Inactivation of antineoplastics in clinical wastewater by electrolysis

Wastewater from clinical institutions contains a considerable amount of toxic substances. Among the toxic substances, antineoplastics may induce carcinogenesis, teratogenesis, and the emergence of mutant microorganisms in the environment. Although the incineration or chemical treatments of disposed antineoplastics are recommended, a high energy during incineration and a careful quality control during chemical treatment are required. In this study, we determined the conditions for the electrolytic treatment of an antineoplastic, epirubicin hydrochloride (EH), using two platinum electrodes with a constant current of 100 mA. We analyzed the cytotoxicity, mutagenicity and antibacterial activity of electrolyzed EH and compared them with those of unelectrolyzed EH. Nearly 100% cytotoxicity, mutagenicity and antibacterial activity were eliminated and HPLC did not detect an EH molecule, in the case of electrolysis for 6 h. We also examined the biological cytotoxicities of electrolyzed irinotecan hydrochloride, vincristine sulfate, mitomycin C, paclitaxel, methotrexate and cisplatin, and found that 72.1-99.999% toxicity was eliminated by electrolysis under the same conditions. The biological toxicity of a mixture of these drugs was determined to be decreased by approximately 99% by electrolysis under the same conditions.     

Catalyst durability in steam reforming of thermally decomposed waste wood

Thermal gasification and reforming technologies applicable over a wide temperature range were investigated for high efficiency and for the calorific value of the gas evolved from organic waste such as woody debris. The durability of the reforming catalyst and the availability of catalyst regeneration were investigated using laboratory-scale catalytic reformers and a gasifier. Commercial Ni-based catalyst and calcined limestone (CaO) were applied to the reforming reaction. The results of woody waste gasification and reforming revealed the hydrogen concentration produced to be sustained at a high catalyst temperature of 1123 K, which prevented the catalyst from deactivating. The results also indicated that catalyst regeneration by air oxidation at the same temperature would be effective for enhancing catalytic activity.     

Fabric-filter-supported catalyst for removal of harmful solid and gaseous compounds in municipal waste incinerator exhaust gas: characteristics of NO x reduction

We have investigated a fabric-filter-supported catalyst for removing harmful solid and gaseous compounds simultaneously from municipal incinerator exhaust gas. We studied the ways in which the efficiency of NO _x removal is influenced by filter temperature, gas flow rate, and catalyst content. The reduction of the catalyst content by mechanical reverse washing was investigated, and the state of the catalyst supported in the fabric filter was also observed using a scanning electron microscope. The catalyst supported by the fabric filter showed a removal efficiency above 75% when the filter temperature was 200°C, the gas flow rate was 1 m/min, and the catalyst content of the fabric filter was above 300 g/m². The catalyst was supported uniformly on the fibers of the fabric filter, and fine catalyst particles remained on the fibers after mechanical reverse washing. Received: October 15, 1997 / Accepted: March 19, 1999     

Growth and Nitrogen Availability of Red Pine Seedlings under High Nitrogen Load and Elevated Ozone

To evaluate the effect of increasing nitrogen (N) deposition and tropospheric ozone (O₃) concentrations on N-saturated forest ecosystems, we investigated the response of Japanese red pine (Pinus densiflora), an N-saturation sensitive tree species, to increasing N load under elevated O₃ concentrations. One-year-old seedlings of red pine were treated with three levels of N supply (0, 50 and 100 mg N L^-1 fresh soil volume) under two levels of atmospheric O₃ concentration (< 5 and 60 ppb) for two growing seasons. Nitrogen treatment did not stimulate dry matter production of the seedlings. Growth inhibition was observed in the highest N treatment under low O₃ and in the two higher N treatments under elevated O₃. Irrespective of the O₃ concentration, increasing N supply negatively affected root growth and mycorrhizal development in fine roots, resulting in a reduction in P and Mg uptake from the soil. Net photosynthetic rate was significantly reduced by both the highest N treatment under low O₃ and the two higher N treatments under elevated O₃, together with decreased N-availability to Rubisco. Nitrogen assimilated from NO₃ ^- to amino acid in the needles was not affected by the treatments. However, needle protein concentration was reduced by the highest N-treatment under low O₃ and by the two higher N-treatments under elevated O₃. These results suggest that elevated O₃ potentially disturbs the N-availability in the form of protein including Rubisco, and may advance the negative effects of excessive N-deposition on N-sensitive plant species in N-saturated forests.     

Extraction and cleanup methods of dioxins in house dust from two cities in Japan using accelerated solvent extraction and a disposable multi-layer silica-gel cartridge

A simple and rapid method for the extraction and cleanup of dioxins from house dust was developed using an accelerated solvent extraction (ASE) method and a multi-layer silica-gel cartridge. It was found that the WHO-TEQ levels of dioxins extracted from the house dust obtained by both a conventional soxhlet extraction and the ASE were almost equal, when the data obtained by both methods were compared. As for the cleanup method, a multi-layer silica-gel cartridge yielded higher dioxin recoveries than the alkaline digestion method. The average values of the dioxins in house dust from Kumagaya city and Sendai city in Japan (Sendai city is bigger than Kumagaya city with respect to the population and industry), were 15.6 pg TEQ/g (8.6-26.0 pg TEQ/g, n=5, Kumagaya city) and 16.0 pg TEQ/g (5.9-30.5 pg TEQ/g, n=5, Sendai city), respectively.     

