Arsenic content in ground and canal waters of Punjab, North-West India

Groundwater is the primary source of drinking water for more than 95% of the population in Punjab. The world health organization and US Environment Protection Agency recently established a new maximum contaminant level of 10 ppb for arsenic in drinking water. The arsenic concentration of deep water tube wells located in Amritsar city used for domestic supply for urban population ranged from 3.8 to 19.1 ppb with mean value of 9.8 ppb. Arsenic content in hand pump water varied from 9 to 85 ppb with a mean value of 29.5 ppb. According to the safe limit of As, 54% and 97%, water samples collected from deep water tube wells and hand pumps, respectively, were not fit for human consumption. Arsenic content in canal water varied from 0.3 to 8.8 ppb with a mean value of 2.89 ppb. Canal water has got higher oxidation potential followed by deep tube well and hand pump water. The present study suggests the regular monitoring of arsenic content in deep tube well and shallow hand pump waters by water testing laboratories. The consumption of water having elevated concentration of As above the safe limit must be discouraged. In south-western districts of Punjab, it recommends the use of canal water for drinking purposes and domestic use by rural and urban populations than ground water sources.     

Post tsunami changes in soil properties of Andaman Islands, India

A post tsunami study was conducted to assess the changes in soil properties in the Andaman Island, in India. The present study reported tsunami led conversion of acid soils to saline acid soils and acid sodic soils to acid saline sodic soils in the areas South Andaman inundated during tsunami and permanently receded later and in the low-lying area submerged during high tides. Upon intense leaching acid saline soils and acid saline sodic may further develop typical characteristics of acidic soils and acidic sodic soil, respectively. The soil at Guptapara inundated almost due to tsunami with minimal pyrite oxidation has potential to develop into highly acidic soils upon drainage. The tsunami by and large has modified some depositional layer affecting the salt accumulation to a greater extent and iron to a lesser extent and least to sodicity.     

Assessment and spatial distribution of groundwater quality in industrial areas of Ghaziabad, India

An attempt has been made in this study to evaluate the groundwater quality in two industrial blocks of Ghaziabad district. Groundwater samples were collected from shallow wells, deep wells and hand pumps of two heavily industrialized blocks, namely Bulandshahar road industrial area and Meerut road industrial area in Ghaziabad district for assessing their suitability for various uses. Samples were collected from 30 sites in each block before and after monsoon. They were analyzed for a total of 23 elements, namely, Ag, Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Se, U, V, and Zn. In addition to these elements, some other parameters were also studied viz: color, odor, turbidity, biological oxygen demand, chemical oxygen demand (COD), dissolved oxygen, total dissolved solids and total suspended solid. The water quality index was also calculated based on some of the parameters estimated. Out of the 23 elements, the mean values of 12 elements, namely, Al, As, Ca, Cd, Cr, Mg, Mn, Na, Ni, Pb, Se, and U, were higher than the prescribed standard limits. The concentrations (in milligram per liter) of highly toxic metals viz., Al, As, Cd, Cr, Ni, Pb, Se, and U, ranged from 1.33–6.30, 0.04–0.54, 0.005–0.013, 4.51–7.09, 0.14–0.27, 0.13–0.32, 0.16–2.11, and 0.10–1.21, respectively, in all groundwater samples, while the permissible limits of these elements as per WHO/BIS standards for drinking are 0.2, 0.01, 0.003, 0.05, 0.07, 0.01, 0.04, and 0.03 mg L^?1, respectively. The EC, pH, and COD in all samples varied from 0.74–4.21, 6.05–7.72, and 4.5–20.0 while their permissible limits are 0.7 dS m^?1, 6.5–8.5, and 10 mg L^?1, respectively. On the basis of the above-mentioned parameters, the water quality index of all groundwater samples ranged from 101 to 491, and 871 to 2904 with mean value of 265 and 1,174 based on two criteria, i.e., physico-chemical and metal contaminations, respectively while the prescribed safe limit for drinking is below 50. The results revealed that the groundwater in the two blocks is unfit for drinking as per WHO/BIS guidelines. The presence of elements like As, Se, and U in toxic amounts is a matter of serious concern.     

