating trap and particle oxidation catalyst on the NO2 and particulate matter emissions emitted from diesel engine

Two continuously regenerating diesel particulate filter (CRDPF) with different configurations and one particles oxidation catalyst (POC) were employed to perform experiments in a controlled laboratory setting to evaluate their effects on NO₂, smoke and particle number emissions. The results showed that the application of the after-treatments increased the emission ratios of NO₂/NO_x significantly. The results of smoke emissions and particle number (PN) emissions indicated that both CRDPFs had sufficient capacity to remove more than 90% of total particulate matter (PM) and more than 97% of solid particles. However, the POC was able to remove the organic components of total PM, and only partially to remove the carbonaceous particles with size less than 30 nm. The negligible effects of POC on larger particles were observed due to its honeycomb structure leads to an inadequate residence time to oxidize the solid particles or trap them. The particles removal efficiencies of CRDPFs had high degree of correlations with the emission ratio of NO₂/NO_x. The PN emission results from two CRDPFs indicated that more NO₂ generating in diesel oxidation catalyst section could obtain the higher removal efficiency of solid particles. However this also increased the risk of NO₂ exposure in atmosphere.     

Agricultural factor endowment differences and relative poverty nexus: an analysis of macroeconomic and social determinants

Environmental Science and Pollution Research - Poverty is a significant global ongoing issue that influences a substantial amount of people despite all efforts to eliminate or lessen it. Although...     

The impact of COVID-19 pandemic on air pollution: a global research framework,challenges, and future perspectives

Environmental Science and Pollution Research - As a result of extreme modifications in human activity during the COVID-19 pandemic, the status of air quality has recently been improved. This...     

Anthropogenic climate change drives melting of glaciers in the Himalaya

Environmental Science and Pollution Research - The Himalayan glaciers provide water to a large population in south Asia for a variety of purposes and ecosystem services. As a result, regional...     

Recovery of critical metals from leach solution of electronic waste using magnetite electrospun carbon nanofibres composite

Environmental Science and Pollution Research - Scarcity in mining and geo-political direction diverts attention toward critical metal recycling. Gallium (Ga), indium (In) and germanium (Ge) are...