Biodegradation potential of MTBE in a fractured chalk aquifer under aerobic conditions in long-term uncontaminated and contaminated aquifer microcosms

The potential for aerobic biodegradation of MTBE in a fractured chalk aquifer is assessed in microcosm experiments over 450 days, under in situ conditions for a groundwater temperature of 10 °C, MTBE concentration between 0.1 and 1.0 mg/L and dissolved O₂ concentration between 2 and 10 mg/L. Following a lag period of up to 120 days, MTBE was biodegraded in uncontaminated aquifer microcosms at concentrations up to 1.2 mg/L, demonstrating that the aquifer has an intrinsic potential to biodegrade MTBE aerobically. The MTBE biodegradation rate increased three-fold from a mean of 6.6 ± 1.6 μg/L/day in uncontaminated aquifer microcosms for subsequent additions of MTBE, suggesting an increasing biodegradation capability, due to microbial cell growth and increased biomass after repeated exposure to MTBE. In contaminated aquifer microcosms which also contained TAME, MTBE biodegradation occurred after a shorter lag of 15 or 33 days and MTBE biodegradation rates were higher (max. 27.5 μg/L/day), probably resulting from an acclimated microbial population due to previous exposure to MTBE in situ. The initial MTBE concentration did not affect the lag period but the biodegradation rate increased with the initial MTBE concentration, indicating that there was no inhibition of MTBE biodegradation related to MTBE concentration up to 1.2 mg/L. No minimum substrate concentration for MTBE biodegradation was observed, indicating that in the presence of dissolved O₂ (and absence of inhibitory factors) MTBE biodegradation would occur in the aquifer at MTBE concentrations (ca. 0.1 mg/L) found at the front of the ether oxygenate plume. MTBE biodegradation occurred with concomitant O₂ consumption but no other electron acceptor utilisation, indicating biodegradation by aerobic processes only. However, O₂ consumption was less than the stoichiometric requirement for complete MTBE mineralization, suggesting that only partial biodegradation of MTBE to intermediate organic metabolites occurred. The availability of dissolved O₂ did not affect MTBE biodegradation significantly, with similar MTBE biodegradation behaviour and rates down to ca. 0.7 mg/L dissolved O₂ concentration. The results indicate that aerobic MTBE biodegradation could be significant in the plume fringe, during mixing of the contaminant plume and uncontaminated groundwater and that, relative to the plume migration, aerobic biodegradation is important for MTBE attenuation. Moreover, should the groundwater dissolved O₂ concentration fall to zero such that MTBE biodegradation was inhibited, an engineered approach to enhance in situ bioremediation could supply O₂ at relatively low levels (e.g. 2–3 mg/L) to effectively stimulate MTBE biodegradation, which has significant practical advantages. The study shows that aerobic MTBE biodegradation can occur at environmentally significant rates in this aquifer, and that long-term microcosm experiments (100s days) may be necessary to correctly interpret contaminant biodegradation potential in aquifers to support site management decisions.     

Cation exchange in a glacial till drumlin at a road salt storage facility

At a former wood preservation plant severely contaminated with coal tar oil, in situ bulk attenuation and biodegradation rate constants for several monoaromatic (BTEX) and polyaromatic hydrocarbons (PAH) were determined using (1) classical first order decay models, (2) Michaelis–Menten degradation kinetics (MM), and (3) stable carbon isotopes, for o-xylene and naphthalene. The first order bulk attenuation rate constant for o-xylene was calculated to be 0.0025 d^− 1 and a novel stable isotope-based first order model, which also accounted for the respective redox conditions, resulted in a slightly smaller biodegradation rate constant of 0.0019 d^− 1. Based on MM-kinetics, the o-xylene concentration decreased with a maximum rate of k_max = 0.1 µg/L/d. The bulk attenuation rate constant of naphthalene retrieved from the classical first order decay model was 0.0038 d^− 1. The stable isotope-based biodegradation rate constant of 0.0027 d^− 1 was smaller in the reduced zone, while residual naphthalene in the oxic part of the plume further downgradient was degraded at a higher rate of 0.0038 d^− 1. With MM-kinetics a maximum degradation rate of k_max = 12 µg/L/d was determined. Although best fits were obtained by MM-kinetics, we consider the carbon stable isotope-based approach more appropriate as it is specific for biodegradation (not overall attenuation) and at the same time accounts for the dominant electron-accepting process. For o-xylene a field based isotope enrichment factor ε_field of − 1.4 could be determined using the Rayleigh model, which closely matched values from laboratory studies of o-xylene degradation under sulfate-reducing conditions.     