Trace metal fractionation in the Pichavaram mangrove–estuarine sediments in southeast India after the tsunami of 2004

The geochemistry of coastal sediments of southern India was altered after the tsunami in 2004. A five-step sequential extraction procedure was applied to assess the effects of tsunami on mobility and redistribution of selected elements (Cd, Cr, Cu, Fe, Mn, Ni, Pb, and Zn). Ten surface sediments and three cores were analyzed for different metal fractions (exchangeable, carbonate, reduced, oxidized, and residual). Total metal concentrations increased in mangrove sediments after the tsunami, but their spatial distribution did not show significant variation (except Mn). The sediments were mixed by the tsunami, and there was lack of variation in metal concentrations in different fractions with depth (except Pb and Mn). High concentrations of Pb and Zn occurred in the oxide fractions, whereas Cu, Cr, Cd, and Ni were high in the organic and sulfide-rich fractions. Metals in the residual fraction (lattice bound) had the highest concentration suggesting their non-availability and limited biological uptake in the system. Most of the metals (except Mn) do not constitute a risk based on the different geochemical indices.     

Effect of light on DIMBOA synthesis in maize leaves as revealed by modified cost-effective extraction method

2,4-Dihydroxy-7-methoxy-1,4-benzoxazine-3-one (DIMBOA) known for its antibiotic properties against many pests and diseases in maize plant was extracted from different varieties. In one of the extraction methods of DIMBOA from maize leaves, Amberlite XAD7, an adsorbent, was used for extracting this and it gave a pure fraction containing DIMBOA. The adsorbent Amberlite XAD, being an expensive material, was uneconomical for processing a large number of samples. Therefore, one of the reported solvent extraction method was modified to make the extraction procedure cost effective without losing the target compounds. Using the modified method, DIMBOA was extracted for different varieties under dark and light condition. Results showed that high concentrations of DIMBOA were extracted from plants grown in dark condition as compared to plants grown in light indicating that light played significant role in inhibition of DIMBOA.     

Urinary fluoride as a monitoring tool for assessing successful intervention in the provision of safe drinking water supply in five fluoride-affected villages in Dhar district, Madhya Pradesh, India

Endemic fluorosis was detected in 31 villages in the Dhar district of Madhya Pradesh, Central India. Out of the 109 drinking water sources that were analyzed, about 67 % were found to contain high concentration of fluoride above the permissible level of 1.0 mg/l. Dental fluorosis among the primary school children in the age between 8 and 15 served as primary indicator for fluoride intoxication among the children. Urinary fluoride levels among the adults were found to be correlated with drinking water fluoride in 10 villages affected by fluoride. Intervention in the form of alternate safe water supply in five villages showed significant reduction in the urinary fluoride concentration when compared to the control village. Urinary fluoride serves as an excellent marker for assessing the effectiveness of intervention program in the fluoride-affected villages.     

Levels and distribution of persistent organochlorine pesticide residues in water and sediments of Gomti River (India)—a tributary of the Ganges River

This study reports the concentration levels and distribution pattern of the persistent organochlorine pesticide (OCPs) residues in the water and bed-sediments of the Gomti River collected seasonally over a period of 2 years. The water and bed-sediment samples were collected from eight different sites and analyzed for aldrin, dieldrin, endrin, HCB, HCH isomers, DDT isomers/metabolites, endosulfan isomers (alpha and beta), endosulfan sulfate, heptachlor and its metabolites, alpha-chlordane, gamma-chlordane and methoxychlor. In the river water and sediments SigmaOCPs residues ranged between 2.16 and 567.49 ng l(-1) and 0.92 and 813.59 ng g(-1), respectively. The results, further, suggested that source of DDT contamination is from the aged and weathered agricultural soils with signature of recently used DDT in the river catchments. To assess any adverse effect of OCPs contamination on river's biological component, the threshold effect level (TEL) was used. The results revealed that bed-sediments of the Gomti River are contaminated with lindane, endrin, heptachlor epoxides and DDT, particularly at site-4 and may contribute to sediment toxicity in the freshwater ecosystem of the river.     

