自来水污泥堆肥化研究

研究了自来水污泥脱水防粘预处理技术、高温好氧堆肥技术及其应用于园林种植效果。机械组成测定和电镜扫描结果表明,调理剂QS可以显著改善自来水污泥的粘结性及脱水性能;堆肥实验结果表明,预处理的自来水污泥与枯枝落叶按体积比3∶7混匀,加入尿素调节碳氮比,27 d后,可达腐熟,EM菌可以加快堆肥物料腐熟,19 d后,即可达腐熟要求;桉树盆栽实验结果表明,自来水污泥经堆肥化处理后,保水性提高,促进桉树生长,而且堆肥过程中添加EM菌可以进一步促进桉树生长。     

峨嵋山冷杉衰亡与酸性降水关系的初步研究

本文报道了峨嵋山高海拔地区冷杉衰亡与酸性降水关系的调查和研究,内容包括酸性降水和气态污染物状况的观察,冷杉枝叶生长状况和针叶解剖,树干解剖和根系观察,冷杉冠层对酸性降水的反应及酸性降水在生态系统中的变化,土壤和冷杉的元素分析等方面,并就酸性降水对冷杉衰亡的影响进行了初步评价结果指出,峨嵋山高海拔地区的酸性降水污染严重,雨水的平均pH值为1.37,酸雨频率达85.1:雾水的pH值为1.62,酸雾频率达100 有可能对冷杉产生直接和间接影响。      

Global progress in climate change adaptation policies and its implication for China

This paper reviews the progress in climate change adaptation (CCA) policies both under the United Nations Framework Convention on Climate Change (UNFCCC) and in major regions and countries, including the EU and its major member countries, the influential developed countries in the Asia-Pacific region, the emerging economies and the least developed countries (LDCs). The progress made in China in CCA policies is also reviewed and compared with that in other countries. Finally, good international practices are proposed for China’s policy development. It is found that adaptation has been given the same priority as mitigation since the twenty-first century with regard to climate change-related actions. The topics related to adaptation in the international climate change negotiations under the UNFCCC have evolved from mechanisms for finance and technology development and transfer exclusively in the early stages to implementation of practical adaptation programs and actions. Since 2006, major developed and developing countries have frequently set forward specific CCA policies or general climate change policies involving adaptation in the form of laws, frameworks, strategies, and plans. The LDCs have also been working on National Adaptation Programmes of Action and subsequent National Adaptation Plans with the support from the financial mechanisms under the UNFCCC. Therefore, globally, it has become a common practice to develop national or regional policies to plan and guide CCA actions. China has established climate change policies involving adaptation at the national, regional, and sectorial levels since 2007. However, these policies have strong limitations in their knowledge base, strategic positioning, contents, and implementation mechanisms, e.g. lack of a sound knowledge base, an international perspective, clear responsibilities for policy implementation, and appropriate monitoring and evaluation mechanisms. It is recommended that China should further strengthen its technical capabilities in climate change projections as well as impact, vulnerability, and risk assessment, and develop methodologies and techniques for the preparation, impact assessment and implementation of CCA policies. Furthermore, future CCA strategies or plans should be developed with an emphasis on China’s vision and strategic position on the world stage.     

天然沸石同步去除水中氨氮和磷酸盐

通过静态吸附实验考察了浙江缙云产天然沸石对溶液中氨氮和磷酸盐的同步去除能力及机制,结果表明,天然沸石对溶液中氨氮的吸附过程较好地满足拟二级动力学模型、Langmuir和Dubinin-Radushkevich等温吸附模型。天然沸石对磷酸盐的去除能力随溶液中初始氨氮浓度的增加而增加。当溶液pH由7.0增加到9.0时,天然沸石对氨氮的吸附能力随之增加,而当pH由9.0增加到10时,天然沸石对氨氮的吸附能力则下降。当溶液pH低于7.5时,天然沸石对溶液中的磷酸盐无去除能力,当溶液pH位于7.5～9.0时,天然沸石对磷酸盐的去除能力随pH的增加急剧增加,当溶液pH大于9.0时,天然沸石对磷酸盐的去除能力随pH的增加则呈下降趋势。天然沸石对溶液中氨氮和磷酸盐的同步去除过程是自发进行、吸热及熵增加的过程。天然沸石对溶液中氨氮的吸附机制为离子交换,对磷酸盐的去除机制则为化学沉淀作用。     

