Selective separation of copper(II) and nickel(II) from aqueous media using the complexation-ultrafiltration process

The polyethylenimine (PEI) as complexing agent was used to study the complexation-ultrafiltration (CP-UF) process in the selective removal of Cu(II) from Ni(II) contained in aqueous media. Preliminary tests showed that optimal chemical conditions for Cu(II) and Ni(II) complexation by the PEI polymer were pH>6.0 and 8.0, respectively, and polymer/metal weight ratio of 3.0 and 6.0, respectively. The effect of some important operating parameters on process selectivity was studied by performing UF tests at different parameters: pH, polymer/metal weight ratio, transmembrane pressure (TMP), and membrane cut-off in a batch experimental set-up. It was observed that process selectivity was achieved by choosing the pH value for obtaining a preferential copper complexation (pH 6.0), and the polymer/metal ratio needed to bound only the copper ion (3.0). The selective separation by UF tests was performed by using both a laboratory aqueous solution and a real aqueous effluent (water from Emoli torrent, Rende (CS)). The Iris 30 membrane at TMP of 200 kPa (2 bar) for both aqueous media gave the best results. A complete nickel recovery was reached, and copper recovery was the highest for this membrane (94% and 92%). Besides at this pressure, a lower water amount was needed to obtain total nickel recovery by diafiltration. A little higher membrane fouling was obtained by using the river effluent due to the presence of dissolved organic and inorganic matter.     

Ca-Mg kutnahorite and struvite production by Idiomarina strains at modern seawater salinities

The production of Mg-rich carbonates by Idiomarina bacteria at modern seawater salinities has been investigated. With this objective, four strains: Idiomarina abyssalis (strain ATCC BAA-312), Idiomarina baltica (strain DSM 15154), Idiomarina loihiensis (strains DSM 15497 and MAH1) were used. The strain I. loihiensis MAH1 is a new isolate, identified in the scope of this work. The four moderately halophilic strains precipitated struvite (NH4MgPO4 x 6H2O) crystals that appear encased by small Ca-Mg kutnahorite [CaMg(CO3)2] spheres and dumbbells, which are also regularly distributed in the bacterial colonies. The proportion of Ca-Mg kutnahorite produced by the bacteria assayed ranged from 50% to 20%, and I. abyssalis also produced monohydrocalcite. All precipitated minerals appeared to be related to the bacterial metabolism and, consequently, can be considered biologically induced. Amino acid metabolism resulted in a release of ammonia and CO2 that increase the pH and CO(3)(2-) concentration of the culture medium, creating an alkaline environment that favoured carbonate and struvite precipitation. This precipitation may be also related to heterogeneous nucleation on negatively charged points of biological structures. Because the nature of the organic matrix determines which ion is preferentially adsorbed and, consequently, which mineral phase is formed, the uniquely high content in odd-iso-branched fatty acids of the Idiomarina suggests that their particular membrane characteristics could induce Ca-Mg kutnahorite production. The Ca-Mg kutnahorite, a mineral with a dolomite-ordered structure, production at seawater salinities is noticeable. To date, such precipitation in laboratory cultures, has only been described in hypersaline conditions. It has also been the first time that biomineralization processes have been related to Idiomarina bacteria.     

Mechanistics of trichloroethylene mineralization by the white-rot fungus Trametes versicolor

The white-rot fungus Trametes versicolor degraded trichloroethylene (TCE), a highly oxidized chloroethene, and produced 2,2,2-trichloroethanol and carbon dioxide as the main products of degradation, based on the results obtained using [13C]-TCE as the substrate. For a range of concentrations of TCE between 2 and 20 mg l(-1), 53% of the theoretical maximum chloride expected from complete degradation of TCE was observed. Laccase was shown to be induced by TCE, but did not appear to play a role in TCE degradation. Cytochrome P-450 appears to be involved in TCE degradation, as evidenced by marked inhibition of degradation of TCE in the presence of 1-aminobenzotriazole, a known inhibitor of cytochrome P-450. Our results suggested that chloral (trichloroacetaldehyde) was an intermediate of the TCE degradation pathway. The results indicate that the TCE degradation pathway in T. versicolor appears to be similar to that previously reported in mammals and is mechanistically quite different from bacterial TCE degradation.     

