Review of municipal solid waste management options in Malaysia,with an emphasis on sustainable waste-to-energy options

A beautiful and clean environment is the desire of every society. Malaysia is facing an uncontrolled increase in municipal solid waste (MSW) generation due to population growth, economic advancement, and industrialization, but the current, most common waste disposal practice of landfilling is not sustainable. The increasing standard of living also saps more energy from the power generation systems in which fossil fuels are the major source of fuel for the plants. Malaysia generates about 0.5–1.9 kg/capita/day of MSW; a total of about 25,000 tonnes/day of MSW is currently generated and is estimated to exceed 30,000 tonnes/day by 2020. Malaysian MSW is mainly composed of 45 % food waste, 24 % plastic, 7 % paper materials, 6 % metal, 4 % wood and 3 % glass, which are commingled, and is thus characterised by 52–66 % moisture content. Currently, 80–95 % of collected MSW is landfilled and 5 % is recycled, while composting and energy recovery are rarely practiced. This paper reviews the solid waste practice in Malaysia and looks into alternative management options for sustainability. Malaysia MSW represents recyclable power and energy potential if properly sorted. This study considered the practice of sorting at the source and the use of combustible MSW components as fuel to generate heat for a hybrid solar, flue gas, chimney power plant.     

Effects of fertilization on phosphorus distribution in water-stable aggregates of soils with different properties

Aggregation in agricultural soils is considered as an important physical process affected by fertilizers or manure addition. Therefore, the effects of two fertilizers, mineral and manure were assessed using three soils and correlate the soil properties on phosphorus distribution in water-stable aggregate (WSA). Application of manure increased the proportion of WSA (>5 mm) in all soil types, and mineral fertilizer (MF) slightly increased the proportion of microaggregates in entisols and isohumosols. Both fertilizers increased total phosphorus in all WSA sizes, and the highest values were observed in those of ferrosols and isohumosols. In entisols, the highest total phosphorus value was found in microaggregates in water-soluble form. Manure enhanced the organic phosphorus in all soil types, and MF resulted in enrichment of organic phosphorus in WSA (<2 mm) of entisols.     

Studies on the dissipation of 14C‐DDT from water and solid surfaces

Abstract

Dissipation of ¹⁴C‐p,p'‐DDT from water was studied for 180 days under outdoor conditions. DDT dissipated rapidly with overall half‐life of 53 days. The main degradation products were p,p'‐DDE and p,p'‐DDD. A portion of ¹⁴C‐residues was found in the sediment plus biomass (pellet) and on the inner surface of the glass container. This amounted to 7.2 and 6.7% of the initially added radioactivity, respectively. After 6 months, bound¹⁴C was more as compared to extractable ¹⁴C and p,p'‐DDD was the major metabolite of p,p'‐DDT in the extractable fraction. DDT dissipated from clay plates under indoor conditions with an overall half‐life of 160 days.     

Toxicity and metabolism of acephate in adult and larval insects

Abstract

Adult and larval insects from the terrestrial and aquatic environments were exposed to acephate. The chemical was more toxic to adult insects than to larvae, and was a poor insect cholinesterase inhibitor in vitro compared to methamidophos which was a much stronger inhibitor. Both acephate and methamidophos inhibited the adult cholinesterase in vitro much more strongly than they did the larval enzymes. Acephate was metabolized by the insects to methamidophos which did not appear to be the only metabolite, although no other metabolites were looked for. The cholinesterase of insects exposed to sublethal levels of acephate was inhibited, but this inhibition appeared to be due to the combined effect of acephate and methamidophos and not to any hypothetical substance with greater anticholinesterase activity. This was bourne out when acephate was incubated with mixed function oxidases (MFO). No activated product with potent anticholinesterase activity was identified. Methamidophos was not produced by the MFO system but by some other unidentified mechanism.     

Effectiveness of novel and traditional treatments on the performance of incinerator bottom ash waste

Management of natural aggregate resources has become one of the most important challenges in construction, especially for high demand applications such as roads. Incinerator bottom ash (IBA), which is produced from burning domestic waste, has been considered a useful solution to the shortage of natural resources. In this research, IBA was mixed with limestone to produce an acceptable blend for use as a road foundation layer. Novel and traditional additives were adopted to improve the mechanical properties of IBA blends. The study focused on the treatment effect of additives on the mechanical characteristics of IBA blends under monotonic and cyclic triaxial stresses. The investigation evaluated fundamental material properties, including resilient modulus, initial Young's modulus and Poisson's ratio. Two nonlinear empirical models were adopted to depict the experimental resilient modulus results of the IBA blends. An approach has been proposed to predict realistic and representative values of resilient modulus for the material. In addition, a new relationship has been established between Young's modulus, resilient modulus and Poisson's ratio. Triaxial test results revealed that additives are more efficient with the control limestone blend than with the IBA blends. Novel additives, such as enzyme I and silica fume, produced a noticeable improvement in IBA properties in comparison to traditional additives.     