Residential runoff as a source of pyrethroid pesticides to urban creeks

Pyrethroid pesticides occur in urban creek sediments at concentrations acutely toxic to sensitive aquatic life. To better understand the source of these residues, runoff from residential neighborhoods around Sacramento, California was monitored over the course of a year. Pyrethroids were present in every sample. Bifenthrin, found at up to 73 ng/L in the water and 1211 ng/g on suspended sediment, was the pyrethroid of greatest toxicological concern, with cypermethrin and cyfluthrin of secondary concern. The bifenthrin could have originated either from use by consumers or professional pest controllers, though the seasonal pattern of discharge from the drain was more consistent with professional use as the dominant source. Stormwater runoff was more important than dry season irrigation runoff in transporting pyrethroids to urban creeks. A single intense storm was capable of discharging as much bifenthrin to an urban creek in 3 h as that discharged over 6 months of irrigation runoff.     

How Green is Too Green? Public Opinion of What Constitutes Undesirable Algae Levels in Streams1

Abstract: A public opinion survey was carried out in Montana to ascertain if the public identifies a level of benthic (bottom‐attached) river and stream algae that is undesirable for recreation. The survey had two parts; an On‐River survey and a By‐Mail survey. The On‐River survey was conducted via 44 trips randomly scheduled throughout the state during which recreators were interviewed in‐person at the stream. Selection of stream segments and survey dates/times was based on known, statewide recreational use patterns. By‐Mail survey forms were sent to 2,000 individuals randomly selected from Montana’s Centralized Voter File (CVF) available from the Montana Secretary of State. The CVF was current through 2004 and represented over 85% of the state’s eligible voting population. In both surveys, eight randomly ordered photographs depicting varying levels of stream benthic algae were presented, and participants were asked if the algae level shown was desirable or undesirable for recreation. Survey form design, selection of photographs, and pretesting followed acceptable protocols that limited unintentional bias through survey execution. There were 433 returned forms (389 complete) for the By‐Mail survey, while the On‐River survey documented 563 interviews. In both surveys, as benthic algal chlorophyll a (Chl a) levels increased, desirability for recreation decreased. (Other measures of benthic algae biomass are presented as well.) For the public majority, mean benthic Chl a levels ≥200 mg/m² were determined to be undesirable for recreation, whereas mean levels ≤150 mg Chl a/m² were found to be desirable. Error rates were within the survey’s statistical design criteria (≤5%). The largest potential error source was nonresponse in the By‐Mail survey; however, the population represented by nonrespondents would have to exhibit profoundly different perceptions of river and stream algae to meaningfully alter the results. Results support earlier work in the literature suggesting 150 mg Chl a/m² represents a benthic algae nuisance threshold.     

Assessment Tools for Urban Catchments: Defining Observable Biological Potential1

Abstract: Urbanization represents a strong and increasingly more prevalent impact on stream quality worldwide. One of the characteristic effects of increased urbanization is a consistent decline in biological stream condition. The characterization of this biological degradation with increasing urbanization presents a number of advantages for the study and management of urban streams and catchments. In this paper, the limitation of biological condition with urbanization, called observed biological potential, is characterized. Using an urban intensity index and a biological index developed specifically for urban systems in the Baltimore, Maryland; Cleveland, Ohio; and San Jose, California regions, two principal techniques were compared (quantile regression and bin regression) to define observed biological potential along urban gradients. Quantile regression was selected as the preferable tool for describing observed biological potential given the consistency with which it can be applied and its statistical efficiency, however, bin quantile regression performed similarly. Having identified a numeric approximation of observed biological potential, two methods for identifying factors related to distance from potential as a way of identifying critical environmental factors affecting biological condition in urban areas were explored. The results of this work can be used for identifying benchmarks for urban stream biological condition, identifying limiting catchment characteristics, and prioritizing urban stream management efforts.     

Constraints to Watershed Planning: Group Structure and Process1

Floress, Kristin, Jean C. Mangun, Mae A. Davenport, and Karl W.J. Williard, 2009. Constraints to Watershed Planning: Group Structure and Process. Journal of the American Water Resources Association (JAWRA) 45(6):1352‐1360. Abstract: The roles that agencies and other partners play in collaborative watershed management are not always clearly identified. Key factors contributing to group‐level outcomes in watershed groups include both structural and procedural elements. Structural elements include membership systems, project partners, and funding, while procedural elements include leadership, shared vision, and mission development. The current research reports on a case study conducted with a Midwestern watershed group that received Clean Water Act Section 319 funds to undertake a watershed planning process. Data come from focus groups, interviews, public comments, and meeting observation, and were analyzed using grounded theory. Findings of this study indicate that homogenous skill set, discord over group and partner roles, and failed problem identification contributed to the organizational inertia experienced by the watershed group. Implications of this research for groups receiving 319 funds are provided.     

