Statistical apportionment and risk assessment of selected metals in sediments from Rawal Lake (Pakistan)

The present study was carried out in order to evaluate the statistical apportionment and risk assessment of selected metals (Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Pb, Sr, and Zn) in freshly deposited sediments in Rawal Lake, Pakistan. Composite sediment samples were collected, oven-dried, grounded, homogenized, and processed to assess the water-soluble and acid extractable concentrations of the metals in the water extract and acid extract of the sediments using flame atomic absorption spectrophotometer. Statistical methods were used to identify the possible sources of the metals. Sediment quality guidelines and potential acute toxicity were used to evaluate the ecotoxicological sense of selected metals. Non-carcinogenic health risk assessment was also carried out to determine the potential adverse health risks to the inhabitants. Relatively higher concentration was noted for Ca, Fe, Mg, Na, K, Mn, and Sr in the sediment samples. Principal component analysis and cluster analysis revealed anthropogenic contributions of Cd, Pb, Cr, Mn, Fe, and Li in the sediments. Enrichment factors of the metals in sediments showed severe to moderate enrichment of Cd, Pb, Ca, Fe, Li, Mn, and Sr. Geoaccumulation indices and contamination factors evidenced significant contamination by Cd and Pb, although, on the whole, low degree of contamination was noted. The levels of some metals exceeded the sediment quality guidelines, which revealed frequently adverse biological effects to the dwelling biota in the aquatic ecosystem. The sediments were found to be significantly contaminated by Cd, Pb, Cr, Mn, Fe, and Li.     

Exposure assessment and associated lung deposition calculations for vehicular exhaust in four metropolitan cities of Pakistan

Ambient aerosol concentrations along the roadside of metropolitan cities of Pakistan were measured using a Grimm 1.109 dust monitor. Considering the high ambient aerosol concentrations, regional lung deposition of aerosol particles in the human respiratory tract was calculated to assess extent of exposure. Lung deposition was computed in terms of mass concentration and the associated surface area for 12 male traffic wardens using the latest version of the stochastic lung deposition code Inhalation, Deposition, and Exhalation of Aerosols in the Lung. The results have revealed 4 to 10 times higher concentrations than recommended by WHO guidelines. The deposition results derived from the model disclose that extrathoracic deposition is in the range of 22 to 28 % with total lung deposition ranging from 40 to 44 % for the scanned particle window of 0.25–10 μm. Considering an average 8-h shift per day and an average breathing rate of 1.3 m³?h^?1, it is approximated that in a worker, up to 1.6 mg of inhalable particle mass can deposit per day.     

The potential of cost-effective coconut husk for the removal of toxic metal ions for environmental protection

Coconut (Cocos nucifera) husk, an agricultural waste, has been thoroughly investigated for the removal of toxic Cd(II), Cr(III) and Hg(II) ions from aqueous media. The parameters like nature and composition of electrolyte, concentration of toxic ions, dosage of coconut husk, and equilibration time between the two phases were optimized for their maximum accumulation onto the solid surface. The effect of common ions on the uptake of metal ions has been monitored under optimal conditions. The variation of retention of each metal ion with temperature was used to compute the thermodynamic quantities DeltaH, DeltaS and DeltaG. The values 18.1+/-0.6 kJmol(-1), 74+/-2 Jmol(-1)K(-1), and -3.8+/-0.04 kJmol(-1) at 298 K; 10.8+/-0.8 kJmol(-1), 48.8+/-2.7 Jmol(-1)K(-1), and -4.6+/-0.3 kJmol(-1) at 298 K; and -37.4+/-2k Jmol(-1), 105+/-7 Jmol(-1)K(-1) and -2.58+/-0.5 kJmol(-1) at 298 K were obtained for Cd(II), Cr(III) and Hg(II) ions, respectively. The sorption data were analysed by applying different sorption isotherms. The sorption capacity and energy were evaluated for each metal ion. The values of the Freundlich constants 1/n and C(m) were 0.92+/-0.04 and 52.6+/-22.2 mmolg(-1); 0.85+/-0.05 and 56.0+/-0.03 mmolg(-1); and 0.88+/-0.03 and 6.84+/-0.45 mmolg(-1) for Cd(II) Cr(III) and Hg(II) ions, respectively. Similarly, the Dubinin-Radushkevich (D-R) constants beta, X(m,) and E were evaluated for the three metal ions. To check the selectivity of the sorbent, sorption of a number of elements was measured under similar conditions. Separation of Zn(II) from Cd(II); Cr(III) from I(I), Zr(IV), Se(IV), and Hg(II) from Se(IV) and Zn(II) can be achieved using this sorbent. This cheap material has potential applications in analytical chemistry, water decontamination, industrial effluent treatment and in pollution abatement.     

