Identification of degradation products of thiram in water, soil and plants using LC-MS technique

In order to evaluate the deleterious effects of exposure to pesticides on a target population, a comprehensive study on their degradation in the various segments of ecosystem under varying environmental conditions is needed. In view of this, a study has been carried out on the metabolic pathways of thiram, a dithiocarbamate fungicide, in a variety of matrices namely water and soil under controlled conditions and plants in field conditions. The identification of degradation products was carried out in samples collected at various time points using LC-MS. The degradation products identified can be rationalized as originating by a variety of processes like hydrolysis, oxidation, N-dealkylation and cyclization. As a result of these processes the presence of some metabolites like dimethyl dithiocarbamate, bis(dimethyl carbamoyl) disulphide, bis(dimethyl dithiocarbamoyl) trisulphide and N-methyl-amino-dithiocarbamoyl sulphide was observed in all the cases. However, some different metabolites were observed with the change in the matrix or its characteristics such as cyclised products 2(N, N-dimethyl amino)thiazoline carboxylic acid and 2-thioxo-4-thiazolidine were observed only in plants. The investigations reflect that degradation initiates with hydrolysis, subsequently oxidation/dealkylation, followed by different types of reactions. The pathways seem to be complex and dependent on the matrices. Dimethyl dithiocarbamate and oxon metabolites, which are more toxic than parent compound, seem to persist for a longer time. Results indicate persistence vis-a-vis toxicity of pesticide and its metabolites and also provide a data bank of metabolites for forensic and epidemiological investigations.     

Residue and bio-efficacy evaluation of controlled release formulations of imidacloprid against pests in soybean (Glycine max)

Controlled release (CR) formulations of imidacloprid (1-(6 chloro-3-pyridinyl methyl)-N- nitro imidazolidin-2- ylideneamine) were prepared using novel amphiphilic polymers synthesized from polyethylene glycol and aliphatic diacids employing encapsulation technique. The bioefficacy of the prepared CR formulations was evaluated against major pests of soybean, namely stem fly, Melanagromyza sojae Zehntmer and white fly, Bemisia tabaci Gennadius along with a commercial formulation at the experimental farm of Indian Agricultural Research Institute (IARI), New Delhi during kharif 2009 and 2010. Most of the CR formulations of imidacloprid gave significantly better control of the pests compare to its commercial formulations, however the CR formulations, Poly [poly (oxyethylene-1000)-oxy suberoyl] amphiphilic polymer based formulation performed better over others for controlling of both stem fly incidence and Yellow Mosaic Virus (YMV) infestation transmitted by white fly. Some of the developed CR formulations recorded higher yield over commercial formulation and control. Nodulation pattern of soybean was not affected due to treatment of CR and commercial formulations of imidacloprid. Also the residues of imidacloprid in seed and soil at harvest were not detectable for both CR and commercial formulations.     

Volatile Organic Compounds in Ambient Air at Four Residential Locations in Seoul, Korea

To investigate the environmental behavior of volatile organic compounds (VOCs) in urban areas, their concentrations were measured at four urban monitoring sites (namely, N, S, E, and W) in Seoul, Korea (February to December 2009). A total of 27 compounds were quantified that consist of four chemical groups: aromatic (AR), halogenated aromatic, halogenated paraffin, and halogenated olefin. Results were evaluated by focusing on these four functional groups just mentioned and their summation term as total VOC (TVOC) along with several individual species (mainly AR species, that is, benzene, toluene, ethylbenzene, and xylene). The highest concentration of chemical groups was found from AR (71.1±42.1?ppbC), while that for individual species confirmed the dominance of toluene (7.48±3.88?ppb). The analysis of spatial distribution indicated that high TVOC levels were recorded at sites N and W, while it was not so significant such as S and E in terms of TVOC budget. Seasonal variation of these VOCs was characterized by the peak values in December to reflect the combined effects of pronounced source activities and meteorological conditions. Analysis of spatial variations in VOC levels between the four urban sites indicated that their distributions are tightly affected by local source processes in each area.     