Beyond the Prevention of Harm: Animal Disease Policy as a Moral Question

European animal disease policy seems to find its justification in a “harm to other” principle. Limiting the freedom of animal keepers—e.g., by culling their animals—is justified by the aim to prevent harm, i.e., the spreading of the disease. The picture, however, is more complicated. Both during the control of outbreaks and in the prevention of notifiable, animal diseases the government is confronted with conflicting claims of stakeholders who anticipate running a risk to be harmed by each other, and who ask for government intervention. In this paper, we first argue that in a policy that aims to prevent animal diseases, the focus shifts from limiting “harm” to weighing conflicting claims with respect to “risks of harm.” Therefore, we claim that the harm principle is no longer a sufficient justification for governmental intervention in animal disease prevention. A policy that has to deal with and distribute conflicting risks of harm needs additional value assumptions that guide this process of assessment and distribution. We show that currently, policies are based on assumptions that are mainly economic considerations. In order to show the limitations of these considerations, we use the interests and position of keepers of backyard animals as an example. Based on the problems they faced during and after the recent outbreaks, we defend the thesis that in order to develop a sustainable animal disease policy other than economic assumptions need to be taken into account.     

Fundamental Moral Attitudes to Animals and Their Role in Judgment: An Empirical Model to Describe Fundamental Moral Attitudes to Animals and Their Role in Judgment on the Culling of Healthy Animals During an Animal Disease Epidemic

In this paper, we present and defend the theoretical framework of an empirical model to describe people’s fundamental moral attitudes (FMAs) to animals, the stratification of FMAs in society and the role of FMAs in judgment on the culling of healthy animals in an animal disease epidemic. We used philosophical animal ethics theories to understand the moral basis of FMA convictions. Moreover, these theories provide us with a moral language for communication between animal ethics, FMAs, and public debates. We defend that FMA is a two-layered concept. The first layer consists of deeply felt convictions about animals. The second layer consists of convictions derived from the first layer to serve as arguments in a debate on animal issues. In a debate, the latter convictions are variable, depending on the animal issue in a specific context, time, and place. This variability facilitates finding common ground in an animal issue between actors with opposing convictions.     

A statistical analysis of the carbon dioxide capture process

Post combustion carbon dioxide (CO₂) capture is one of the most commonly adopted technologies for reducing industrial CO₂ emissions, which is now an important goal given the widespread concern over global warming. Research on amine-based CO₂ capture has mainly focused on improving effectiveness and efficiency of the CO₂ capture process. Our research work focuses on studying the relationships among the significant parameters influencing CO₂ production because an enhanced understanding of the intricate relationships among the parameters involved in the process is critical for improving efficiency of the CO₂ capture process. This paper presents a statistical study that explores the relationships among parameters involved in the amine-based post combustion CO₂ capture process at the International Centre for CO₂ Capture (ITC) located in Regina, Saskatchewan of Canada. A multiple regression technique has been applied for analysis of data collected at the CO₂ capture pilot plant at ITC. The parameters have been carefully selected to avoid issues of multicollinearity, and four mathematical models among the key parameters identified have been developed. The models have been tested, and accuracy of the models is found to be satisfactory. The models developed in this study describe part of the CO₂ capture process and can help to predict performance of the CO₂ capture process at ITC under different conditions. Some results from a preliminary validation process will also be presented.     

Compatible Blends of Zein and Polyvinylpyrrolidone

Blends of zein and polyvinylpyrrolidone (PVP) were compared based on their tensile properties, thermal properties and morphology. Zein was blended with polyvinylpyrrolidone of varying molecular weights (10, 55, and 1,300 kDa) and films were cast from ethanol solutions. Films cast using the higher molecular weight polymers showed an improvement in tensile strength, up to a 24% increase, compared to control. Differential scanning calorimetry data for the blends showed single T_m and T_g values of an intermediate value between those of zein and PVP control samples. Field emission scanning electron microscopy images show no obvious inhomogeneities, and confocal fluorescence microscopy showed no decreased uniformity in the PVP/zein films compared to control. Electrospun fibers of the zein/PVP blends were also obtained. These findings suggest that zein and polyvinylpyrrolidone combine to form a compatible blend, the first such blend of zein with a synthetic polymer.