Evaluation of sediment quality guidelines derived using the screening-level concentration approach for application at uranium operations in Saskatchewan,Canada

Sediment quality guidelines (SQGs) can be derived using different approaches and are commonly used in environmental management, reclamation, and risk assessment. The screening-level concentration (SLC) approach has been used in Ontario, Canada, to derive lowest effect levels (LELs) and severe effect levels for use as SQGs. This approach was adopted by the Canadian Nuclear Safety Commission (CNSC) to set guidelines for metals (As, Cr, Cu, Pb, Mo, Ni, Se, U, and V) and radionuclides (Ra-226, Pb-210, and Po-210) in sediment at northern Saskatchewan uranium mining and milling operations. The SLC approach is based on total metal and radionuclide concentrations in sediment, and corresponding benthic community composition data for a specific sampling site. In this study, sediment chemistry (total metals and radionuclides) and benthic community data from northern Saskatchewan uranium operations were compiled and examined. Results indicate that the CNSC-derived SQGs had limited relationships to observed effects, or lack thereof, on benthic invertebrate communities near uranium operations in Saskatchewan. The LELs were found to correctly align with effects at 95% of the sites that had effects, on a general basis, but on an element-specific basis many of the elements had concentrations at effect sites below their LELs. Furthermore, concentrations of the evaluated elements exceeded at least one LEL at 60% of the no-effect sites. The high number of exceedences of LELs at reference and no-effect sites (false-positives) calls to question the appropriateness of the CNSC-derived SQGs. It is suggested that alternatives to the SLC approach be explored.     

Silver near municipal wastewater discharges into western Lake Ontario,Canada

Because of the widespread use of silver nanoparticles in commercial products, discharges of municipal wastewater may be a point source of silver in the aquatic environment. We monitored two sites in western Lake Ontario impacted by discharges from wastewater treatment plants serving the City of Toronto. Concentrations of silver were elevated in bottom sediments and suspended sediments collected at the two sites. We also deployed two types of passive samplers in the water column at the two sites, the newly developed Carbon Nanotube Integrative Samplers for monitoring “CNIS-labile” silver and Diffusive Gradient in Thin Film samplers for monitoring “DGT-labile” silver. Results from these passive samplers indicated that the concentrations of silver at the two sites were either below detection limits or were in the ng/L range. In laboratory experiments where the sediments were re-suspended in Milli-Q water, a small proportion of the silver (i.e., <?25%) was labile and partitioned as colloidal or dissolved silver into the liquid phase after agitation. Nanoparticles tentatively identified as silver nanoparticles were detected by single-particle ICP-MS in suspension after agitation of both suspended and bottom sediments. Therefore, there is a need to assess whether silver species, including silver nanoparticles are transported from wastewater treatment plants into sediments in the aquatic environment. This study is unique in focusing on the in situ distribution of silver in natural waters and in sediments that are potentially impacted by urban sources of nanoparticles.     

Spatial distribution characteristics of soil organic carbon in subtropical forests of mountain Lushan,China

The study on the spatial distribution of forest soil organic carbon (SOC) is of great significance for accurate assessment of carbon storage in forest ecosystems. In the present study, by taking eight kinds of forest soils of Mountain Lushan in the subtropical area as the research object, we studied the spatial distribution characteristics of SOC in this mountainous area. The results showed that the SOC content and SOC density (SOCD) of main forest types in the Mountain Lushan were lower than the national and the world average. The soil layer of Lushan forest was thinner, and the SOC and active SOC (ASOC) contents of different forest types and SOCDs are the highest in the surface soil. SOCD of the topsoil accounts for 32.64–54.03% of the total SOCD in the whole soil profile. Surface litter is an important source of SOC, and the different vegetation types are the important reason for the different spatial distribution of SOC in this area. Soil SOC contents in the high-altitude forest (bamboo forest, deciduous broadleaf forest, Pinus taiwanensis forest, evergreen-deciduous forest, and coniferous-broadleaved mixed forest) were higher than those in the low-altitude forest (evergreen broadleaf forest, shrub, and Pinus massoniana forest). However, the difference in SOC content exhibited at the altitude gradient is significantly lower than that in SOC in the soil profile. This indicates that both soil depth and elevation are the important factors that affected SOC distribution. However, the influence of soil depth on spatial distribution of SOC may be more complex than that of altitude. Vegetation types and soil properties are the main reasons for the large differences of reduction rate in the contents of SOC and ASOC.     

