Correction to: Experimental performance evaluation of an impinging jet with fins type solar air heater

Environmental Science and Pollution Research - A Correction to this paper has been published: https://doi.org/10.1007/s11356-021-12458-z     

Physiological responses of some tree species under roadside automobile pollution stress around city of Haridwar,India

Studies were carried out to determine the physiological response of few economically important tree species viz., Mango (Mangifera indica), Eucalyptus citriodora, Sagon (Tectona grandis) and Sal (Shorea robusta) to roadside automobile pollution during 2004–2005. By determining some physiological parameters, which included chlorophyll a, and b, total chlorophyll, carotenoids, ascorbic acid, pH and relative water content, impact of automobile exhaust on these species was assessed. The data obtained were further analyzed by using one-way ANOVA and a significant change in all these parameters was found in the leaf samples collected from road side trees, exposed to automobile exhausts in comparison to control. Higher value of air pollution tolerance index (APTI) was recorded for S. robusta (9.02) while the minimum value of APTI was recorded for M. indica (6.76).     

Rural energy transitions in developing countries: a case of the Uttam Urja initiative in India

In most developing countries, at the household level, traditional burning of biomass or use of inefficient technologies for domestic applications like lighting is common, triggering concerns related to fuel or technology switching. The paper focuses on opportunities to promote cleaner energy options through development of value chains delivering improved energy efficiency and access in developing countries. We discuss the example of Uttam Urja, a field project involving the dissemination of photovoltaic lighting technologies in rural areas of India. We focus on the challenges of introducing radical innovations into the residential energy sector in developing countries. For the purpose of this paper the Uttam Urja project is conceptualized as an ‘experiment’ and analysed using the Strategic Niche Management (SNM) framework. The paper emphasizes that to effect socio-technical transitions to clean energy options on the ground, it is desirable to focus on technology customization and innovative financing to cater to the needs and concerns of end users.     

Rice and wheat straw ashes: Characterization and modeling of pretilachlor sorption kinetics and adsorption isotherm

The rice straw ash (RSA) and wheat straw ash (WSA) were explored as low cost adsorbent for pretilachlor removal from water. The ashes were characterized and sorption behavior of pretilachlor was evaluated. Kinetics study suggested that the modified Elovich model best explained the pretilachlor sorption on both the ashes. The adsorption data were analyzed using 2-, 3- and 4-parameter models and nine error functions were used to compute the best fit isotherm by nonlinear regression analysis. The pretilachlor was more sorbed onto the RSA (22.0–92.2%) than the WSA (11.4–61.4%) and percent adsorption decreased with increase in the herbicide concentration in solution. Isotherm model optimization analysis suggested that the Freundlich and the Temkin isotherms were the best models to predict the pretilachlor adsorption onto the RSA and the WSA. The error analysis suggested that the reciprocal of the observed squared (ROS) and the reciprocal of the predicted squared (RPS) error functions provided the best determination of the adsorption constants for the Freundlich and the Temkin isotherms, respectively. The RSA, which exhibited higher pretilachlor sorption potential, can be utilized as low cost adsorbent for pesticide removal from contaminated water.     

An integrated tool to assess the role of new planting in PM10 capture and the human health benefits: A case study in London

The role of vegetation in mitigating the effects of PM₁₀ pollution has been highlighted as one potential benefit of urban greenspace. An integrated modelling approach is presented which utilises air dispersion (ADMS-Urban) and particulate interception (UFORE) to predict the PM₁₀ concentrations both before and after greenspace establishment, using a 10 × 10 km area of East London Green Grid (ELGG) as a case study. The corresponding health benefits, in terms of premature mortality and respiratory hospital admissions, as a result of the reduced exposure of the local population are also modelled. PM₁₀ capture from the scenario comprising 75% grassland, 20% sycamore maple (Acer pseudoplatanus L.) and 5% Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) was estimated to be 90.41 t yr⁻¹, equating to 0.009 t ha⁻¹ yr⁻¹ over the whole study area. The human health modelling estimated that 2 deaths and 2 hospital admissions would be averted per year.     

