Source apportionment of fine particles in Tennessee using a source-oriented model

Source apportionment of fine particles (PM2.5, particulate matter < 2 microm in aerodynamic diameter) is important to identify the source categories that are responsible for the concentrations observed at a particular receptor. Although receptor models have been used to do source apportionment, they do not fully take into account the chemical reactions (including photochemical reactions) involved in the formation of secondary fine particles. Secondary fine particles are formed from photochemical and other reactions involving precursor gases, such as sulfur dioxide, oxides of nitrogen, ammonia, and volatile organic compounds. This paper presents the results of modeling work aimed at developing a source apportionment of primary and secondary PM2.5. On-road mobile source and point source inventories for the state of Tennessee were estimated and compiled. The national emissions inventory for the year 1999 was used for the other states. U.S. Environmental Protection Agency Models3/Community Multi-Scale Air Quality modeling system was used for the photochemical/secondary particulate matter modeling. The modeling domain consisted of a nested 36-12-4-km domain. The 4-km domain covered the entire state of Tennessee. The episode chosen for the modeling runs was August 29 to September 9, 1999. This paper presents the approach used and the results from the modeling and attempts to quantify the contribution of major source categories, such as the on-road mobile sources (including the fugitive dust component) and coal-fired power plants, to observed PM2.5 concentrations in Tennessee. The results of this work will be helpful in policy issues targeted at designing control strategies to meet the PM2.5 National Ambient Air Quality Standards in Tennessee.     

Kinetic and adsorption study of acid dye removal using activated carbon

The adsorption of three acid dyes, Acid Red 97, Acid Orange 61 and Acid Brown 425 onto activated carbon was studied for the removal of acid dyes from aqueous solutions at room temperature (25 degrees C). The adsorption of each dye with respect to contact time was then measured to provide information about the adsorption characteristics of activated carbon. The rates of adsorption were found to conform to the pseudo-second-order kinetics with a good correlation. The experimental isotherms obtained, except for Acid Orange 61 studied in mixture, were of the S-type in terms of the classification of Giles and co-workers. The best fit of the adsorption isotherm data was obtained using the Freundlich model. When a comparative study was made of the results obtained with single and mixed dyes, it can be seen that some of them affect others and modify their behavior in the adsorption process. The results indicate that activated carbon could be employed for the removal of dyes from wastewater.     

Complexing capacity of natural waters carrying a great amount of suspended matter

The cadmium binding properties of waters of the superior section of the Rio de la Plata estuarine were determined over a three-year period. Samples were collected at different hydrodynamic conditions. The complexing capacity was determined by square wave anodic stripping voltammetry (SWASV). Titration curve data were analyzed using a multivariable regression. Suspended particulate matter (SPM) was identified by XR diffraction and FTIR. These analyses showed that SPM principal components are clays (illite, montmorillonite and chlorite). The study was applied to the untreated, filtered and centrifuged fractions of each sample at the pH of the natural waters and at pH 1. The results show that the contribution of dissolved organic matter to the complexing capacity is negligible when compared with SPM. At natural pH, the complexing capacity of filtered and untreated fractions can be described by considering two kinds of binding sites. The associated conditional binding constants are independent of the concentration of suspended matter. Their average logarithms are ca. 6.5 and ca. 4.4. The total concentration of binding sites (S(T)) is in microM range, which is about three orders of magnitude higher than that reported for most of the studied estuaries. This difference is explained on the basis of the great amount of SPM. Hydrodynamic conditions produce variations in the concentration and composition of the SPM. At pH 1 samples still exhibit an important complexing capacity with only one binding site with log K(cond) ca. 5.4. These differences could be attributed to superficial modifications that take place at very low pH.     