Synthesis and pesticidal activity of new N-alkyl-N-[1-(2-hydroxyphenyl) ethyl]amines

A series of novel N-alkyl-N-[1-(2-hydroxyphenyl) ethyl]amines were synthesized as potential new agents to control pests. Their structures were confirmed on the basis of IR, NMR and elemental analyses. Six new N-alkyl-N-[1-(2-hydroxyphenyl) ethyl]amines were prepared by reduction of corresponding Schiff bases using sodium borohydride in 80–87 % yields. These compounds were tested for their antifungal activity against two pathogenic fungi viz., Rhizoctonia bataticola ITCC 0482 and Sclerotium rolfsii ITCC 5226 and for insecticidal activity against insects of stored grain pest Callosobruchus analis. Fungicidal bioassay revealed that compound N-Decyl-N-[1-(2-hydroxyphenyl)ethyl]amine, was highly effective against R. bataticola (ED₅₀ 6.86 mg L^?1) which was comparable with that of commercial fungicide hexaconazole (ED₅₀ 6.35 mg L^?1). Also compounds N-Heptyl-N-[1-(2-hydroxyphenyl)ethyl]amine, N-Octyl-N-[1-(2-hydroxyphenyl)ethyl]amine and N-Nonyl-N-[1-(2-hydroxyphenyl)ethyl]amine displayed promising fungitoxicity against same pathogen. However, compound N-Heptyl-N-[1-(2-hydroxyphenyl)ethyl]amine was also found to be effective against S. rolfsii (ED₅₀ 4.92 mg L^?1 as against 1.27 mg L^?1 for hexaconazole). Compound N-Hexyl-N-[1-(2-hydroxyphenyl)ethyl]amine was most effective as insecticide followed by compound N-Octyl-N-[1-(2-hydroxyphenyl)ethyl]amine. LC₅₀ values for these compounds were 155.0 and 275.0 mg L^?1 respectively as against 36.70 mg L^?1 for commercial insecticide dichlorovos. The results obtained from bioassays indicate that this class of compounds can be utilized for the design of new substances endowed with pesticidal activities.     

Diagnosis and Repair of Excessively Emitting Vehicles

Abstract

Between 1991 and 1993, the California Air Resources Board (CARB) selected 1,115 vehicles from all across the South Coast Air Basin to evaluate the effectiveness of the state's existing biennial motor vehicle Inspection/Maintenance (I/M) or Smog Check program. The vehicles were chosen to represent the population of cars that "should fail" properly conducted inspections. The cars were emissions-tested at baseline and sent undercover to licensed I/M garages throughout the basin. Federal Test Procedure (FIT) emissions were measured again for cars that were repaired. In the second year of the study, the vehicles that could be reproduced were tested at the CARB to measure the level of emissions deterioration and any underhood changes in emission control systems. In the third year, the cycle of emissions testing and undercover inspections and repair was repeated.

This paper uses data from the study to explore the relationships between super emitting vehicles (defined here as vehicles whose emissions are several times California certification standards) and diagnostics and repair of their underhood emissions control systems. Also examined is their appearance and improvement during a three-year period that includes two cycles of inspection and repair. An important finding is that once normalized to account for differences in certification standards, the super emitting vehicles do not have a unique signature in terms of their underhood emission control system failure modes, mileage, or age, when compared with the average vehicle expected to fail a Smog Check inspection. However, they are more likely to be identified, diagnosed, and repaired effectively than other vehicles, although they continue to reappear over time.     

Biodegradation of endosulfan-contaminated soil in a pilot-scale reactor-bioaugmented with mixed bacterial culture

A novel mixed bacterial culture was enriched from an endosulfan (6, 7, 8, 9, 10, 10 – hexachloro-1, 5, 5a, 6, 9, 9a-hexahydro-6, 9-methano-2, 3, 4-benzo (e) dioxathiepin-3-oxide) processing industrial surface soil. The cultures were successful in the degradation of aqueous phase endosulfan in both aerobic and anaerobic conditions. Using the cultures, endosulfan degradation in silty gravel with sand (GM) was examined via pilot scale reactor at an endosulfan concentration of 0.78 ± 0.01 mg g^{? 1} of soil, and optimized moisture content of 40 ± 1%. During operation, vertical spatial variability in endosulfan degradation was observed within the reactor. At the end of 56 days, maximum endosulfan degradation efficiency of 78 ± 0.2% and 86.91 ± 0.2% was observed in the top and bottom portion of the reactor, respectively. Both aerobic and anaerobic conditions were observed within the reactor. However, endosulfan degradation was predominant in anaerobic condition and the total protein concentration in the reactor was declined progressively down the soil depth. Throughout the study, no known intermediate metabolites of endosulfan reported by previous researchers were observed.     

