Design standards and technology adoption: welfare effects of increasing environmental fines when the number of firms is endogenous

Environmental Economics and Policy Studies - This paper examines the consequences of an increase in the expected fine for non-compliance with an environmental design standard for an industry with...     

Risk for estrogen-dependent diseases in relation to phthalate exposure and polymorphisms of CYP17A1 and estrogen receptor genes

Evidence has shown that polymorphisms of various genes known to be involved in estrogen biosynthesis and function are associated with estrogen-dependent diseases (EDDs). These genes include CYP17A1, estrogen receptor 1 (ESR1), and 2 (ESR2). Phthalates are considered estrogenic endocrine disruptors, and recent research has suggested that they may act as a risk factor for EDDs. However, extremely few studies have assessed the effects of gene–environment interaction on these diseases. We recruited 44 patients with endometriosis or adenomyosis, 36 patients with leiomyoma, and 69 healthy controls from a medical center in Taiwan between 2005 and 2007. Urine samples were collected and analyzed for seven phthalate metabolites using liquid chromatography tandem mass spectrometry. Peripheral lymphocytes were used for DNA extraction to determine the genotype of CYP17A1, ESR1, and ESR2. Compared to controls, patients with leiomyoma had significantly higher levels of total urinary mono-ethylhexyl phthalate (ΣMEHP) (52.1 vs. 29.6 μg/g creatinine, p?=?0.040), mono-n-butyl phthalate (MnBP) (75.4 vs. 51.3 μg/g creatinine, p?=?0.019), and monoethyl phthalate (MEP) (103.7 vs. 59.3 μg/g creatinine, p?=?0.031). In contrast, patients with endometriosis or adenomyosis showed a marginally increased level of urinary MEHP only. Subjects who were homozygous for both the ESR1 C allele (rs2234693) and CYP17A1 C allele (rs743572) showed a significantly increased risk for leiomyoma (OR?=?19.8; 95 % CI, 1.70; 231.5; p?=?0.017) relative to subjects with other genotypes of ESR1 and CYP17A1. These results were obtained after adjusting for age, cigarette smoking, MEHP level, GSTM1 genotype and other covariates. Our results suggested that both CYP17A1 and ESR1 polymorphisms may modulate the effects of phthalate exposure on the development of leiomyoma.     

Recharge and Flow in the Medicine Lake Volcano–Fall River Springs Groundwater Basin,California

Isotopic measurements of the 34 m³/s discharge from the Fall River Springs of northern California indicate recharge from 50 km upgradient in high elevation regions of Medicine Lake Volcano. Age determinations suggest less than 20-year travel time. Data demonstrate Klamath Basin further north cannot be a recharge source. Mass balance calculations support that annual precipitation on the volcano supplies observed spring discharge, requiring 50%–75% recharge rates. Radiocarbon and δ¹³C of dissolved inorganic carbon indicate 30%–40% is derived from magmatic CO₂. Measured excess ³He is also consistent with the presence of magmatic gas derived from the Quaternary Age Medicine Lake Volcano.     

Physicochemical and biological quality of soil in hexavalent chromium-contaminated soils as affected by chemical and microbial remediation

Chemical and microbial methods are the main remediation technologies for chromium-contaminated soil. These technologies have progressed rapidly in recent years; however, there is still a lack of methods for evaluating the chemical and biological quality of soil after different remediation technologies have been applied. In this paper, microbial remediation with indigenous bacteria and chemical remediation with ferrous sulphate were used for the remediation of soils contaminated with Cr(VI) at two levels (80 and 1,276 mg kg^?1) through a column leaching experiment. After microbial remediation with indigenous bacteria, the average concentration of water-soluble Cr(VI) in the soils was reduced to less than 5.0 mg kg^?1. Soil quality was evaluated based on 11 soil properties and the fuzzy comprehensive assessment method, including fuzzy mathematics and correlative analysis. The chemical fertility quality index was improved by one grade using microbial remediation with indigenous bacteria, and the biological fertility quality index increased by at least a factor of 6. Chemical remediation with ferrous sulphate, however, resulted in lower levels of available phosphorus, dehydrogenase, catalase and polyphenol oxidase. The result showed that microbial remediation with indigenous bacteria was more effective for remedying Cr(VI)-contaminated soils with high pH value than chemical remediation with ferrous sulphate. In addition, the fuzzy comprehensive evaluation method was proven to be a useful tool for monitoring the quality change in chromium-contaminated soils.     

柴油低温临界吸收法回收装车挥发油气

研究了采用柴油低温临界吸收法回收装车挥发油气的效果。实验结果表明：按装车挥发油气中的总烃体积分数为20.88%、装车挥发油气流量为280 m³/h、年运行时间为2 668 h计,装置年回收油气量为291 t,装置年最大运行功率为206.770 MW,装置投资回收期为3 a;处理后净化气中的总烃体积分数为1.24%,排放质量浓度低于25 g/m³,油气回收率达95%。处理后净化气满足GB 20950—2007《储油库大气污染物排放标准》,取得了较好的环保效益和经济效益。     