Acetylcholinesterase-polyaniline biosensor investigation of organophosphate pesticides in selected organic solvents

The behavior of an amperometric organic-phase biosensor consisting of a gold electrode modified first with a mercaptobenzothiazole self-assembled monolayer, followed by electropolymerization of polyaniline in which acetylcholinesterase as enzyme was immobilized, has been developed and evaluated for organophosphorous pesticide detection. The voltammetric results have shown that the formal potential shifts anodically as the Au/MBT/PANI/AChE/PVAc thick-film biosensor responded to acetylthiocholine substrate addition under anaerobic conditions in selected organic solvent media containing 2% v/v 0.05 M phosphate buffer, 0.1 M KCl (pH 7.2) solution. Detection limits in the order of 0.147 ppb for diazinon and 0.172 ppb for fenthion in acetone-saline phosphate buffer solution, and 0.180 ppb for diazinon and 0.194 ppb for fenthion in ethanol-saline phosphate buffer solution has been achieved.     

Spatial and temporal variations and possible sources of dichlorodiphenyltrichloroethane (DDT) and its metabolites in rivers in Tianjin, China

Water, suspended solid (SS) and sediment samples were collected from nine water courses in Tianjin, China and analyzed for dichlorodiphenyltrichloroethane (DDT) and its metabolites (DDXs, including o,p'-,p,p'-DDT, DDD and DDE). The average DDX concentrations in water, SS and sediment were 59+/-30 ng l(-1), 2690+/-1940 ng g(-1)dry wt. and 340+/-930 ng g(-1)dry wt., respectively. Due to the termination of the extensive agricultural application and industrial manufacture, DDXs in river sediment decreased by one order of magnitude since 1970's and low DDT fractions in these sediments were observed. Still, DDXs in the sediments near the outlets of the major manufacturers remained relatively high attributed to the historic input. DDXs in sediment were also positively correlated with organic matter content. Spatial distributions of DDXs in SS and water was different from that in sediment. For SS, a negative correlation between DDX concentration and SS content indicated a dilution effect in many rivers. Dissolved organic carbon content was the major factor affecting DDX concentrations in water phase. Wastewater discharged from dicofol manufacturers and likely illegal agricultural application were the primary reasons causing high DDT (DDE+DDD) ratios in SS and water.     

Effects of tributyltin on the energy metabolism of pen shell (Atrina pectinata japonica)

We examined the effects of tributyltin (TBT) on aerobic and anaerobic energy metabolism of pen shell (Atrina pectinata japonica). We exposed pen shells to TBT at nominal concentrations of 0 (control) and 1.0microg/l for 72h under aerobic condition. At the end of the exposure, half of the pen shells in each treatment were wrapped in plastic wrap to simulate exposure to hypoxia and held at 25 degrees C for another 12h. The concentrations of the products of energy metabolism, namely lactate, pyruvate, fumarate and succinate, in adductor muscle were measured. The exposure to TBT under aerobic condition significantly elevated lactate, pyruvate and fumarate concentrations (p<0.001). After subsequent exposure to anaerobic condition, the mean concentration of succinate in the TBT treatment group was 64% of that in the control group, but there were no significant differences. Our results suggest that the energy metabolism of pen shell is disrupted by exposure to TBT.     

Long-term variation of PM2.5 levels and composition at rural, urban, and roadside sites in Hong Kong: Increasing impact of regional air pollution

