On polyphagism

This paper presents a mathematical formulation of the principle of polyphagism. The effect of the principle is illustrated on the polyphagic model worked out after analysis of Ivlev's (1955) experimental data.     

Thermal behaviour of chromium electroplating sludge

Galvanic sludge is classified as a hazardous waste and incineration is one of the techniques used for its treatment. The aim of this work is to study the thermal behavior of a galvanic sludge which contains only chromium as a restriction metal. Simultaneous DTA/TG coupled with mass spectrometer tests were performed to characterize the thermal behavior of the sludge. Besides thermal analysis, sludge samples were heated in a specially designed furnace and these samples were submitted to X-ray diffraction. Vapor from the heated sludge was condensed and the particles were analyzed by EDS microprobe coupled in a scanning electron microscope. The slag formed after the calcination of the galvanic sludge was mainly composed of a mixture of calcium phosphate and fluoride. and minor concentrations of metals. A total weight loss of 34% was observed. The greatest part of this weight loss corresponds to CO2, H2O and SO2. H2O is liberated in the temperature range of 500-1,250 degrees C. CO2 in the range of 500-750 degrees C and SO2 near 1,000 degrees C. Chromium evaporation was not observed in relevant quantities, about 99.6% of the Cr remained incorporated in the slag.     

Metal separation from mixed types of batteries using selective precipitation and liquid-liquid extraction techniques

The purpose of this paper is to study metal separation from a sample composed of a mixture of the main types of spent household batteries, using a hydrometallurgical route, comparing selective precipitation and liquid-liquid extraction separation techniques. The preparation of the solution consisted of: grinding the waste of mixed batteries, reduction and volatile metals elimination using electric furnace and acid leaching. From this solution two different routes were studied: selective precipitation with sodium hydroxide and liquid-liquid extraction using Cyanex 272 [bis(2,4,4-trimethylpentyl) phosphoric acid] as extracting agent. The best results were obtained from liquid-liquid extraction in which Zn had a 99% extraction rate at pH 2.5. More than 95% Fe was extracted at pH 7.0, the same pH at which more than 90% Ce was extracted. About 88% Mn, Cr and Co was extracted at this pH. At pH 3.0, more than 85% Ni was extracted, and at pH 3.5 more than 80% of Cd and La was extracted.     

高校教师职称评审量化考核体系探讨

教师任职资格评审是一项政策性很强的工作。本文在参照历史做法的基础上,努力探索了对高校教师任职资格进行量化考核的途径,提出了量化考核测评指标体系及评审程序。     

Imposex and butyltin contamination off the Oporto Coast (NW Portugal): a possible effect of the discharge of dredged material

Imposex in the gastropod Hinia reticulata, a bioindicator for tributyltin (TBT) contamination, was investigated in locations at different distances from the Oporto harbour-dredged material discharge site. The degree of imposex found was inversely related to the distance to the discharge site, the highest imposex frequency being found closest to the discharge area. However, the levels of imposex found were low when compared with those reported for H. reticulata populations from moderately TBT-contaminated areas. Despite detectable levels of dibutyltin (DBT) and monobutyltin (MBT) in snail tissues (total butyltins ranging from 84 to 410 ng/g Sn dry wt.), TBT was below detection limit in all snail samples collected in open sea.     

Recycling of WEEE: characterization of spent printed circuit boards from mobile phones and computers