Model analysis of interactive effects of ozone and water stress on the yield of soybean

The interactive effects of ozone and water stress on the yield of soybean (Glycine max (L.) Merr. 'Davis') were addressed with a growth model of soybean. Two simulations were conducted, using the data from the exposures of soybean to ozone in open-top chambers under two soil moisture regimes, and the results of the simulations were compared. In the original simulation, soil moisture content was calculated based on a water budget using the actual precipitation and irrigation data. In the modified simulation, the soil water content was given as input data. In this case, soil moisture content was maintained at the same level across the ozone treatments regardless of different water use by the plants. Both simulations included the effect of reduced ozone flux to the leaves due to water stress, whereas only the original simulation included the effect of mitigated water stress due to reduced water use by the plants under higher ozone concentration. The water stress reduced ozone impact on soybean yield in the original simulation on the basis of the ozone dosecrop yield response relationship, but not in the modified simulation. The ozone uptake rate was reduced by water stress in the original simulation, but the relationship between seasonal mean ozone uptake rate and relative yield still showed reduced impact of ozone due to water stress. These results indicated that the alleviation of water stress by ozone due to reduced plant water use in ozone-treated plots can be a contributing factor in the reduction of ozone impact by water stress. The above conclusion was partly confirmed by the actual data for soil water content, which was significantly lower in the lowest ozone treatment than in the higher ozone treatments. Further experimental and modelling studies are needed to elucidate the mechanism of the ozone X water stress interaction.     

Degradation of a Terephthalate-containing Polyester by Thermophilic Actinomycetes and <Emphasis Type="Italic">Bacillus</Emphasis> Species Derived from Composts

We intended to find thermophilic degraders of terephthalate-containing Biomax^® films. Films in mesh bags were buried in composts (inside temperature: approximately 55–60 °C), resulting in the degradation of them in 2 weeks. Fluorescent microscopy of films recovered from composts showed that microorganisms gradually covered the surface of a film during composting. DGGE analysis of microorganisms on the composted film indicated the presence of Bacillus species as main species (approximately 80% of microbial flora) and actinomycetes (approximately 10–20%) as the second major flora. Isolation of Biomax^®-utilizing bacteria was focused on these two genera: two actinomycetes and one Bacillus species were isolated as pure best degraders from the composted polymer films, which were fragmented into small pieces. All the strains were thermophilic and identified, based on their 16S rDNA analyses. Degradation of polymer films was confirmed by (1) accelerated fragmentation of films in composts, compared with a control (no inoculum) and resultant decrease in molecular weights, (2) growth in a powdered Biomax^® medium, compared with a control without powdered Biomax^®, and (3) production of terephthalate in a powdered Biomax^® medium. In this way, we concluded that these bacteria were useful for degradation of thermostable Biomax^® products.     

Removal of carotene-like colored compounds by liquid-liquid extraction during polycyclic aromatic hydrocarbons analysis of plant tissue

Plants contain a wide variety of chemicals, some of which may have similar chromatographic behavior to polycyclic aromatic hydrocarbons (PAHs). During solid phase extraction (SPE) with Si-gel for instance, the co-elution of carotene-like colored compounds with PAHs has been observed. In this paper, liquid–liquid extraction was applied for the separation and subsequent analysis of PAHs from plant extracts. PAHs containing 2–6 rings, which include naphthalene, phenanthrene, pyrene, benzo[a]pyrene and benzo[ghi]perylene, were used as representative target chemicals. Carotene-like compounds extracted from Komatsuna (Brassica campestris) shoot by acetone followed by Si-gel treatment were incorporated as undesired components in the model matrix. Results showed the feasibility of employing either acetonitrile or 2% (w/v) KOH–methanol as solvents for high PAHs recovery and low extraction of colored fraction. For acetonitrile, 86.9–93.5% of each PAH could be recovered after three extraction cycles (relative standard deviation, RSD < 1.6%) with only about 10% co-extraction of colored fraction. For 2% KOH–methanol, PAHs recoveries ranging from 79.3% to 83.1% after five cycles (RSD < 1.5%) were achieved while the percent extraction of colored fraction was also low at 10%. The relatively higher selectivity of the solvents for PAHs over the colored fraction as well as the solubility of the matrix solution in the solvent may have contributed to these results. On this basis, liquid–liquid extraction is very useful for the pre-treatment of plant extracts for PAHs analysis.     

Analysis of acylcarnitines in maternal urine for prenatal diagnosis of glutaric aciduria type 2

The urinary acylcarnitine profiles of two mothers whose first children were diagnosed to have glutaric aciduria type 2 (multiple acyl-CoA dehydrogenation deficiency, electron transfer flavoprotein (ETF) deficiency) were analysed in the second pregnancy. Large volumes of tigrylcarnitine and isovalerylcarnitine and a little glutarylcarnitine were detected. Each fetus was also diagnosed to be abnormal by enzyme activity and immunoassay of ETF protein. The acylcarnitines in the mothers' urine disappeared in 1 week after labour or artificial abortion. Acylcarnitines were never detected in the urine of controls.