Nano-textured polysilicon solar absorption films

Nano-textured polysilicon (poly-Si) solar absorption films are to be applied to the solar receiver of solar thermal electricity Stirling engine. These films were fabricated by deposition of hydrogenated amorphous silicon films (a-Si:H) into poly-Si films, using the pulse-wave modulation plasma and furnace annealing of the a-Si:H films. This is followed by wet etching of poly-Si films into nano-textured structures. The films are then coated with a-SiN_x:H films as the antireflection and protection layers. It was observed that increasing the pulsed plasma turn-on (t_on) time leads to deposition of less dense a-Si:H film with high hydrogen content and void density. This results in films having low dielectric constant and refractive index, and high optical bandgap. Less-dense a-Si:H film can be transferred into large grain size poly-Si film, using annealing. Also, highly rough nano-textured surface structure can be produced, by etching. The denser a-Si:H film, large grain size poly-Si film, and nano-textured surface poly-Si film can enhance the absorbance of sunlight and reduce the emissivity of far infrared light. The nano-textured poly-Si film coated with an a-SiN_x:H layer can effectively increase the absorbance of sunlight to approximately 85% and reduce the emissivity of far infrared light to 49%. The nano-textured poly-Si/a-SiN_x:H films can be used as efficient solar absorption films for solar thermal electricity Stirling engine.     

Thermal detoxification of hazardous metal sludge by applied electromagnetic energy

Industrial wastewater sludge was treated by microwave processes to enhance the stabilization of laden copper. The effects of additives, processing time, microwave adsorbents, moisture content, reaction atmosphere, and cooling gas were investigated. The stabilization results were significantly enhanced by metal powder additives, prolonged microwave processing time, proper moisture content, the addition of carbonaceous materials, and a reaction environment with inert gas. It was also found that the moisture content would increase the homogeneity of applied microwave energy, and thus achieve a better overall efficiency between stabilizing agents and copper. The added metal powders may reduce Cu(II) to Cu(0) in the sludge or TCLP. The resulting thermal energy of microwave radiation, and microarcing process and the oxidation heat of Al powder may also assist the transformation of Cu(II) into CuO and CuAl2O4 phases. Part of the sludge was vitrified within inert gas environment when the processing time was longer than 18 min and active carbon dosage was more than 3g. Reduction reactions also occurred in the hybrid microwave processes, leading to the reduction of sulfates and metal ions, and the formation of Cu2S and FeS. Moreover, the microwave radiation can also enhance the feasibility of co-treating of inorganic and organic solid waste.     

Determinations and residual characteristics of triclosan in household food detergents of Taiwan

Triclosan (2,4,4'-trichloro-2'-hydroxydiphenyl ether) is a widely used antibacterial agent. However, it was concerned recently that triclosan might act as an antibiotic and will cause resistant bacterial strains. Furthermore, possible formation of toxic chloroform was also reported when the triclosan contained in household dishwashing soaps reacted with the chlorinated water. To assess the associate risks from possible exposures, concentrations of triclosan in household food detergents of Taiwan were determined in this study. High performance liquid chromatography (HPLC) with UV detector at 280 nm was used to analyze the triclosan in samples. Factors that might affect the residual characteristics of triclosan from detergents on dishware and fruits, including the concentrations of detergents used, the temperature and immersion time for water before the cleaning processes, the temperatures of water used for the cleaning processes, and the materials of dishware made of, were evaluated under the orthogonal experiment design by the Taguchi method. By the analysis of variance, the orders of importance of different parameters were determined. The concentrations of triclosan detected in household food detergents were found to be 1.7 x 10(-2) -5.6 x 10(-1) (triclosan/detergent, mg g(-1)). For residual characteristics, the concentration of detergents used as well as the materials of dishware were found to be the significant factors that will affect the triclosan left on the dishware. On the other hand, the concentration of triclosan in the detergents was found to be the only factor that will affect the triclosan left on fruits. The maximum dose of triclosan exposures from the use of household food detergents in Taiwan was also estimated in the study.     

Alternative immunofluorescent labeling of Cryptosporidium parvum in water samples using semiconductor quantum dots

The application of immunofluorescent labeling using quantum dots for detection of inactivated Cryptosporidium parvum oocysts in spiked water samples (reservoir water, treated wastewater effluent, permeate of a membrane bioreactor, and tap water) provided more consistent results compared with the organic fluorophores label. The varying degree of particles present in the different water samples (with turbidity ranging from 0.2 to 6.1 NTU) in nonconcentrated water samples had insignificant interference on the labeled counts (2-sample t-tests, p > 0.236) using the quantum dot label, while the quantum dot label provided an advantage of approximately 50% lower interference in concentrated water samples compared with the organic fluorophores label.     