Bio-efficacy evaluation of nanoformulations of β-cyfluthrin against Callosobruchus maculatus (Coleoptera: Bruchidae)

In the present investigation, bioefficacy of developed β-cyfluthrin formulations, utilizing laboratory synthesized poly(ethylene glycols) based amphiphilic copolymers, were evaluated against Callosobruchus maculatus (Coleoptera: Bruchidae). The bioefficacy data indicated that the formulations developed by utilizing polymers having PEG – 1500 (3c) and PEG – 2000 (3d) as the hydrophilic segment showed greater efficacy after 14 days as evident from EC₅₀ values (2.2 and 1.58 mg L^?1 respectively). Also, release from the commercial SC formulation was faster than developed formulations as the commercial formulation had the lowest EC₅₀ value on the first day (0.51 mg L^?1). The mean EC₅₀ of the commercial formulation against C. maculatus was quite high as compared to those of developed formulations. The results suggest that depending upon the polymer matrix used, the application rate of β-cyfluthrin can be optimized to achieve insect control at the desired level and period. The results described in this paper are promising and provide a comparison of developed formulations with the commercial one showing an earlier degradation of β-cyfluthrin in the latter and relatively prolonged activity in the former.     

Reverse phase high performance liquid chromatographic determination of Baygon in water

Abstract

A simple analytical procedure for determination of Baygon in water is described. The Baygon residues are extracted on a C₁₈ SEP‐PAK cartridge and subsequently analyzed by reverse phase high performance liquid chromatography using ultraviolet detection at 272 nm. Water samples spiked with Baygon are found to give greater than 90 percent recoveries.

Concentration levels as low as 20 ppb can be easily detected by this method.     

Distinctive effects of nano-sized permethrin in the environment

Pesticides are an essential tool in integrated pest management. Nanopermethrin was prepared by solvent evaporation from an oil-in-water volatile microemulsion. The efficacy of the formulated nanopermethrin was tested against Aedes aegypti and the results compared to those of regular, microparticular permethrin. The 24 h LC₅₀ for nanopermethrin and permethrin was found to be 0.0063 and 0.0199 mg/L, respectively. The formulated nanopermethrin was tested for toxicity against non-target organisms. Nanopermethrin did not show antibacterial activity against Escherichia coli (ATCC 13534 and 25922) or against Bacillus subtilis. Phytotoxicity studies of nanopermethrin to the seeds of Lycopersicum esculentum, Cucumis sativus, and Zea mays showed no restraint in root length and germination percentage. In the Allium cepa test, regular microparticular permethrin treatment of 0.13 mg/L showed a mitotic index (MI) of 46.8 % and chromosomal aberration of 0.6 %, which was statistically significant (p?<?0.05) compared to control. No significant differences were observed in 0.13 mg/L nanopermethrin exposure as compared to control (MI of 52.0 and 55.03 % and chromosomal aberration of 0.2 and 0 %, respectively). It was concluded that formulated nanopermethrin can be used as a safe and effectual alternative to commercially available permethrin formulation in agricultural practices.     

Renewable hydrocarbons through biomass hydropyrolysis process: challenges and opportunities

Considering the current issues of carbon control and the desire to become less dependent on imported oil, the utilization of renewable hydrocarbons for the reduction of CO₂ emission and production of liquid synthetic fuels/chemicals has been proposed by researchers worldwide. Efforts to make chemicals/fuels from renewable resources have escalated over the past few years. Biomass-based renewable hydrocarbons are considered to be one of the sources with the highest potential to contribute to the energy needs of modern society for both developed and developing economies worldwide. Fast pyrolysis is becoming an important thermal route to convert biomass to liquid fuels; however, the raw bio-oils obtained have a number of negative properties such as high acidity, high water content, and variable viscosity over time. To overcome this problem and produce bio-oil of good quality, process of ‘hyropyrolysis’ has been developed. The scope for using pyrolysis under hydrogen pressure and also by process of hydropyrolysis followed by in situ hydroconversion of vapors to give oils with much lower oxygen contents has been reviewed.