Cellulose and Nanocellulose from Maize Straw: An Insight on the Crystal Properties

In this work cellulose was extracted from corn/maize straw (Zea mays) by means of an environmental-friendly multistep procedure involving alkaline treatment and a totally chlorine-free bleaching. This multistep procedure efficiently removed lignin and hemicelluloses. The pulp resulting from each step was characterized by attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR). The optimum pulping time (time of alkaline treatment) was determined by means of thermogravimetric analysis. The extracted cellulose is highly crystalline as verified by X-ray diffraction. The partial acid hydrolysis with sulfuric acid led to the isolation of cellulose whiskers in aqueous suspension as confirmed by light scattering and transmission electron microscopy. The depolarization ratio value of these nanocrystals is the same as that determined for cotton whiskers, showing that this ratio does not depend on the cellulose source. The maize whiskers are arranged laterally in bundles with average thickness around five times that of the crystallite.     

Abundances and variability of tropospheric volatile organic compounds at the South Pole and other Antarctic locations

Multiyear (2000–2006) seasonal measurements of carbon monoxide, hydrocarbons, halogenated species, dimethyl sulfide, carbonyl sulfide and C₁–C₄ alkyl nitrates at the South Pole are presented for the first time. At the South Pole, short-lived species (such as the alkenes) typically were not observed above their limits of detection because of long transit times from source regions. Peak mixing ratios of the longer lived species with anthropogenic sources were measured in late winter (August and September) with decreasing mixing ratios throughout the spring. In comparison, compounds with a strong oceanic source, such as bromoform and methyl iodide, had peak mixing ratios earlier in the winter (June and July) because of decreased oceanic production during the winter months. Dimethyl sulfide (DMS), which is also oceanically emitted but has a short lifetime, was rarely measured above 5 pptv. This is in contrast to high DMS mixing ratios at coastal locations and shows the importance of photochemical removal during transport to the pole. Alkyl nitrate mixing ratios peaked during April and then decreased throughout the winter. The dominant source of the alkyl nitrates in the region is believed to be oceanic emissions rather than photochemical production due to low alkane levels.Sampling of other tropospheric environments via a Twin Otter aircraft included the west coast of the Ross Sea and large stretches of the Antarctic Plateau. In the coastal atmosphere, a vertical gradient was found with the highest mixing ratios of marine emitted compounds at low altitudes. Conversely, for anthropogenically produced species the highest mixing ratios were measured at the highest altitudes, suggesting long-range transport to the continent. Flights flown through the plume of Mount Erebus, an active volcano, revealed that both carbon monoxide and carbonyl sulfide are emitted with an OCS/CO molar ratio of 3.3 × 10^?3 consistent with direct observations by other investigators within the crater rim.     

Distribution of the herbicide atrazine in a microcosm with riparian forest plants

Pesticides applied on sugarcane reach the subsoil of riparian forests and probably contaminate the river water. This work was conducted to learn about the phytoremediation of atrazine and subsoil contamination using the common riparian forest species of Cecropia hololeuca Miq. and Trema micranta (L.) Blum. These plants were grown in soil microcosms where ¹⁴C-atrazine at 1/10 of the field-recommended dose was applied at the bottom of the microcosm simulating the movement from contaminated ground water to the upper soil layers and into plants. Residues of ¹⁴C-atrazine were detected in all parts of the microcosm including soil, rhizosphere and the roots in different layers of the microcosm, stem and leaves. Atrazine mineralization was higher (10.2%) in the microcosms with plants than the control microcosms without plants (1.2%). The upward movement of this pesticide from deeper to more superficial soil layers occurred in all the microcosms with plants, powered by evapotranspiration process. From the atrazine applied in this study about 45% was taken up by C. hololeuca and 35% by T. micrantha. The highest amount of radioactivity (%) was found in the fine roots and the specific radioactivity (% g^?1) showed that thick, fine roots and leaves bioaccumulate atrazine. The enhanced mineralization of atrazine as well the phytostabilization effect of the tree biomass will reduce the bioavailability of these residues and consequently decrease the hazardous effects on the environment.     