Static and Dynamic Behavior of Fibrous Polymeric Composite Materials at Different Environmental Conditions

The study of static and dynamic behavior of environmentally conditioned fibre reinforced polymeric (FRP) composites is necessary and crucial to examine the durability, reliability and sustainability of these noble materials. FRP composites are being used all around the globe and substituting the conventional materials, starting from mini toys to large aerospace components. Present review has introduced to accumulate and understand the disseminate literature in concentrating the significance of understanding the static and dynamic behavior of FRPs with changing environmental conditionings (hygrothermal, low and high temperature, salt solution, freeze thaw, UV light) and with the interaction of different nano-fillers. Their stability and integrity in diverse service environments may be reformed by their reactions against different nature of loadings i.e. static or dynamic and the components such as fibre, matrix and fibre/matrix interfaces in those environments. The static and dynamic states of loading may come with a possible weaker region to encounter the durability and integrity of the composites. To understand the exact failure modes that correlates the position of environmentally conditioned interfaces and dynamic state of loadings, thus confusing the estimation of its overall performance and mechanical behavior. Interface reliability and durability is vital since in-service environments the degradation in the interfacial region leads to complete composite failure. Therefore, the study of combined effects of various in-service environmental conditions and the role of static and dynamic behavior on the interface will be a crucial part related to the multiaxial dynamic states of failures occurring in FRP’s.     

Environmental pollution in Africa

Mining and minerals industries are fast-growing, but at the same time, they have gained more attention due to their impacts over the environment and society. This research aims to provide new insights into the topic of perception and awareness toward sustainability in industrial mining in Brazil. The work included in-depth interviews with a set of companies’ managers/directors focusing in particular on aspects related to the social and environmental dimensions, including communication and relationship with the community, impact assessment and mitigation strategies. The knowledge and use of for formal indicators was also evaluated and analyzed through the proposed Model for Sustainability Assessment of Mining (SAoM model), which was applied to all participating companies. The results put in evidence the existing gap between large and small companies, with these last ones showing lower awareness for the impacts of their activities. The lack of community engagement and of local stakeholders’ involvement, as well as the disregard for actions to mitigate their environmental and social impacts, is the main challenges to be overcome by this sector. The sector has then a long path to go toward sustainability and an active involvement of public institutions is required to allow for its development without compromising locals welfare.     

Making spatial development scenario for south of Bushehr province,Iran, based on strategic foresight

In recent years, the science of foresight has been entered into planning activities by urban and regional planners and this science has impacted on planning activities. This study discusses spatial development in the south of Bushehr province using the foresight approach. The general aim of this research is to compile scenarios for the development of the mentioned study area which comprises the southern part of Bushehr province including four counties of Dayyer, Jam, Kangan and Asaluyeh. The main reason for selecting this region is their direct impressibility by major changes in the country’s oil and gas industry. This research has extremely made use of the Delphi and cross-impact analysis methods to develop foresight scenarios. Using the Delphi method, 30 initial factors were identified in the economic, political-security, linkages, science and technology, manufacturing, natural, social, infrastructural and residential issues and then the cross-impact matrix was used to investigate the impact of factors on each other. In the next step, the ranking of direct and indirect factors was determined by Micmac software and on this basis, the final refining in the selection of drivers was done. In the final stage, axes of future scenarios were presented and then the future scenarios were drawn. Results of this research indicate that two main drivers namely Iran’s international relations and energy resources are the main axes of scenarios. These two drivers have more uncertainty and higher importance than other factors and the results in four scenarios showing the possibility of each situation’s occurrence.     