Trace element concentration in groundwater of Pesarlanka Island, Krishna Delta, India

There is a growing concern over the potential accumulation of trace element concentration in groundwater of coastal aquifer owing seawater encroachment in the last several decades. A total of 29 groundwater samples collected from Pesarlanka Island, Krishna delta, Andhra Pradesh, India were analyzed for 13 trace elements (B, V, Mn, Fe, Ni, Co, Cu, Zn, As, Sr, Cd, Ba, and Pb) using inductively coupled plasma mass spectrometry. The results reveal that B, Fe, Ni, As, Sr, and Pb vary from 11.22 to 710.2, 1.25 to 684.6, 0.02 to 37.33, 27.8 to 282.3, 164.1 to 7,009, and 1.97 to 164.4 μg/l, respectively. Ba, Cd, Co, Cu, Ni, V, and Zn are almost within permissible limits for drinking water, but As, Fe, Mn, Pb, B, and Sr are above the permissible limit. The toxic element Pb is 1.64 times more than the maximum permissible limits of drinking water. The minimum value of As is also 2.78 times more, whereas the maximum is 28.2 times the permissible limit. The spatial distributions of alkaline earths (Sr, Ba), transition metals (V, Co, Ni, Fe), metallic elements (Cu, Pb), and (As) were found in considerable variation in the entire Island. Good cross-correlations were found between As, B, Co, and Sr with total dissolved solids and among other trace elements such as B, As, Co, and Sr. The variability observed within the groundwater samples is closely connected to the sea spray input; hence, it is primarily a consequence of geographical and meteorological factors, such as distance from the ocean and time of year. The trace element levels, in particular those of heavy metals, are very low, suggesting an origin from natural sources rather than from anthropogenic contamination. A few trace elements (Sr and B) are found as sensitive parameters responding to changes in fresh to saline groundwater environment. The highly elevated trace elements in this area which may be attributed to marine sediments or death and decay of plants are presented in this paper.     

Effect of process conditions on the analysis of free and conjugated estrogen hormones by solid-phase extraction–gas chromatography/mass spectrometry (SPE–GC/MS)

Simultaneous analysis of 11 free estrogen hormones and five conjugated estrogens in water and municipal wastewater was studied. The analytical method was developed and tested for different types of solid-phase extraction adsorbents, eluents, sample containers and storage conditions, derivatization, and matrix effects. Varian Bond Elut C-18 solid-phase extraction adsorbent cartridge was selected based on its high recoveries for both free and conjugated estrogens. Sample storage conditions, as well as selection and pretreatment of sample container materials, can affect the trace level analysis of estrogens. Silanization of glassware is observed to provide low relative standard deviation (RSD) in the analysis and less percentage loss due to contacting with sample container materials. Light exposure during the test can significantly impact the results. The derivatized samples stored at −20°C for at least 6 days showed less than 10.5% average RSD in the analysis. The recovery efficiency in clean water varies from 72% to 101% for free estrogens and 78% to 82% for conjugated estrogens. The method detection limits (MDL) for most of the compounds range from 30 to 870 ng/L using a sample volume of 200 mL. With a sample volume of 3 L, the most sensitive compound produces a MDL of 0.03 ng/L. Dilute methanol is used to wash the loaded cartridge as a cleanup step in order to remove interfering species during analysis of wastewater samples. Using the optimized analytical methods, the concentration level of free estrogens in the influent and effluent municipal wastewaters is tested.     

An Improved Rating System for Assessing Surface Water Contamination Potential from MSW Landfills

Leachate emission from uncontrolled municipal solid waste landfills (referred to as waste sites in the present study) is a major threat to the environment and living beings in its vicinity. Surface water contamination potential resulting from leachate may be used as one of the criteria for prioritization of sites for remediation purposes. The existing hazard rating systems that prioritize waste sites considering surface water contamination potential as one of the criteria are mainly suited for the developed countries where these were developed initially. In developing countries like India, the set of conditions differ from those in developed countries, and therefore the existing systems may not be suitable for developing countries. Thus in the present study, an improved system is proposed to assess surface water contamination potential from MSW sites. The system is based on the concept of Source, Pathway and Receptor. The proposed system employs parameters derived from the review of existing rating systems and selects their best and worst values based on literature review, design standards and field conditions. The importance weights of the system parameters have been decided based on expert judgment using Delphi technique. Sensitivity analysis of the system shows that the improved system is more sensitive than the existing systems for the site conditions encountered in developing countries. Monte Carlo analysis of the proposed system confirms the spread of the scores obtained from the system over the full scale of 0–1000. The improved system is compared with existing systems by applying it to waste sites from metropolitan cities of India and performing clustering analysis on the rating scores. The clustering analysis shows that the rating scores from the improved system are less clustered as compared to the scores from the existing systems. This demonstrates that the improved system makes a better tool to distinctly prioritize the waste sites for remediation purpose.