Monitoring of copper accumulation in water,soil, forage,and cows impacted by heavy automobiles in Sargodha,Pakistan

Environmental Science and Pollution Research - The instant endeavor was undertaken to monitor copper (Cu) contents in water, soil, forage, and cow’s blood impacted by heavy automobiles in...     

Evaluation and selection strategy for green supply chain using interval-valued q-rung orthopair fuzzy combinative distance-based assessment

Environment, Development and Sustainability - Environmental deterioration and global warming has created a substantial impact on international companies to incorporate eco-friendly, green supply...     

Efficacy of feed improvement in livestock farming to offset climate variations in Punjab,Pakistan: silage as an example

Environmental Science and Pollution Research - Globally, climate change is an alarming threat to the livestock industry. Such changes in the climate can also adversely affect the returns of...     

Temporal variation in leachate composition of a newly constructed landfill site in Lahore in context to environmental pollution and risks

Environmental Science and Pollution Research - This study investigated the seasonal and temporal variations in the extent and source of physiochemical and toxic trace elements in the Lakhodair...     

Detection and removal of heavy metal ions: a review

Environmental Chemistry Letters - In aqueous systems, heavy metal ions, when present in excess than permissible limits, are dangerous for human beings and aquatic life. Heavy metals cannot be...     

Neurotoxic effects of leptophos (PhosvelR) in chickens and rats following chronic low-level feeding.

Leptophos (O-[4-bromo-2,5 dichlorophenyl] O-methyl phenylphosphonothioate) (PhosvelR) was administered orally to chickens and rats in doses of 0.5 and 5.0 mg/kg/day for 26 weeks. Hens fed 5.0 mg/kg, except one, showed ataxia and became paralysed in the legs at varying times from 8 to 19 weeks. A fifth hen showed ataxia early in the experiment but recovered fully for the remainder of the experiment. Rats fed both doses and chickens fed 0.5 mg/kg showed no signs of delayed neurotoxicity. All hens fed 5.0 mg/kg stopped laying by about the third week. Animals of both species fed 5.0 mg/kg either lost weight (chickens) or gained less weight (rats) than the others. Erythrocyte acetylcholinesterase (AChE) of the chickens given both doses was significantly depressed at first, then increased, and later dropped to control levels. AChE of rats fed 0.5 mg/kg was significantly inhibited but soon recovered to within control levels. On the other hand, the AChE of rats fed 5.0 mg/kg was inhibited throughout the experiment. Plasma cholinesterase (ChE) of both species was first inhibited and then recovered erratically for both insecticide concentrations. Histological alterations in the spinal cord of paralysed hens included axon and myelin degeneration in the ventral, lateral and posterior columns. In the paralysed hens, 79% of the neurotoxic esterase in the brain were inhibited, whereas in the non-paralysed hens (including the one non-paralysed hen receiving 5.0 mg/kg/day) and all rats only about half as much was inhibited.     

Application of Cellulose Microfibrils in Polymer Nanocomposites

Cellulose microfibrils obtained by the acid hydrolysis of cellulose fibers were added at low concentrations (2–10% w/w) to polymer gels and films as reinforcing agents. Significant changes in mechanical properties, especially maximum load and tensile strength, were obtained for fibrils derived from several cellulosic sources, including cotton, softwood, and bacterial cellulose. For extruded starch plastics, the addition of cotton-derived microfibrils at 10.3% (w/w) concentration increased Young’s modulus by 5-fold relative to a control sample with no cellulose reinforcement. Preliminary data suggests that shear alignment significantly improves tensile strength. Addition of microfibrils does not always change mechanical properties in a predictable direction. Whereas tensile strength and modulus were shown to increase during addition of microfibrils to an extruded starch thermoplastic and a cast latex film, these parameters decreased when microfibrils were added to a starch–pectin blend, implying that complex interactions are involved in the application of these reinforcing agents.