Metal distribution in incineration residues of municipal solid waste (MSW) in Japan

This study aimed to identify distribution of metals and the influential factors on metal concentrations in incineration residues. Bottom ash and fly ash were sampled from 19 stoker and seven fluidized bed incinerators, which were selected to have a variety of furnace capacity, furnace temperature, and input waste. In the results, shredded bulky waste in input waste increased the concentration of some metals, such as Cd and Pb, and the effect was confirmed by analysis of shredded bulky waste. During MSW incineration, lithophilic metals such as Fe, Cu, Cr, and Al remained mainly in the bottom ash while Cd volatilized from the furnace and condensed to the fly ash. About two thirds of Pb and Zn was found in the bottom ash despite their high volatility. Finally, based on the results obtained in this study, the amount of metal in incineration residues of MSW was calculated and the loss of metal was estimated in terms of mass and money. A considerable amount of metal was found to be lost as waste material by landfilling of incineration residues.     

Accumulation of Biophilic Elements in the Needles of Picea Species in Natural and Urbanized Ecosystems of Siberia and Central Asia in Relation to the Assessment of Environmental Quality

Variation in the content of N, P, K, Ca, Mg, Na, Cu, Zn, Mn, and Fe has been analyzed in the needles of 19 spruce species growing in the natural and urbanized ecosystems of Siberia and Central Asia. The results have shown that similarity in the content of biophilic elements in one-year-old needles of different species is conditioned by biochemical processes, which confirms the status of these species as passive bioindicators of environmental quality. The contents of trace elements in perennial needles, except color variations of chlorophyll, deserve further study as prospective indicators of environmental quality.     

Monoclonal antibody produced by heterologous indirect enzyme-linked immunosorbent assay and its application for parathion residue determination in agricultural and environmental samples

A heterologous indirect enzyme-linked immunosorbent assay (ELISA) was developed, which was based on monoclonal antibody (Mab) to determine parathion residue in agricultural and environmental samples. Eight Mabs were produced by introducing the heterologous indirect ELISA into the screening procedure. It was shown that these Mabs had more broad-reactivity with twenty competitors than that of 5H7 (Mab produced by homologous screening). So it became much easier using these new Mabs to develop heterologous immunoassays. In addition, all the developed heterologous ELISAs could be used to determine parathion residue in semiquantitative or quantitative level, and their detection limitation (LOD) was around 2 ng/mL. Compared with the previous heterologous ELISA (hapten 11/5H7) with IC₅₀ of 13.3 ng/mL, a better heterologous ELISA (hapten 11/1E1) was obtained with IC₅₀ of 3.8 ng/mL, which improved the sensitivity 3.5 times. Finally, the latter was applied to parathion residue determination in spiked agricultural and environmental samples without extraction or cleanup. The average recoveries of parathion added to water, soil, cucumber, Chinese cabbage and carrot were between 80.4 % and 111.8 %. The LOD for water and soil samples was 5 ng/mL, and the LOD for cucumber, rice and corn samples was 10 ng/mL.     

Sulfur Concentrations in Plant Foliage and Related Effects

Sulfur Is an essential element for plants and is normally taken up from soil In the sulfate form. S0₂ absorbed from the air also can supply S for plant nutrition. Plants are therefore dependent on an optimum S content, but deficiencies or excesses can result in deleterious effects. The Phytotoxicology Section has conducted numerous assessment surveys in rural, urban, or industrial locations in Ontario to determine the concentrations of S in plants and related effects. During the ten year period, 1968 to 1977, about 50,000 samples of vegetation and soil were collected and analyzed for S concentrations. The results of these analyses were examined with respect to natural background concentrations of S in foliage of 33 different species, and effects observed on plant life associated with excess concentrations of S. For example, in one situation 0.35% sulfur in foliage of trembling aspen trees was found to be the threshold level for injury to occur. Some of the industries surveyed for the degree and extent of S effects in their vicinity included pulp mills, power plants, iron concentrators, and gold, nickel, and copper smelters. In interpreting the results of S analyses in plant foliage for diagnostic purposes, consideration should be given also to the geographical location, the stage of growth of the plant, the relation of visible injuries to pollutant or biological causes, the S content of the soil, and S0₂ emission data for the area.     