Hexavalent chromium reduction and plant growth promotion by Staphylococcusarlettae strain Cr11

Cr(VI), a mutagenic and carcinogenic pollutant in industrial effluents, was effectively reduced by an indigenous tannery effluent isolate Staphylococcus arlettae strain Cr11 under aerobic conditions. The isolate could tolerate Cr(VI) up to 2000 and 5000 mg L⁻¹ in liquid and solid media respectively. S. arlettae Cr11 effectively reduced 98% of 100 mg L⁻¹ Cr(VI) in 24 h. Reduction for initial Cr(VI) concentrations of 500 and 1000 mg L⁻¹ was 98% and 75%, respectively in 120 h. The isolate was also positive for siderophore, indole acetic acid, ammonia and catalase production, phosphate solubilization and biofilm formation in the presence and absence of Cr(VI). The isolate showed halotolerance (10% NaCl) and cross tolerance to other toxic heavy metals such as Hg²⁺, Ni²⁺, Cd²⁺ and Pb²⁺. Bacterial inoculation of Triticum aestivum in controlled petri dish and soil environment showed significant increase in percent germination, root and shoot length as well as dry and wet weight in Cr(VI) treated and untreated samples. This is the first report of simultaneous Cr(VI) reduction and plant growth promotion for a S. arlettae strain.     

Integrated bioleaching of copper metal from waste printed circuit board—a comprehensive review of approaches and challenges

Waste electrical and electronic equipment (e-waste) is the most rapidly growing waste stream in the world, and the majority of the residues are openly disposed of in developing countries. Waste printed circuit boards (WPCBs) make up the major portion of e-waste, and their informal recycling can cause environmental pollution and health risks. Furthermore, the conventional disposal and recycling techniques—mechanical treatments used to recover valuable metals, including copper—are not sustainable in the long term. Chemical leaching is rapid and efficient but causes secondary pollution. Bioleaching is a promising approach, eco-friendly and economically feasible, but it is slower process. This review considers the recycling potential of microbes and suggests an integrated bioleaching approach for Cu extraction and recovery from WPCBs. The proposed recycling system should be more effective, efficient and both technically and economically feasible.     

Exposure-based ecotoxicity assessment of Co3O4 nanoparticles in marine microalgae

Environmental Science and Pollution Research - The exposure-effect study was conducted to evaluate the effect of Co3O4 nanoparticles on Tetraselmis suecica. The growth suppressing effect has been...     

Agro-waste biosorbents: Effect of physico-chemical properties on atrazine and imidacloprid sorption

Low cost agro-waste biosorbents namely eucalyptus bark (EB), corn cob (CC), bamboo chips (BC), rice straw (RS) and rice husk (RH) were characterized and used to study atrazine and imidacloprid sorption. Adsorption studies suggested that biosorbents greatly varied in their pesticide sorption behaviour. The EB was the best biosorbent to sorb both atrazine and imidacloprid with K_F values of 169.9 and 85.71, respectively. The adsorption isotherm were nonlinear in nature with slope (1/n) values <1. The Freundlich constant Correlating atrazine/imidacloprid sorption parameter [K_F.(1/n)] with the physicochemical properties of the biosorbents suggested that atrazine adsorption correlated significantly to the aromaticity, polarity, surface area, fractal dimension, lacunarity and relative C-O band intensity parameters of biosorbents. Probably, both physisorption and electrostatic interactions were responsible for the pesticide sorption. The eucalyptus bark can be exploited as low cost adsorbent for the removal of these pesticides as well as a component of on-farm biopurification systems.     

Waste management policies for industrial symbiosis development: case studies in European countries

Industrial symbiosis (IS) emerged as a self-organizing business strategy among firms that are willing to cooperate to improve their economic and environmental performance. The adoption of such cooperative strategies relates to increasing costs of waste management, most of which are driven by policy and legislative requirements.Development of IS depends on an enabling context of social, informational, technological, economical and political factors. The power to influence this context varies among the agents involved such as the government, businesses or coordinating entities. Governmental intervention, as manifested through policies, could influence a wider range of factors; and we believe this is an area which is under-researched.This paper aims to critically appraise the waste policy interventions from supra-national to sub-national levels of government. A case study methodology has been applied to four European countries i.e. Denmark, the UK, Portugal and Switzerland, in which IS emerged or is being fostered.The findings suggest that there are commonalities in policy instruments that may have led to an IS enabling context. The paper concludes with lessons learnt and recommendations on shaping the policy context for IS development.