Hydroponic phytoremediation of Cd, Cr, Ni, As, and Fe: can Helianthus annuus hyperaccumulate multiple heavy metals?

Sundance sunflowers were subjected to contaminated solutions containing 3, 4, or 5 heavy metals, with and without EDTA. The sunflowers exhibited a metal uptake preference of Cd=Cr>Ni, Cr>Cd>Ni>As and Fe>As>Cd>Ni>Cr without EDTA and Cr>Cd>Ni, Fe>As>Cd>Cr>Ni with EDTA. As uptake was not affected by other metals, but it decreased Cd and Ni concentration in the stems. The presence of Fe improved the translocation of the other metals regardless of whether EDTA was present. In general, EDTA served as a hindrance to metal uptake. For the experiment with all five heavy metals, EDTA decreased Cd in the roots and stems from 2.11 to 1.36 and from 2.83 to 2.3 2mg g(-1) biomass, respectively. For the same conditions, Ni in the stems decreased from 1.98 to 0.94 mg g(-1) total metal uptake decreased from 14.95 mg to 13.89 mg, and total biomass decreased from 2.38 g to 1.99 g. These results showed an overall negative effect in addition of EDTA. However it is unknown whether the negative effect was due to toxicity posed by EDTA or the breaking of phytochelatin-metal bonds. The most important finding was the ability of Sundance sunflowers to achieve hyperaccumulator status for both As and Cd under all conditions studied. Ni hyperaccumulator status was only achieved in the presence of three metals without EDTA.     

Copper, nickel and lead in lichen and tree bark transplants over different periods of time

This work aimed at comparing the dynamics of atmospheric metal accumulation by the lichen Flavoparmelia caperata and bark of Platanus hybrida over different periods of time. Transplants were exposed in three Portuguese coastal cities. Samples were retrieved (1) every 2 months (discontinuous exposure), or (2) after 2-, 4-, 6-, 8- and 10-month periods (continuous exposure), and analysed for Cu, Ni and Pb. Airborne accumulation of metals was essentially independent of climatic factors. For both biomonitors [Pb]>[Ni]>[Cu] but Pb was the only element for which a consistent pattern of accumulation was observed, with the bark outperforming the lichen. The longest exposure periods hardly ever corresponded to the highest accumulation. This might have been partly because the biomonitors bound and released metals throughout the exposure, each with its own dynamics of accumulation, but both according to the environmental metal availability.     

Monitoring the fall of large atmospheric ice conglomerations: a multianalytical approach to the study of the Mejorada del Campo megacryometeor

Certain local atmospheric anomalies, such as the formation of unusually large ice conglomerations (megacryometeors), have been proposed to be a potential natural hazard for people and aviation, as well as geoindicators for fingerprinting larger-scale atmospheric environmental changes. On March 13th 2007, at approximately 10:15 am, an ice chunk weighing about 10 kg fell from the clear-sky and crashed through the roof (around 15 m) of an industrial storage house in Mejorada del Campo, a town located 20 km east from Madrid. The megacryometeor monitoring follow-up and the original investigation presented here includes, for the first time, both logistic and scientific collaboration between the Laboratory of the Environment, Criminalistic Service (SECRIM, the Spanish "Guardia Civil") and academic and scientific institutions (universities and the Spanish National Research Council). We propose that the management procedure of the incident, along with the detailed scientific research and combination of analytical methodologies in different laboratories, can serve as a protocol model for other similar events.     