INTEGRATED MANAGEMENT OF QUANTITY AND QUALITY OF URBAN WATER RESOURCES1

ABSTRACT. This paper will present a total water quality-quantity management approach which has incorporated the costs of water pollution control and water treatment, the benefits of water-based activities, and the trade-off between low flow augmentation and water quality improvement in its consideration. The analytical framework is based on the decomposition procedures provided by dynamic programming within which the optimal management plans are developed.     

Algal removal from cyanobacteria-rich waters by preoxidation-assisted coagulation–flotation: Effect of algogenic organic matter release on algal removal and trihalomethane formation

The cyanobacteria-bloom in raw waters frequently causes an unpredictable chemical dosing of preoxidation and coagulation for an effective removal of algal cells in water treatment plants. This study investigated the effects of preoxidation with NaOCl and ClO_2 on the coagulation-flotation effectiveness in the removal of two commonly blooming cyanobacteria species, Microcystis aeruginosa(MA) and Cylindrospermopsis raciborskii(CR), and their corresponding trihalomethane(THM) formation potential. The results showed that dual dosing with NaOCl plus ClO_2 was more effective in enhancing the deformation of cyanobacterial cells compared to single dosing with Na OCl, especially for CR-rich water.Both preoxidation approaches for CR-rich water effectively reduced the CR cell count with less remained dissolved organic carbon(DOC), which benefited subsequent coagulation–flotation. However, preoxidation led to an adverse release of algogenic organic matter(AOM) in the case of MA-rich water. The release of AOM resulted in a poor removal in MA cells and a large amount of THM formation after oxidation-assisted coagulation-flotation process. The reduction in THM formation potential of CR-rich waters is responsible for effective algae and DOC removal by alum coagulation. It is concluded that the species-specific characteristic of cyanobacteria and their AOM released during chlorination significantly influences the performance of coagulation–flotation for AOM removal and corresponding THM formation.     

GOES IR AND DUMMY VARIABLE TECHNIQUES FOR LOW TEMPERATURE ASSESSMENT IN FLORIDA1

ABSTRACT: Geostationary Operational Environmental Satellite (GOES) thermal infrared (IR) data were used to study regional cold nocturnal temperature fluctuations that are important in assessing citrus freeze damage. Dummy variables techniques were used to analyze the temperature difference between the east and west sides of Central Florida, which was obtained from both ground measurement minimum temperature (T_GMM) and the GOES mean temperature (T_GOES) on low-temperature nights. The low temperature pattern, which was closely related to the citrus freeze damage pattern in Central Florida, was identified by GOES thermal IR data but not by conventional ground measurements. The low surface temperature in the west side and east side appears to be attributable to differences in soil types, water tables, and drainage classes in both regions.     

DECISION ANALYSIS FOR THE RIVER WALK EXPANSION IN SAN ANTONIO,TEXAS1

ABSTRACT: The San Antonio River Walk is considered a unique tourist attraction as well as an urban rejuvenation catalyst for San Antonio, Texas. This utilization of the mile-long horseshoe bend in the downtown area of San Antonio is as successful and imaginative as can be found in the United States. Testimony is very strong from San Antonio voters and outside visitors of the great social and economic value of the River Walk. This overwhelming success has led to plans for expansion of the present River Walk. The River Walk expansion decision should not be evaluated merely on a benefit-cost ratio. It has become the recommendation of the Water Resources Council that intangible attributes such as recreational values and social impacts should be considered as well as tangible attributes such as cost. This prevailing attitude has highlighted the application of decision analysis techniques with multiattribute utility ratings. Decision analysis is a systematic solution procedure which can be used to crystallize a complicated decision problem into manageable subproblems by ranking the decision alternatives in accordance with cardinal utility values attached to their consequences. Recent advances in multiattribute utility theory allow a decision maker to weigh utility assessment over tangible and intangible attributes according to their relative importance. This insures that the intangible attributes will receive due consideration in the final decision-making.     

Reusing pretreated desulfurization slag to improve clinkerization and clinker grindability for energy conservation in cement manufacture

The purpose of this study was to combine the physical pretreatments of grinding, sieving, and magnetic-separation processes to reclaim iron-rich materials from the desulfurization slag, and to use the remainder for cement clinker production. The iron-rich materials can be separated out efficiently by grinding for 30 min and sieving with a 0.3 mm mesh. The non-magnetic fraction of the particles smaller than 0.3 mm was in the majority, and proved to be suitable for use as a cement raw material. The raw mixes prepared with a pretreated desulfurization slag had a relatively high reactivity, and the temperature at which alite forms was significantly reduced during the clinkerization process. The clinkers produced with 10% desulfurization slag had a high level of alite and good grindability. Generally, the improvements in clinkerization and clinker grindability are beneficial to energy conservation in cement manufacture.