Effects of meteorology on ground-level ozone (GLO) concentrations and identifying the hot spots having significantly higher GLO concentration in a semi-urban area

The present study aims to analyse the influences of five meteorological parameters (temperature, wind speed, barometric pressure, rainfall, and solar radiations) on ground-level ozone (GLO) concentrations over the region of Ranchi Municipal Corporation (Jharkhand, India). The diurnal variation of GLO concentration and the meteorological parameters were analysed in each month to understand the associations. The results indicated that the correlation coefficients of GLO concentration with SR, AT, and DPT are found to be positive in each month and also statistically significant. But, the association between WS and GLO concentration was not uniform between the study days. Furthermore, the study also demonstrates an approach for identifying the hot spots that are having the higher level of GLO concentration. The hot spot maps were produced for each month to understand the shifting of the locations of hot spot locations. The results reveal that the hot spot locations are changes frequently in each case. Since the hot spot analysis was conducted with limited data, the presented hot spots are indicative and dependent on the meteorological conditions of the specific period and cannot be considered as a robust epidemiological study.     

Traffic and outdoor air pollution levels near highways in Baghdad,Iraq

In Iraq, the number of passenger cars, trucks and buses, local generators, and heavy construction equipment rose to a considerable extent since 2003, causing high environmental problems. Many types of pollutants were monitored and recorded for 24 h during March 2016. The study attempts to explore and establish a relationship between the volume of activity and the movement of motor vehicles of various compounds and contaminants resulting from their exhaust pipes, such as sulfur dioxide, particulate matters, oxides of nitrogen, VOCs, and unburned hydrocarbons. The study focused in and around Mohammad Al-Qasim highway adjacent to the University of Technology, Baghdad. The results showed the need for urgent treatments addressed by the environmental authorities in the city. The study results demonstrated that these contaminants are increased during periods of the beginning and end of working hours for government departments. Some types of sulfur compounds (H₂S and SO₂) concentrations were at serious health-threatening levels, which is a result of the high sulfur content in the Iraqi fuel. The concentrations of NOx and VOC were high, also, which could make the studied area vulnerable to the risk of smog formation. The Iraqi government should make greater efforts to protect the environment and human in this country from the transportation pollution risks.     

Energy–growth nexus revisited: an empirical application on transition countries

This study investigates the energy–growth nexus for transition countries analysing Granger causality between GDP growth per capita and energy use per capita. For this purpose, 17 countries located at Central and Eastern Europe and Caucasian region are chosen and a panel dataset consisting of these countries for the available period of 1990–2011 is studied. In the study, Granger causality is investigated using bootstrapped panel causality approach proposed by Konya (Econ Modell 23(6):978–992, 2006). The approach gives consistent results in case of cross-sectional dependency and heterogeneity of slope coefficients between countries. Causality is examined for two scenarios: one with a trend and one without a trend. The results reveal that, in general, there is no causality running between energy consumption and economic growth, yet there is causality running from energy consumption to economic growth for some countries and sign of the relationship is always negative. Therefore, increases in energy consumption harm economic growth.     

Assessing groundwater quality and its sustainability in Joypurhat district of Bangladesh using GIS and multivariate statistical approaches

Sustainable groundwater quality is a key global concern and has become a major issue of disquiets in most parts of the world including Bangladesh. Hence, the assessment of groundwater quality is an important study to ensure its sustainability for various uses. In this study, a combination of multivariate statistics, geographical information system (GIS) and geochemical approaches was employed to evaluate the groundwater quality and its sustainability in Joypurhat district of Bangladesh. The results showed that the groundwater samples are mainly Ca–Mg–HCO₃ type. Principal component analysis (PCA) results revealed that geogenic sources (rock weathering and cation exchange) followed by anthropogenic activities (domestic sewage and agro-chemicals) were the major factors governing the groundwater quality of the study area. Furthermore, the results of PCA are validated using the cluster analysis and correlation matrix analysis. Based on the groundwater quality index (GWQI), it is found that all the groundwater samples belong to excellent to good water quality domains for human consumption, although iron, fluoride and iodide contaminated to the groundwater, which do not pose any significant health hazard according to World Health Organization’s and Bangladesh’s guideline values. The results of irrigation water quality index including sodium adsorption ratio (SAR), permeability index and sodium percentage (Na %) suggested that most of the groundwater samples are good quality water for agricultural uses. The spatial distribution of the measured values of GWQI, SAR, Fe (iron), EC (electrical conductivity) and TH (total hardness) were spatially mapped using the GIS tool in the study area.