Arsenic concentration and speciation in five freshwater fish species from Back Bay near Yellowknife, NT, CANADA

The concentration of total arsenic and five different arsenic species [As(III), As(V), monomethylarsonic acid (MMA), dimethylarsenic acid (DMA), and arsenobetaine (AsB)], were measured in the muscle, liver and gastrointestinal tract (GIT) of five different fish species [lake whitefish (Coregonus clupeaformis), walleye (Stizostedion vitreum), northern pike (Esox lucius), white sucker (Catostomus commersoni) and longnose sucker (Catostomus catostomus)] from Back Bay, Great Slave Lake, near the city of Yellowknife, NT, Canada. The total concentration (dry weight) of arsenic in muscle ranged from 0.57 to 1.15 mg/kg, in the liver from 0.42 to 2.52 mg/kg and in the GIT from 1.48 to 8.92 mg/kg. Among fish species, C. commersoni had significantly higher total arsenic concentrations in the GIT than S. vitreum, E. lucius and C. clupeaformis, and higher total arsenic concentrations in the liver than C. clupeaformis. The mean concentration of As(III) and As(V) in the muscle of all fish ranged from < or =0.01 to 0.05 mg/kg and < or =0.01 to 0.02 mg/kg, respectively, and together comprised < or =7.5% of the total arsenic measured in muscle. The concentrations of MMA were below detection in the muscle of all five fish species. However, AsB and DMA were measured in all fish species and nearly all fish tissues. The concentrations of AsB ranged from 0.01 to 0.13 mg/kg and the concentrations of DMA ranged from <0.02 to 0.45 mg/kg. The majority (>50%) of organic arsenic in almost all of the tissues from fish caught in Back Bay was not directly identified. Evidence from the literature suggests that most of these other organic arsenic species were likely trimethylated arsenic compounds, however, further analytical work would need to be performed to verify this hypothesis.     

Dynamics of metal adaptation in riverine chironomids

The ability of the non-biting midge Chironomus riparius to survive and reproduce in metal polluted lowland rivers facilitates the opportunity to study micro-evolutionary processes in situ. However, due to larval drift, adapted midge populations are subject to regular immigration of non-adapted specimens from clean upstream river reaches. To examine the influence of non-adapted genes in adapted midge populations on the level of metal adaptation, an upstream and downstream chironomid population were crossbred on eight separate occasions in the laboratory to mimic gene flow. Several life-history characteristics, indicating adaptation to metals, were followed seasonally in the parental strains as well as in the reciprocal crossings. Such crossings were done over a 14-month period and maternal effects were found to be absent, indicating a major genetic component for the increased metal tolerance in the exposed midge populations. Furthermore, results confirmed the presence of adaptation to metals in exposed chironomids. However, a rapid loss of metal adaptation in the first generation hybrid offspring was clearly demonstrated. Consequently, the large temporal variation in metal adaptation in midge populations from the river can be explained by the earlier reported seasonal variations in selection pressure and immigration rates from non-adapted sub-populations.     

Experience with the use of LCA-modelling (EASEWASTE) in waste management.

Life-cycle assessment (LCA) models are becoming the principal decision support tools of waste management systems. This paper describes our experience with the use of EASEWASTE (Environmental Assessment of Solid Waste Systems and Technologies), a new computerized LCA-based model for integrated waste management. Our findings provide a quantitative understanding of waste management systems and may reveal consistent approaches to improve their environmental performances. EASEWASTE provides a versatile system modelling facility combined with a complete life-cycle impact assessment and in addition to the traditional impact categories addresses toxicity-related categories. New categories dealing with stored ecotoxicity and spoiled groundwater resources have been introduced. EASEWASTE has been applied in several studies, including full-scale assessments of waste management in Danish municipalities. These studies led to numerous modelling issues: the need of combining process-specific and input-specific emissions, the choice of a meaningful time horizon, the way of accounting for biological carbon emissions, the problem of stored ecotoxicity and aspects of crediting the waste management system with the savings inherent in avoided production of energy and materials. Interpretation of results showed that waste management systems can be designed in an environmentally sustainable manner where energy recovery processes lead to substantial avoidance of emissions and savings of resources.     

Evaluating mortality rates with a novel integrated framework for nonmonogamous species

The conservation of wildlife requires management based on quantitative evidence, and especially for large carnivores, unraveling cause‐specific mortalities and understanding their impact on population dynamics is crucial. Acquiring this knowledge is challenging because it is difficult to obtain robust long‐term data sets on endangered populations and, usually, data are collected through diverse sampling strategies. Integrated population models (IPMs) offer a way to integrate data generated through different processes. However, IPMs are female‐based models that cannot account for mate availability, and this feature limits their applicability to monogamous species only. We extended classical IPMs to a two‐sex framework that allows investigation of population dynamics and quantification of cause‐specific mortality rates in nonmonogamous species. We illustrated our approach by simultaneously modeling different types of data from a reintroduced, unhunted brown bear (Ursus arctos) population living in an area with a dense human population. In a population mainly driven by adult survival, we estimated that on average 11% of cubs and 61% of adults died from human‐related causes. Although the population is currently not at risk, adult survival and thus population dynamics are driven by anthropogenic mortality. Given the recent increase of human‐bear conflicts in the area, removal of individuals for management purposes and through poaching may increase, reversing the positive population growth rate. Our approach can be generalized to other species affected by cause‐specific mortality and will be useful to inform conservation decisions for other nonmonogamous species, such as most large carnivores, for which data are scarce and diverse and thus data integration is highly desirable.     