Cleaner tanning practices for tannery pollution abatement: Role of enzymes in eco-friendly vegetable tanning

Concern about pollution related problems in the global scenario are persuading all the processing industries to adopt cleaner manufacturing practices. Thus, the leather industry is also under pressure to look for effective alternative tanning materials for chromium. Natural products like vegetable tannins are regaining importance. However, there are limitations in the use of vegetable tanning materials because of its high organic load in the effluent, which are difficult to degrade leading to high chemical oxygen demand (COD). Moreover, conventional vegetable tanning process requires partial pickling that involves the use of sodium chloride, to suppress osmotic swelling. This results in very high amount of total dissolved solid (TDS) content in wastewaters. In this investigation, an attempt has been made to design an eco-friendly vegetable tanning process combining pickle-free tanning and application of proteolytic enzymes to improve the exhaustion of vegetable tannins. Such an approach has resulted in more than 95% tannin exhaustion in the case of the experimental process, an increase of 10% compared with the conventional vegetable tanning process. The tanned leathers showed slight improvement in hydrothermal stability. Physical and tactile evaluation of experimental leathers has been better than conventionally tanned leathers. Surface colour values illustrated negligible variation in colour and shade between control and experimental leathers. The resultant leather showed opened up, split compact fibre structure that has been well coated, indicating that the enzyme assisted tanning process did not bring about any major change or destruction on the fibre structure of the leathers. The optimized system has been field tested in a commercial tannery. The results showed that the enzyme assisted tanning process is efficient in terms of improved quality of leather and also led to reduction in total solids (TS), chlorides and COD loads. The enzyme assisted tanning system presented appears to be a viable option for combating pollution arising from the conventional vegetable tanning system.     

Metabolic fate of dichloromethyl‐0,0‐diphenyl phosphonate (I) and dichloromethyl‐0,0‐di‐(p‐nitrophenyl) phosphonate (II) in/on rice plants∗

Abstract

Metabolic fate of two dichloromethyl diaryl phosphonates (³²P labelled) in/on rice plants was investigated. The test compounds were found to be less persistent on the surface of rice leaves with half lives 7.4 and 6.7 days respectively. Main degradation product from both the phosphonates were dichloromethyl phosphonic acid with trace of dichloromethyl‐O‐aryl phosphonate as a transitory intermediate product.     

Modeling the exposure of children and adults via diet to chemicals in the environment with crop-specific models

Exposure to chemicals via diet is a major uptake pathway for many compounds but is often estimated in a rather generic way. We use a new model framework (NMF) with crop-specific models to predict the dietary intake by 4-5-year-old children and 14-75-year-old women of three environmental compounds from their background concentrations in soil and air. Calculated daily intakes of benzo(a)pyrene and 2,3,7,8-TCDD are in good agreement with measured results from diet studies. The major source of both compounds in human diet is deposition from air. Inhalation of air and ingestion of soil play a minor role. Children take up more than twice the amount than adults per kg bodyweight, due to higher consumption per kg bodyweight. Contrary, the methods for indirect human exposure suggested in the Technical Guidance Document (TGD) for chemical risk assessment in the EU lead to overprediction, due to unrealistic consumption data and a false root model.     

Prenatal diagnosis of omphalocele and gastroschisis by ultrasonography

As the use of ultrasonography has become a routine procedure in the care of pregnant women, fetal congenital malformations have been frequently diagnosed prenatally. During a 4-year period abdominal wall defects (AWD) were diagnosed in 14 cases, five were gastroschises and nine were omphaloceles, seven females and seven males. Concomitant malformations were present in one case of gastroschisis and in five cases of omphalocele. Eleven AWD's were diagnosed in the second trimester and six pregnancies were interrupted. Eight children with AWD were born; two boys with omphalocele and one girl and one boy with gastroschisis are still alive. Alpha-fetoprotein was determined in amniotic fluid in 11 cases and also in maternal serum prior to the amniocentesis in eight cases. Chromosomal investigations were performed in 13 cases, 11 on amniotic fluid cells and two on lymphocytes from a blood sample made postnatally. Two abnormal karyotypes, 47,XX + 18 were found.     

Production of dibenzofuran fumes during splicing of PCB contaminated electrical cable

In the course of evaluating worker exposure during the hot splicing of underground electrical cable, it was discovered that the insulating tape used to make the original joints contained a high percentage (up to 10%) of PCB in the surface varnish. The heating of this PCB by a propane torch flame and molten solder as part of the normal operation of joint breakdown and remake resulted in a composition of airborne fume with a significant fraction (up to 1.3%) of the PCB that was converted to polychlorinated dibenzofurans (PCDF) with the tetra- and penta- chlorinated compounds as the predominant cogeners. No polychlorinated dibenzodioxins were detected.