Long-Term Air Quality Assessment: Modeling Sources Contribution and Scenarios In Ivrea And Torino Areas

An evaluation of the air quality based on the combined use of monitoring data, dynamic emission inventories, and three-dimensional modeling has been performed in an area in North West Italy. Yearly maps of the pollutants of most concern have been produced by means of an Eulerian modeling system, run for two nested domains. The system is based on MINERVE diagnostic meteorological model, TREFIC (TRaffic Emission Factors Improved Calculation) traffic emission module, and farm air quality regional chemical-transport model. The zooming approach has allowed to correctly reproduce local concentrations in the small urban area in the inner domain as well as to quantify the role played by selected local sources respect to distant ones. The study of the impact of the future car fleet, pointing out the expected improvement for nitrogen oxides and the persisting problem of PM, provides a rationale for air quality governance.     

The source of DDT and its metabolites contamination in Turkish agricultural soils

The concentration and impact of 1,1,1-trichloro-2,2-bis(4-chlorophenyl)-ethane (DDT) and its metabolites (DDE: 1,1-dichloro-2,2-bis(4-chlorophenyl)ethylene) on the environment was expected to decrease after its ban in the mid-1980s. Unfortunately, DDT contamination via its presence as an impurity in dicofol (2,2,2-trichloro-1,1-bis(4-chlorophenyl)ethanol) has led to a new source of contamination. This is particularly true especially in cotton production in Söke Plain, Turkey, where difocol-based pesticides are being used. The aim of this research was to investigate the extent and source of DDT contamination in cotton soils. Söke Plain soil samples were collected from 0–30, 30–60, and 60–90-cm depth and analyzed by GC/MS/MS. o,p′-DDT and p, p′-DDE were detected at 16.2 % and 17.6 % of the sites in the 0–30-cm depth of soils. In the 30–60 cm, p, p′-DDT (14.9 %), o, p′-DDE (8.1 %) and p, p′-DDE (2.7 %) were found in soil samples, and p, p′-DDT was the most prevalent with 9.5 % of the sampling sites. The dominant source of DDT particularly in the 60–90-cm depth was due to historic use of DDT. The presence of p, p′-DDE, o, p′-DDE and p,p′-DDT in the topsoil was attributed to recent dicofol applications.     

Fractionation and mobility of metals in bauxite red mud

Red mud (RM) is a strongly alkaline residue generated in enormous amounts worldwide from bauxite refining using the Bayer chemical process. RM is composed mainly of Fe, Ti and Al oxides and hydroxides, but it also contains an array of trace metals and metalloids at different concentrations. The purpose of this paper is to assess the potential mobility of metals in RM, with special emphasis on pH effect. The ‘operational’ distribution and leachability of metals within/from RM was studied by applying a sequential extraction procedure (SEP) and several leaching tests (rapid titration, equilibration acidification, batch leaching with acetic acid and also the toxicity characteristics leaching procedure (TCLP) and the DIN 38414-S4 procedures, used as reference methods) carried out at different pH, solid/liquid ratio, extraction period and type of acid (HCl or acetic acid). Chemical analysis showed that, in addition to the major metals Fe, Al and Ti, RM contains several trace metals, some of them (Cr, Cu and Ni) in concentrations exceeding the regulatory limits. SEP showed that a majority of the metals in the RM (between the 32.2?±?8.5 for Cd and 95.3?±?0.4 % for Ni) were found in the residual fraction, suggesting that they are not readily mobile under normal environmental conditions. Leaching tests performed at different pH showed that a significant fraction of the metals is mobilised from RM only under very strong acid conditions (pH?<?2), whereas Al is released in considerable amounts at pH?<?5.3. Among the trace metals, Cr requires special attention because of its relative high concentration in RM and the higher concentrations of this metal mobilised at low pH. The leaching tests using acetic acid showed that the standard TCLP largely underestimates the release of trace metals from RM, and therefore it is not advisable to evaluate the actual potential leaching of trace metals from this residue.