Use of Natural 35S to Trace Sulphate Cycling in Small Lakes,Flattops Wilderness Area,Colorado, U.S.A.

Measurements of the cosmogenically-produced ³⁵S, a radioisotope of sulphur (t_1/2 = 87 days), are reported for the Ned Wilson Lake watershed in Colorado. The watershed contains two small lakes and a flowing spring presumed to be representative of local ground water. The watershed is located in the Flattops Wilderness Area and the waters in the system have low alkalinity, making them sensitive to increases in acid and sulphate deposition. Time series of ³⁵S measurements were made during the summers of 1995 and 1996 (July–September) at all three sites. The system is dominated by melting snow and an initial concentration of 16–20 mBq L^-1 was estimated for snowmelt based on a series of snow samples collected in the Rocky Mountains. The two lakes had large initial ³⁵S concentrations in July, indicating that a large fraction of the lake water and sulphate was introduced by meltwater from that year's snowpack. In 1995 and 1996, ³⁵S concentrations decreased more rapidly than could be accounted for by decay, indicating that other processes were affecting ³⁵S concentrations. The most likely explanation is that exchange with sediments or the biota was removing ³⁵S from the lake and replacing it with older sulphate devoid of ³⁵S. In September of 1995 and 1996, ³⁵S concentrations increased, suggesting that atmospheric deposition is important in the sulphate flux of these lakes in late summer. Sulphur-35 concentrations in the spring water were highly variable but never higher than 3.6 mBq L^-1 and averaged 2 mBq L^-1. Using a simple mixing model, it was estimated that 75% of the spring water was derived from precipitation of previous years.     

Deposition and Storage of Spheroidal Carbonaceous Fly-Ash Particles in European Mountain Lake Sediments and Catchment Soils

Spheroidal carbonaceous particles(SCPs) are produced only from high temperaturecombustion of fossil-fuels. In mountain lakesystems, they provide an unambiguous indicator ofatmospheric deposition. In order to comparedepositional fluxes of SCPs between mountainareas experiencing various pollutant regimes,intensive bulk deposition sampling was undertakenat five sites across Europe. Catchment soil coresand lake sediment cores were also taken at eachsite to compare SCP storage over the post-industrial period. Atmospheric, sediment and soilSCP data showed similar patterns. Highestcontamination was found in Scotland, Slovakia andSpain with the Austrian site intermediate and themid-Norwegian site least contaminated. A highproportion of accumulated SCPs were found to bestored in catchment soils at each site.Therefore, a significant increase in soilerosion, possibly as a result of future climatechange, could lead to the input of largequantities of catchment stored SCPs and, byimplication, other atmospherically depositedcontaminants to the lake ecosystem.     

Sustainability Criteria for Decision Support in the UK Water Industry

The incorporation of sustainability assessment into decision-making processes is a key task for water service providers in the UK and elsewhere. This paper describes the development and application of a set of sustainability criteria, which have been developed and tested with project partners in the UK and Romania. They will be used in a 'guidebook' that will set out a framework to facilitate the inclusion of sustainability in the decision-making process. This work is part of the Sustainable Water Industry Asset Resource Decisions project to develop a multi-criteria analysis decision support system to assist water service providers to assess the relative sustainability of water/wastewater system asset development decisions.     

Use of toxicity identification evaluation techniques to identify dredged material disposal options: A proposed approach

It is common to use the results of various solid-phase and aqueous-fraction toxicity tests as part of the decision-making process for selecting disposal options for dredged sediments. The mere presence of toxicity, however, does not provide a logical basis for selecting economical, environmentally protective disposal techniques. To achieve this, it is necessary to be able to identify specific compounds responsible for sediment toxicity. Toxicity identification evaluation (TIE) procedures, originally developed for complex effluents, represent a useful approach for identifying acutely toxic compounds in dredged materials. Herein we present a conceptual overview for TIE use in part of the decision-making framework for selecting dredged material disposal options; included are discussions concerning appropriate test fractions and species for TIE analyses, and specific TIE manipulations useful for ascertaining whether toxicity is due to any of a number of common sediment contaminants including ammonia, hydrogen sulfide, metals, or nonpolar organics.     

Building audits into tqem measurement systems at P&G

This article discusses an approach to building environmental compliance audits into an effective TQEM measurement system. With this approach, companies can move their existing programs from just “meeting the law” to being viewed as “leaders in environmental excellence.” The benefit of this change is that local communities are more likely to allow their environmental leaders the operating flexibility that minimizes cost and the necessary permits for expansion.     

