Spatial distribution and partitioning of polychlorinated biphenyl and organochlorine pesticide in water and sediment from Sarno River and Estuary,Southern Italy

The Sarno River is nicknamed “the most polluted river in Europe”. The main goal of this study is to enhance our knowledge on the Sarno River water and sediment quality and on its environmental impact on the gulf of Naples (Tyrrhenian Sea, Central Mediterranean Sea) in order to become a useful assessment tool for the regional administrations. For these reasons, 32 selected polychlorinated biphenyls (PCBs) and aldrin, α-BHC, β-BHC, δ-BHC, γ-BHC (lindane), 4,4′-DDD, 4,4′-DDE, 4,4′-DDT, dieldrin, endosulfan I, endosulfan II, endosulfan sulphate, endrin, endrin aldehyde, heptachlor, heptachlor epoxide (isomer B) and methoxychlor were determined in the water dissolved phase (DP), suspended particulate matter (SPM) and sediments. Total concentrations of PCBs ranged from 1.4 to 24.9 ng L^?1 in water (sum of DP and SPM) and from 1.01 to 42.54 ng g^?1 in sediment samples. The concentrations of total organochlorine pesticides (OCPs) obtained in water (sum of DP and SPM) ranged from 0.54 to 7.32 ng L^?1 and from 0.08 to 5.99 ng g^?1 in sediment samples. Contaminant discharges of PCBs and OCPs into the sea were calculated in about 1,247 g day^?1 (948 g day^?1 of PCBs and 326 g day^?1 of OCPs), showing that this river should account as one of the main contribution sources of PCBs and OCPs to the Tyrrhenian Sea.     

Degradation of caffeine by conductive diamond electrochemical oxidation

The use of Conductive-Diamond Electrochemical Oxidation (CDEO) and Sonoelectrochemical Oxidation (CDSEO) has been evaluated for the removal of caffeine of wastewater. Effects of initial concentration, current density and supporting electrolyte on the process efficiency are assessed. Results show that caffeine is very efficiently removed with CDEO and that depletion of caffeine has two stages depending on its concentration. At low concentrations, opposite to what it is expected in a mass-transfer controlled process, the efficiency increases with current density very significantly, suggesting a very important role of mediated oxidation processes on the removal of caffeine. In addition, the removal of caffeine is faster than TOC, indicating the formation of reaction intermediates. The number and relative abundance of them depend on the operating conditions and supporting electrolyte used. In chloride media, removal of caffeine is faster and more efficiently, although the occurrence of more intermediates takes place. CDSEO does not increase the efficiency of caffeine removal, but it affects to the formation of intermediates. A detailed characterization of intermediates by liquid chromatography time-of-flight mass spectrometry seems to indicate that the degradation of caffeine by CDEO follows an oxidation pathway similar to mechanism proposed by other advanced oxidation processes.     

Haneş and Valea Vinului (Romania) closed mines Acid Mine Drainages (AMDs) – Actual condition and passive treatment remediation proposal

Acid Mine Drainages (AMDs) from Hane? and Valea Vinului (Romania) closed mines were considered for characterization and treatment using a local zeolitic volcanic tuff, ZVT, (M?cica?, Cluj County, Romania). Water samples were collected from two locations, before and after discharging point in case of Hane? mine, and on three horizons in case of Valea Vinului mine. Physico-chemical (pH, total solid, heavy metal ions concentration) analyses showed that the environment is strongly affected by these AMD discharges even if the mines were closed years ago. Iron, manganese and zinc were the main pollutants identified in Hane? mine AMD, while zinc is the one mainly present in case of Valea Vinului AMD. A batch technique (no stirring) in which the ZVT was put in contact with the AMD sample was proposed as a passive remediation technique. ZVT successfully remove heavy metal ion from AMD. According to heavy metal ion concentrations, removal efficiencies are reaching 100%, varying as follows, Fe²⁺ > Zn²⁺ > Mn²⁺. When the ZVT was compared with two cationic resins (strong, SAR and weak acid, WAR) the following series was depicted, SAR > ZVT > WAR.     

Contamination by polychlorinated biphenyls (PCBs) in striped dolphins (Stenella coeruleoalba) from the Southeastern Mediterranean Sea

Concentrations of polychlorinated biphenyls (PCBs) including dioxin-like PCBs (non-ortho, PCB 77, PCB 126, and PCB 169 and mono-ortho, PCB 105, PCB 118, and PCB 156) were measured in different organs and tissues (melon, blubber, liver, kidney, lung, heart, and muscle tissue) of striped dolphins (Stenella coeruleoalba) from the Eastern Mediterranean Sea (Adriatic Sea). The mean highest levels were in blubber and melon, followed by liver, kidney, lung, heart, and muscle tissue. PCB profiles were similar in all tissues and organs being dominated by the higher chlorinated homologues (hexa-CBs, 55.8-62.1%; penta-CBs, 15.4-20.0%; and hepta-CB PCB 180, 12.7-16.5%). Major PCBs in all tissues were congeners 138 and 153 collectively accounting for 50.6-58.3% of the total PCB concentrations, followed by PCB 101, 105, 118, and 180 constituting from 27.0% to 31.0%. PCB levels were higher in adult males than in adult females. The estimated 2,3,7,8-TCDD toxic equivalents of non- and mono-ortho PCBs were much higher than the threshold level above which adverse effects have been observed in other marine mammals species, suggesting that striped dolphins in this region are at risk for toxic effects.     