Long-term study of air pollution plays a decisive role in formulating and refining pollution control strategies. In this study, two 12-month measurements of PM_2.5 mass and speciation were conducted in 00/01 and 04/05 to determine long-term trend and spatial variations of PM_2.5 mass and chemical composition in Hong Kong. This study covered three sites with different land-use characteristics, namely roadside, urban, and rural environments. The highest annual average PM_2.5 concentration was observed at the roadside site (58.0±2.0 μg m⁻³ (average±2σ) in 00/01 and 53.0±2.7 μg m⁻³ in 04/05), followed by the urban site (33.9±2.5 μg m⁻³ in 00/01 and 39.0±2.0 μg m⁻³ in 04/05), and the rural site (23.7±1.9 μg m⁻³ in 00/01 and 28.4±2.4 μg m⁻³ in 04/05). The lowest PM_2.5 level measured at the rural site was still higher than the United States’ annual average National Ambient Air Quality Standard of 15 μg m⁻³. As expected, seasonal variations of PM_2.5 mass concentration at the three sites were similar: higher in autumn/winter and lower in summer. Comparing PM_2.5 data in 04/05 with those collected in 00/01, a reduction in PM_2.5 mass concentration at the roadside (8.7%) but an increase at the urban (15%) and rural (20%) sites were observed. The reduction of PM_2.5 at the roadside was attributed to the decrease of carbonaceous aerosols (organic carbon and elemental carbon) (>30%), indicating the effective control of motor vehicle emissions over the period. On the other hand, the sulfate concentration at the three sites was consistent regardless of different land-use characteristics in both studies. The lack of spatial variation of sulfate concentrations in PM_2.5 implied its origin of regional contribution. Moreover, over 36% growth in sulfate concentration was found from 00/01 to 04/05, suggesting a significant increase in regional sulfate pollution over the years. More quantitative techniques such as receptor models and chemical transport models are required to assess the temporal variations of source contributions to ambient PM_2.5 mass and chemical speciation in Hong Kong.     

Lichen biomonitoring of ammonia emission and nitrogen deposition around a pig stockfarm

Effects of high ammonia emissions and nitrogen deposition were investigated on lichens around a pig stockfarm (ca. 7,000 animals) in central Italy. Four sites were selected along a transect at 200, 400, 1000 and 2500 m from the stockfarm, the diversity of epiphytic lichens was measured and transplanted thalli of Xanthoria parietina and Flavoparmelia caperata exposed, together with passive NH3 (diffusion tubes) samplers. Ammonia dramatically decreased from the centre of the stockfarm to the sampled sites, where it was correlated with bark pH. Total lichen diversity was not associated with either NH3 concentrations or bark pH, but the diversity of strictly nitrophytic species was highly correlated with both parameters. Physconia grisea was the best indicator species for NH3 pollution. Total N accumulated in X. parietina and F. caperata was correlated with NH3 concentrations.     

Source apportionment of polycyclic aromatic hydrocarbons in surface soil in Tianjin, China

Principal component analysis and multiple linear regression were applied to apportion sources of polycyclic aromatic hydrocarbons (PAHs) in surface soils of Tianjin, China based on the measured PAH concentrations of 188 surface soil samples. Four principal components were identified representing coal combustion, petroleum, coke oven plus biomass burning, and chemical industry discharge, respectively. The contributions of major sources were quantified as 41% from coal, 20% from petroleum, and 39% from coking and biomass, which are compatible with PAH emissions estimated based on fuel consumption and emission factors. When the study area was divided into three zones with distinctive differences in soil PAH concentration and profile, different source features were unveiled. For the industrialized Tanggu-Hangu zone, the major contributors were cooking (43%), coal (37%) and vehicle exhaust (20%). In rural area, however, in addition to the three main sources, biomass burning was also important (13%). In urban-suburban zone, incineration accounted for one fourth of the total.     

Phytotoxicity to and uptake of RDX by rice

Phytoremediation is an emerging strategy to remediate soils contaminated with pollutants like explosives in which plants will uptake, degrade and/or accumulate pollutants. To implement this technology on a site contaminated with RDX, we chose rice, which is able to grow in lagoons, and we tested its ability to grow in soils with high levels of RDX and to decrease RDX concentrations in soil. Rice was grown for 40 days in soil contaminated with increasing [14C]RDX concentrations. Emergence and growth were not affected by RDX. Total chlorophyll content decreased with RDX concentrations of over 500 mg kg(-1). Amounts of chlorophyll were correlated with the appearance of necrosis in leaf extremities. After 40 days, rice translocated 89% of uptaken radioactivity to leaves with 90% in leaf extremities. Analyzes of leaf extracts showed that 95% of radioactivity was RDX in its parent form. Necrosis appears to be a phytotoxic symptom of RDX accumulation.