Low cost sorbents for the removal of methyl parathion pesticide from aqueous solutions

Sorptive potential of selected agricultural waste materials i.e. rice (Oryza sativa) bran (RB), bagasse fly ash (BFA) of sugarcane (Saccharum officinarum), Moringa oleifera pods (MOP) and rice husk (RH) for the removal of methyl parathion pesticide (MP) from surface and ground waters has been investigated. Optimization of operating parameters of sorption process, i.e. sorbent dose, agitation time, pH, initial concentration of sorbate, and temperature have been studied. The sorption data fitted to Freundlich, Langmuir and Dubinin-Radushkevich (D-R) sorption isotherms. The maximum capacities of RB, BFA, MOP and RH for MP were calculated to be 3.6+/-0.8, 5.3+/-1.4, 5.2+/-1.5 and 4.7+/-1.0 mmolg(-1) by Freundlich, 0.39+/-0.009, 0.39+/-0.005, 0.36+/-0.004 and 0.35+/-0.008 mmolg(-1) by Langmuir and 0.9+/-0.08, 1.0+/-0.10, 1.0+/-0.10 and 0.9+/-0.07 mmolg(-1) by D-R isotherms respectively, employing 0.1g of each sorbent, at pH 6, 90 min agitation time and at 303 K. Application of first order Lagergren and Morris-Weber equations to the kinetic data yielded correlation coefficients, close to unity. Thermodynamic parameters of sorption process, i.e. DeltaH, DeltaS and DeltaG were computed and their negative values indicated the exothermic and spontaneous nature of sorption process. The pesticide may be stripped by sonication with methanol, making the regeneration and reutilization of sorbents promising. The sorbents investigated exhibited their potential applications in water decontamination, treatment of industrial and agricultural waste waters.     

Use of activated Chromolaena odorata biomass for the removal of crystal violet from aqueous solution: kinetic,equilibrium, and thermodynamic study

Environmental Science and Pollution Research - In the present study, biomass from the Chromolaena odorata plant’s stem was activated using sulfuric acid to adsorb crystal violet (CV) dye. The...     

Stimulating environmental performance via green human resource management,green transformational leadership,and green innovation: a mediation-moderation model

Environmental Science and Pollution Research - This study aims to evaluate the environmental performance of&nbsp;small and medium-sized enterprises (SMEs) through green human resource...     

Does Globalisation Worsen Environmental Quality in Developed Economies?

We examine the causal relationship between globalisation and CO₂ emissions for 25 developed economies in Asia, North America, Western Europe and Oceania using both time series and panel data techniques, spanning the annual data period of 1970–2014. Because of the presence of cross-sectional dependence in the panel, we employ Pesaran’s Journal of Applied Econometrics 22, 265–312 (2007) cross-sectional augmented panel unit root (CIPS) test to ascertain unit root properties. The Westerlund Oxford Bulletin of Economics and Statistics 69, 709–748 (2007) cointegration test is also used to ascertain the presence of a long-run association between globalisation and carbon emissions. The long-run heterogeneous panel elasticities are estimated using the Pesaran Econometrica, 74(4), 967–1012 (2006) common correlated effect mean group (CCEMG) estimator and the Eberhardt and Teal Productivity analysis in global manufacturing production (2010) augmented mean group (AMG) estimator. The causality between the variables is examined by employing the Dumitrescu and Hurlin Economic Modelling, 29, 1450–1460 (2012) and Emirmahmutoglu and Kose Economic Modelling, 28, 870–876 (2011) Granger causality tests. The empirical results reveal that globalisation increases carbon emissions, and thus, the globalisation-driven carbon emission hypothesis is valid. This empirical analysis suggests insightful policy guidelines for policy makers using ‘globalisation’ as an economic tool for better long-run environmental policy.     

Experimental investigation of dust pollutants and the impact of environmental parameters on PV performance: an experimental study

The accumulation of dust pollution on the photovoltaic (PV) module can have a significant effect on the productivity and efficiency of PV systems in different locations in the world. Dust which accumulated over time on the PV module and is based on weather conditions led to the reduction in the effectiveness of solar cells. The aim of this research was to experimentally investigate the effect of the natural dust and the effects of environmental parameters on PV performance. The experiments were conducted to propose a model for the current, voltage, power and efficiency and to simulate the effect of environmental parameters on PV performance. The natural dust investigated consisted of different compounds: SiO₂ (45.53 %), CaO (24.62 %), Al₂O₃ (10.83 %), Fe₂O₃ (10.46 %), MgO (6.33 %), K₂O (0.87 %), TiO₂ (0.45 %), SO₃ (0.24 %), MnO₂ (0.21), Cr₂O₃ (0.23 %), SrO (0.13 %) and NiO (0.09 %). It was found that the most accurate correlation is a polynomial from seventh degree for current, voltage, power and efficiency, fourth degree for solar radiation and temperature, cubic degree for humidity and wind velocity. The coefficients of general model are 0.6343, 0.0110, 0.0 and 0.0001 for PV module, respectively, with 0.0011 fitting factor. The proposed model has been validated using models in the literature.