Association between biotic and abiotic parameters and the occurrence of cyanobacteria in a Brazilian reservoir

The water reservoir of Vargem das Flores, Brazil, has been subject to eutrophication problems. The occurrence of cyanobacterial blooms in this water body has raised concerns regarding the presence of toxic metabolites. In order to understand the factors that promote the proliferation and distribution of cyanobacteria in the reservoir, physicochemical parameters, species composition, and toxicity of the reservoir water column were analyzed at monthly intervals over a 3-year period (2004-2007) using a range of analytical techniques. The results showed that cyanobacteria were absent in the dry period, returning after the onset of stratification. A succession pattern was observed within this group. The Aphanocapsa genus was dominant in the last rainy period of the study (October 2006 to March 2007). However toxicity was only detected when the genera Microcystis and Sphaerocavum were present (October 2005). The principal components analysis showed negative correlation between cyanobacteria and orthophosphate. The change of dominant cyanobacteria along the 3 years of study and the final prevalence of nontoxic genera in the reservoir is an evidence of water quality improvement in response to the management techniques implemented in the reservoir basin.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.     

Toxicity Identification Evaluation (Phase I) of water and sediment samples from a tropical reservoir contaminated with industrial and domestic effluents

The Funil Reservoir (Rio de Janeiro State, Brazil) is an environment degraded by constant discharge of nutrients and pollution coming from the most industrialized region of the country. As a consequence of eutrophication, there are continuous cyanobacteria blooms, which cause acute and chronic toxicity to zooplankton. In this context, Phase I of Toxicity Identification Evaluation (TIE) was performed on Daphnia similis using water and interstitial water from the reservoir, with the aim of identifying classes of compounds responsible for toxicity. The results indicated that water toxicity was due to cyanobacteria resulting from blooms in the reservoir and surfactants. Metals, especially copper, contributed to sediment toxicity. This research is the first attempt to describe the nature of toxicity in this reservoir using this method.     

Aircraft mass budgeting to measure CO2 emissions of Rome,Italy

Aircraft measurements were used to estimate the CO₂ emission rates of the city of Rome, assessed against high-resolution inventorial data. Three experimental flights were made, composed of vertical soundings to measure Planetary Boundary Layer (PBL) properties, and circular horizontal transects at various altitudes around the city area. City level emissions and associated uncertainties were computed by means of mass budgeting techniques, obtaining a positive net CO₂ flux of 14.7?±?4.5, 2.5?±?1.2, and 10.3?±?1.2 μmol m^?2 s^?1 for the three flights. Inventorial CO₂ fluxes at the time of flights were computed by means of spatial and temporal disaggregation of the gross emission inventory, at 10.9?±?2.5, 9.6?±?1.3, and 17.4?±?9.6 μmol m^?2 s^?1. The largest differences between the two dataset are associated with a greater variability of wind speed and direction in the boundary layer during measurements. Uncertainty partitioned into components related to horizontal boundary flows and top surface flow, revealed that the latter dominates total uncertainty in the presence of a wide variability of CO₂ concentration in the free troposphere (up to 7 ppm), while it is a minor term with uniform tropospheric concentrations in the study area (within 2 ppm). Overall, we demonstrate how small aircraft may provide city level emission measurements that may integrate and validate emission inventories. Optimal atmospheric conditions and measurement strategies for the deployment of aircraft experimental flights are finally discussed.     

Extending large-scale forest inventories to assess urban forests

Urban areas are continuously expanding today, extending their influence on an increasingly large proportion of woods and trees located in or nearby urban and urbanizing areas, the so-called urban forests. Although these forests have the potential for significantly improving the quality the urban environment and the well-being of the urban population, data to quantify the extent and characteristics of urban forests are still lacking or fragmentary on a large scale. In this regard, an expansion of the domain of multipurpose forest inventories like National Forest Inventories (NFIs) towards urban forests would be required. To this end, it would be convenient to exploit the same sampling scheme applied in NFIs to assess the basic features of urban forests. This paper considers approximately unbiased estimators of abundance and coverage of urban forests, together with estimators of the corresponding variances, which can be achieved from the first phase of most large-scale forest inventories. A simulation study is carried out in order to check the performance of the considered estimators under various situations involving the spatial distribution of the urban forests over the study area. An application is worked out on the data from the Italian NFI.     

Particle emission from heavy-duty engine fuelled with blended diesel and biodiesel

In this study, particulate matter (PM) were characterized from a place impacted by heavy-duty vehicles (Bus Station) fuelled with diesel/biodiesel fuel blend (B3) in the city of Londrina, Brazil. Sixteen priority polycyclic aromatic hydrocarbons (PAH) concentrations were analyzed in the samples by their association with atmospheric PM, mass size distributions and major ions (fluorite, chloride, bromide, nitrate, phosphate, sulfate, nitrite, oxalate; fumarate, formate, succinate and acetate; lithium, sodium, potassium, magnesium, calcium and ammonium). Results indicate that major ions represented 21.2% particulate matter mass. Nitrate, sulfate, and ammonium, respectively, presented the highest concentration levels, indicating that biodiesel may also be a significant source for these ions, especially nitrate. Dibenzo[a,h]anthracene and indeno[1,2,3,-cd]pyrene were the main PAH found, and a higher fraction of PAH particles was found in diameters lower than 0.25 μm in Londrina bus station. The fine and ultrafine particles were dominant among the PM evaluated, suggesting that biodiesel decreases the total PAH emission. However, it does also increase the fraction of fine and ultrafine particles when compared to diesel.