This paper presents a comparison between printed circuit boards from computers and mobile phones. Since printed circuits boards are becoming more complex and smaller, the amount of materials is constantly changing. The main objective of this work was to characterize spent printed circuit boards from computers and mobile phones applying mineral processing technique to separate the metal, ceramic, and polymer fractions. The processing was performed by comminution in a hammer mill, followed by particle size analysis, and by magnetic and electrostatic separation. Aqua regia leaching, loss-on-ignition and chemical analysis (inductively coupled plasma atomic emission spectroscopy - ICP-OES) were carried out to determine the composition of printed circuit boards and the metal rich fraction. The composition of the studied mobile phones printed circuit boards (PCB-MP) was 63 wt.% metals; 24 wt.% ceramics and 13 wt.% polymers; and of the printed circuit boards from studied personal computers (PCB-PC) was 45 wt.% metals; 27 wt.% polymers and ceramics 28 wt.% ceramics. The chemical analysis showed that copper concentration in printed circuit boards from personal computers was 20 wt.% and in printed circuit boards from mobile phones was 34.5 wt.%. According to the characteristics of each type of printed circuit board, the recovery of precious metals may be the main goal of the recycling process of printed circuit boards from personal computers and the recovery of copper should be the main goal of the recycling process of printed circuit boards from mobile phones. Hence, these printed circuit boards would not be mixed prior treatment. The results of this paper show that copper concentration is increasing in mobile phones and remaining constant in personal computers.     

Determination of Cu and Ni incorporation ratios in Portland cement clinker

Cu and Ni are metals found in galvanic sludges; these sludges are considered hazardous due to their heavy metal content. The main objective of this work is to determine the incorporation amount of Cu and Ni in Portland clinker when a galvanic sludge containing these metals is added to the clinker raw-material. The influence of this addition on the clinkering reactions is evaluated as well as the possibility of co-incinerating galvanic sludges containing Cu and Ni in rotary cement kilns. This study also characterizes the galvanic sludge. Samples were prepared by additions from 0.25 to 5 wt.% of a galvanic sludge to an industrial clinker raw-material. The clinkering process was simulated in a laboratory device. The following techniques were applied to characterize the raw materials and the products of the tests: chemical analysis, differential thermal analysis (DTA) and thermogravimetric analysis (TG). Leaching tests were performed in the produced clinker samples in order to verify the incorporation of the studied metals in the clinker structure. The results led to the conclusion that additions of up to 2 wt.% of a galvanic sludge containing 2.4 wt.%Cu and 1.2 wt.% Ni to clinker raw-material do not affect the clinkering reactions and that these metals are totally incorporated into the clinker.     

Personnel department expenditures and labor productivity

Empirical evidence relating personnel department budgets to desired organizational outcomes remains sketchy and inconclusive. An analysis was conducted of the relationship between previous year's personnel department expenditures and total annual output, for 11 large railroads over a six-year period. There was a significant partial correlation between these two variables. However, after controlling for total assets and workforce size, a regression analysis indicated that individual railroads were unable to adjust their personnel department expenditures over time to maximize productivity. Implications for research and practice are discussed.     

Prenatal diagnosis of inherited metabolic disorders by quantitation of characteristic metabolites in amniotic fluid: Facts and future

An attempt is made to summarize as completely as possible what is known about the prenatal diagnosis of amino– and organic acidurias by direct measurement of characteristic metabolites in amniotic fluid, and to indicate which disorders can potentially be diagnosed prenatally by direct quantitation of metabolites. Furthermore, the disorders are mentioned in which the prenatal diagnosis was proven to be unsuccessful by this approach. The prenatal diagnoses of a case of propionic acidemia and a case of tyrosinemia type I in the 11th and 12th week of gestational age, respectively, are reported and the prospects of performing amniocentesis in the first trimester for prenatal diagnosis are discussed.     

Physical analyses of compost from composting plants in Brazil

Nowadays the composting process has shown itself to be an alternative in the treatment of municipal solid wastes by composting plants. However, although more than 50% of the waste generated by the Brazilian population is composed of matter susceptible to organic composting, this process is, still today, insufficiently developed in Brazil, due to low compost quality and lack of investments in the sector. The objective of this work was to use physical analyses to evaluate the quality of the compost produced at 14 operative composting plants in the Sao Paulo State in Brazil. For this purpose, size distribution and total inert content tests were done. The results were analyzed by grouping the plants according to their productive processes: plants with a rotating drum, plants with shredders or mills, and plants without treatment after the sorting conveyor belt. Compost quality was analyzed considering the limits imposed by the Brazilian Legislation and the European standards for inert contents. The size distribution tests showed the influence of the machinery after the sorting conveyer on the granule sizes as well as the inert content, which contributes to the presence of materials that reduce the quality of the final product.