Agricultural waste as household fuel: Techno-economic assessment of a new rice-husk cookstove for developing countries

In many rural contexts of the developing world, agricultural residues and the organic fraction of waste are often burned in open-air to clear the lands or just to dispose them. This is a common practice which generates uncontrolled emissions, while wasting a potential energy resource. This is the case of rice husk in the Logone Valley (Chad/Cameroon). In such a context household energy supply is a further critical issue. Modern liquid fuel use is limited and traditional solid fuels (mainly wood) are used for daily cooking in rudimentary devices like 3-stone fires, resulting in low efficiency fuel use, huge health impacts, increasing exploitation stress for the local natural resources. Rice husk may be an alternative fuel to wood for household energy supply. In order to recover such a biomass, the authors are testing a proper stove with an original design. Its lay-out (featuring a metal-net basket to contain the fuel and a chimney to force a natural air draft) allows a mix of combustion/gasification of the biomass occurring in a completely burning fire, appropriate for cooking tasks. According to results obtained with rigorous test protocols (Water Boiling Test), different lay-outs have been designed to improve the performance of the stove. Technical and economic issues have been addressed in the development of such a model; building materials have been chosen in order to guarantee a cost as low as possible, using locally available items. The feasibility of the introduction of the stove in the studied context was assessed through an economic model that keeps into account not only the technology and fuel costs, but also the energy performance. According to the model, the threshold for the trade-off of the stove is the use of rice husk to cover 10–15% of the household energy needs both with traditional fireplaces or with improved efficiency cookstoves. The use of the technology proposed in combination with improved woodstove would provide householders with an appropriate and convenient cooking technology portfolio, increasing the opportunities of choice of the preferred energy system for the user and allowing significant savings for the family budget (up to 50% of the total annual cooking energy expenditure). The proposed model may be used also as a tool for the evaluation of the affordability or for the comparison of different cooking technologies also in other similar contexts, given their specific techno-economic parameter values.     

Untersuchungen zur Eignung wildlebender Wanderratten (Rattus norvegicus) als Indikatoren der Schwermetallbelastung

Depot compartments which are the primary sites of pollutant enrichment in the organism can be used as bioindicators (targets) in order to identify a burden for certain elements. Background concentrations of eleven elements in tissues and organs of wild-living rats (Rattus norvegicus) obtained from a region (Euroregion Neisse, around the trilateral border region of Germany, Poland and the Czech Republic) distinguished by low to intermediate levels of environmental contaminations are given in part I of this work. In order to identify the most important depot compartments for certain elements, a body burden method was applied. Differences of affinity due to sex and age of analyzed rats are discussed, as are the suitability of specific organs and tissues with regard to bioaccumulation measurements concerning metals. The principal depot compartments for the heavy metals Cu, Mn, Cd (in adult rats) and Tl are the liver and kidneys, whereas the elements Ni, Sr, Pb (for adult animals) and Ti are more affinitivly to bones. Co and Zn displayed a more pronounced affinity towards tissues of the bones and liver. The analysis revealed large differences in Cd and Pb distributions both among young and adult rats, and with respect to sexes. It can be concluded that the distribution of the elements investigated in this study in free-living rats agrees with that in man, except for that of Ni. The above agreement gives proof of the possibility to use depot organs of rats for bioindication which was already mentioned in part I of this work (‘Sex and age-related quantification of Al, As, Cd, Co, Cu, Mn, Ni, Pb, Sr, Ti, Tl and Zn in liver, heart, lung, kidney, muscle, brain and bones and establishment of distribution patterns’).     

Autotrophic nitrogen removal for decentralized treatment of ammonia-rich industrial textile wastewater: process assessment,stabilization and modelling

Environmental Science and Pollution Research - Digital textile printing (DTP) is a game-changer technology that is rapidly expanding worldwide. On the other hand, process wastewater is rich in...