石油石化行业急性中毒事故的现场抢救

石油石化行业工艺复杂,存在的有害因素种类繁多,一旦发生急性中毒其涉及面广、影响大,有时可造成严重危害。文章较为详细地介绍了该行业存在的主要有毒物质以及发生急性中毒事故的必要条件和特点,阐述了有毒物质侵入人体的途径主要为直接接触或通过呼吸,最后针对一般情况、吸入性中毒、直接接触造成危害的情况介绍了相应的现场急救处理措施。     

露天开采对周边地面的影响特点与破坏区划分方法的研究

露天开挖将引周围岩体的变形，随着采深和坡角的增大，其影响范围和影响程度都将增大。在我国有许多老矿区周边是密集城市群，开挖引起的变形对周边各种建筑设施和工厂的安全产生严重的影响。本文主要研究和探讨露天开采对地面建筑设施的影响特点，并就变形可能产生破坏程度进行分析，从而给出一般变形区、危险区和破坏区的划分原则和划分方法，以便为治理措施提供科学依据。     

环境保护的国际立法发展

"和平与"发展"、"环境保护"都被列为当今的世界主题正因如此,环境保护的国际立法也尤显重要.     

Identification of main influencing factors of life cycle CO2 emissions from the integrated steelworks using sensitivity analysis

The amount of CO₂ emissions from steelworks accounts for a great share of the total CO₂ emissions from industry in China. Thus, reducing CO₂ emissions from steelworks is urgent for China's environmental protection and sustainable development. This study aims at identifying factors that influence CO₂ emissions from steelworks and proposing measures to reduce CO₂ emissions. The life cycle inventory (LCI) of iron and steel products implies the relationship between the CO₂ emissions of the steelworks and the input variables of the LCI. The Tornado Chart Tool is utilized to calculate the variation of CO₂ emissions caused by the change of each input variables of LCI. Then, mean sensitivity of each input variable is calculated and the ranking criterion developed is used to identify the main factors influencing the integrated steelworks. Subsequently, measures for reducing CO₂ emissions are proposed. The results indicate that the very important influencing factors of CO₂ emissions in steelworks are the CO₂ emission factor of Blast Furnace Gas (BFG), liquid steel unit consumption of continuous casting, continuous casting slab unit consumption of hot rolling and hot metal ratio of steel making. Consequently, many efficient measures for reducing CO₂ emissions have been proposed, such as removing CO₂ contained in BFG, decreasing the hot metal ratio of Basic Oxygen Furnace (BOF), recycling BFG, optimizing the products' structure, etc.     

Temperature profile across the combustion zone propagating through an iron particle cloud

Knowledge of the mechanism of combustion zone propagation during dust explosion is of great importance to prevent damage caused by accidental dust explosions. In this study, the temperature profile across the combustion zone propagating through an iron particle cloud is measured experimentally by a thermocouple to elucidate the propagation mechanism. The measured temperature starts to increase slowly at a position about 5 mm ahead of the leading edge of the combustion zone, increases quickly at a position about 3 mm ahead of the leading edge, reaches a maximum value near the end of the combustion zone, and then decreases. As the iron particle concentration increases, the maximum temperature increases at lower concentration, takes a maximum value, and then decreases at higher concentration. The relation between the propagation velocity of the combustion zone and the maximum temperature is also examined. It is found that the propagation velocity has a linear relationship with the maximum temperature. This result suggests that the conductive heat transfer is dominant in the propagation process of the combustion zone through an iron particle cloud.