3种生物质炭对活性艳蓝KN-R的吸附简

选择由玉米秸秆、稻壳和稻草秸秆在825℃制成的生物质炭作为吸附剂,通过模拟实验,研究其对溶液中活性艳蓝KN-R的吸附特性,考察了pH值、时间、溶液初始浓度和生物质炭用量对吸附效果的影响。结果表明,当pH为2.0时,玉米秸秆炭和稻壳炭对活性艳蓝的吸附量均达到最大,而pH对稻草秸秆炭的影响不大;三者达到吸附平衡的时间分别为180、300和360 min,最大吸附量分别为114.05、54.60和68.19 mg/g。等温吸附过程可以用Langmuir方程来描述;动力学实验表明,吸附过程更符合拟二级动力学模型;热力学数据分析发现,吸附过程是自发进行的吸热过程。     

A full-scale sequencing batch reactor system for swine wastewater treatment

A full-scale sequencing batch reactor (SBR) system was evaluated for its ability to remove carbon and nitrogen from swine wastewater. The SBR was operated on four, six-hour cycles each day, with each cycle consisting of 4.5 hours of “React,” 0.75 hours of “Settling”, 0.75 hours for “Draw” and “Fill.” Within each cycle, an amount of wastewater equivalent to about 5% of the reactor volume (5,500 litres) was removed and added. The SBR system was able to remove 82% of biochemical oxygen demand (BOD) and more than 75% of nitrogen. Even though the SBR effluent, with an average effluent BOD₅ of about 588 mg L^{? 1}, did not meet the discharge criteria, it enabled a reduction of the land base required for land application of swine wastewater by about 75%. Results indicated that the SBR system was a viable method for the treatment of swine wastewater.     

Treating solid dairy manure using microwave-enhanced advanced oxidation process

The microwave enhanced advanced oxidation process (MW/H₂O₂-AOP) was used to treat separated solid dairy manure for nutrient release and solids reduction. The MW/H₂O₂-AOP was conducted at a microwave temperature of 120°C for 10 minutes, and at three pH conditions of 3.5, 7.3 and 12. The hydrogen peroxide dosage at approximately 2 mL per 1% TS for a 30 mL sample was used in this study, reflecting a range of 0.53–0.75 g H₂O₂/g dry sludge. The results indicated that substantial quantities of nutrients could be released into the solution at pH of 3.5. However, at neutral and basic conditions only volatile fatty acids and soluble chemical oxygen demand could be released. The analyses on orthophosphate, soluble chemical oxygen demands and volatile fatty acids were re-examined for dairy manure. It was found that the orthophosphate concentration for untreated samples at a higher % total solids (TS) was suppressed and lesser than actual. To overcome this difficulty, the initial orthophosphate concentration had to be measured at 0.5% TS.     

Microwave enhanced advanced oxidation process for treating dairy manure at low pH

This study investigated the treatment of dairy manure using the microwave enhanced advanced oxidation process (MW-AOP) at pH 2. An experimental design was developed based on a statistical program using response surface methodology to explore the effects of temperature, hydrogen peroxide dosage and heating time on sugar production, nutrient release and solids destruction. Temperature, hydrogen peroxide dosage and acid concentration were key factors affecting reducing sugar production. The highest reducing sugar yield of 7.4% was obtained at 160°C, 0 mL, 15 min heating time, and no H₂O₂ addition. Temperature was a dominant factor for an increase of soluble chemical oxygen demand (SCOD) in the treated dairy manure. The important factors for volatile fatty acids (VFA) production were microwave temperature and hydrogen peroxide dosage. Temperature was the most important parameter, and heating time, to a lesser extent affecting orthophosphate release. Heating time, hydrogen peroxide dosage and temperature were significant factors for ammonia release. There was a maximum of 96% and 196% increase in orthophosphate and ammonia concentration, respectively at 160°C, 0.5 mL H₂O₂ and 15 min heating time. The MW-AOP is an effective method in dairy manure treatment for sugar production, nutrient solubilisation, and solids disintegration.     

Assessing Sorbents for Mercury Control in Coal-Combustion Flue Gas

Abstract

Sorbent injection for Hg control is one of the most promising technologies for reducing Hg emissions from power-generation facilities, particularly units that do not require wet scrubbers for SO₂ control. Since 1992, EPRI has been assessing the performance of Hg sorbents in pilot-scale systems installed at full-scale facilities. The initial tests were conducted on a 5000-acfm (142-m³/min) pilot baghouse. Screening potential sorbents at this scale required substantial resources for installation and operation and did not provide an opportunity to characterize sor-bents over a wide temperature range.

Data collected in the laboratory and in field tests indicate that sorbents are affected by flue gas composition and temperature. Tests carried out in actual flue gas at a number of power plants also have shown that sorbent performance can be site-specific. In addition, data collected at a field site often are different from data collected in the laboratory, with simulated flue gas mixed to match the major components in the site’s gas. To effectively estimate the costs of Hg sorbent systems at different plants, a measure of sorbent performance in the respective flue gases must be obtained. However, injection testing at multiple facilities with large pilot systems is not practical.

Over the past five years, fixed-bed characterization testing, modeling studies, and bench-scale injection testing have been undertaken to develop a low-cost technique to characterize sorbent performance in actual flue gas and subsequently to project normalized costs for Hg removal prior to full-scale demonstration. This article describes the techniques used and summarizes field-testing results from two plants burning Powder River Basin (PRB) coal for commercial activated carbon and several other sorbent types. Full-scale projections based on the results and data collected on larger-scale systems also are included.