DETERMINATION OF BEST TIMING FOR POULTRY WASTE DISPOSAL: A MODELING APPROACH1

ABSTRACT: Confined production of poultry results in significant volumes of waste material which are typically disposed of by land application. Concerns over the potential environmental impacts of poultry waste disposal have resulted in ongoing efforts to develop management practices which maintain high quality of water downstream of disposal areas. The timing of application to minimize waste constituent losses is a management practice with the potential to ensure high quality of streams, rivers, and lakes downstream of receiving areas. This paper describes the development and application of a method to identify which time of year is best, from the standpoint of surface water quality, for land application of poultry waste. The procedure consists of using a mathematical simulation model to estimate average nitrogen and phosphorus losses resulting from different application timings, and then identifying the timings which minimize losses of these nutrients. The procedure was applied to three locations in Arkansas, and three different criteria for optimality of application timing were investigated. One criterion was oriented strictly to water quality, one was oriented only to crop production, and the last was a combination. The criteria resulted in different windows of time being identified as optimal. Optimal windows also varied with location of the receiving area. The results indicate that it is possible to land-apply poultry waste at times which both minimize nutrient losses and maximize crop yield.     

EFFECTS OF SLUDGE AND CHEMICAL FERTILIZER APPLICATION ON RUNOFF WATER QUALITY1

ABSTRACT: Simulated rainfall was used on experimental field plots to compare the effect of chemical fertilizer and sludge application on sediment, nitrogen, and phosphorus in runoff from no-till and conventional tillage systems. Chemical fertilizer application under the no-till system resulted in the least amount of total N and P in surface runoff. However, sludge application under the no-till system resulted in the least amount of NO₃-N and sediment in surface runoff. The worst water quality scenarios were observed when either sludge or chemical fertilizer were surface-applied under a conventional tillage system. Nitrogen losses from the conventional tillage system were minimized when sludge was incorporated into the soil. However, phosphorus and sediment yield from such a system were significantly higher when compared to phosphorus and sediment yield from the no-till system. The results from this study indicate that the use of sludge on agricultural land under a no-till system can be a viable alternative to chemical fertilizer for nitrogen and phosphorus control in runoff. A more cautious approach is recommended when the sludge is incorporated into the soil in a conventional tillage system because of potential for high sediment and phosphorus yield in surface runoff.     

WATER QUALITY PREDICTION WITHIN AN INTERBASIN TRANSFER SYSTEM1

ABSTRACT A methodology for predicting the spatial and temporal levels of conservative water quality constituents within a multibasin water resource system is presented. Dissolved solids, sulfates, and chlorides are the constituents used during this investigation; however, any other conservative ion or mineral can be incorporated into the simulation model. The methodology is tested on the proposed Texas Water System. The water quality model, QNET-I, utilizes monthly canal and river flows and reservoir storage levels calculated by the Texas Water Development Board's systems simulation model. Discharge-concentration relationships are developed for each source of water in the system, including significant waste-water discharges. Reservoirs in the system are assumed to be completely mixed with respect to conservative constituents. A mass balance analysis is performed for each node and each month during the simulation period. The output from the water quality simulation is a table of the concentrations of the conservative water quality constituents at each demand point in the system and in each reservoir and canal for every month the system is in operation. The desired quality of the water at the demand locations is used to determine the economic utility of transporting and mixing water from various sources.     

IMPROVED RIVER BASIN UTILIZATION THROUGH SYSTEMS ANALYSIS1

ABSTRACT. Theoretical and practical results are summarized for a study to determine optimal water resource allocation in a proposed water conservancy district. The area of this district, which covers several river basins, contains a large number of existing and proposed facilities such as reservoirs and diversions. The operation of all of these facilities was to be determined along with the sizing of the proposed facilities in order to optimize given objective functions. Related efforts in optimal river basin utilization were surveyed, and linear programming was selected as an expedient optimization technique. The problem is formulated by identifying time stages which together constitute a repetitive cycle such as a year. With these stages, it is possible to associate operational and capacity variables with network components, which are branches and nodes. Objective functions are assembled for the component variables. Constraint equations are written in terms of the variables to reflect network nodal continuity, capacity restrictions, and adjudications such as water rights. A numerical example is considered in which the existing and proposed facilities are aggregated to produce a small, tractable number of facilities. This paper examines the example results and suggests future improvements for models of this type.     

DISTRIBUTED DISCHARGE OF COOLING WATER ALONG DIRECTION OF STREAM FLOW1

ABSTRACT. A multiple-outfall system for cooling water disposal which is distributed along the direction of stream flow is analyzed. The results provide a simple method of preliminary design of a cooling water discharge outfall system and for a quick extimate of water quality of a polluted stream. It is shown that a properly designed distributed discharge system is capable of preventing serious pollution due to localized discharge of wastes and waste heat; however, the final design of the discharge system should take into account alternative schemes of waste heat disposal and their economic consequences.