Negative emissions of carbon dioxide through chemical-looping combustion (CLC) and gasification (CLG) using oxygen carriers based on manganese and iron

Carbon capture and storage (CCS) is an economically attractive strategy for avoiding carbon dioxide (CO₂) emissions from, e.g., power plants to the atmosphere. The combination of CCS and biomass combustion would result in a reduction of atmospheric CO₂, or net negative emissions, as plant growth is a form of sequestration of atmospheric carbon. Carbon capture can be achieved in a variety of ways, one of which is chemical looping. Chemical-looping combustion (CLC) and chemical looping gasification (CLG) are two promising technologies for conversion of biomass to heat and power or syngas/methane with carbon capture. There have been significant advances made with respect to CLC in the last two decades for all types of fuel, with much less research on the gasification technology. CLG offers some interesting opportunities for production of biofuels together with carbon capture and may have several advantages with respect to the bench mark indirect gasification process or dual-bed fluidized bed (DFBG) in this respect. In CLG, an oxygen carrier is used as a bed material instead of sand, which is common in indirect gasification, and this could have several advantages: (i) all generated CO₂ is present together with the syngas or methane in the fuel reactor outlet stream, thus in a concentrated stream, viable for separation and capture; (ii) the air reactor (or combustion chamber) should largely be free from trace impurities, thus preventing corrosion and fouling in this reactor; and (iii) the highly oxidizing conditions in the fuel reactor together with solid oxide surfaces should be advantageous with respect to limiting formation of tar species. In this study, two manganese ores and an iron-based waste material, LD slag, were investigated with respect to performance in these chemical-looping technologies. The materials were also impregnated with alkali (K) in order to gauge possible catalytic effects and also to establish a better understanding of the general behavior of oxygen carriers with alkali, an important component in biomass and biomass waste streams and often a precursor for high-temperature corrosion. The viability of the oxygen carriers was investigated using a synthetic biogas in a batch fluidized bed reactor. The conversion of CO, H₂, CH₄, and C₂H₄ was investigated in the temperature interval 800–950 °C. The reactivity, or oxygen transfer rate, was highest for the manganese ores, followed by the LD slag. The conversion of C₂H₄ was generally high but could largely be attributed to thermal decomposition. The K-impregnated samples showed enhanced reactivity during combustion conditions, and the Mangagran-K sample was able to achieve full conversion of benzene. The interaction of the solid material with alkali showed widely different behavior. The two manganese ores retained almost all alkali after redox testing, albeit exhibiting different migration patterns inside the particles. LD slag lost most alkali to the gas phase during testing, although some remained, possibly explaining a small difference in reactivity. In summary, the CLC and CLG processes could clearly be interesting for production of heat, power, or biofuel with negative CO₂ emissions. Manganese ores are most promising from this study, as they could absorb alkali, giving a better conversion and perhaps also inhibiting or limiting corrosion mechanisms in a combustor or gasifier.

     

Spatial characterization of the Baltic sea drainage basin and its unmonitored catchments

We present an updated, harmonized hydrologic base map of the entire Baltic Sea Drainage Basin (BSDB), including 634 subdrainage basins. The updated map has a level of detail approximately 5 to 10 times higher than the current standard and includes various spatial-aggregation possibilities of relevance for water management. All 634 subdrainage basins and their various spatial aggregations are characterized in terms of population, land cover, drainage density, and slope. We identify, quantify, and characterize, in particular, drainage basins that are unmonitored with regard to the combination of water-flow and nutrient-concentration measurements needed to monitor coastal nutrient and pollutant loading. Results indicate that out of a total BSDB population of 84 239 000 in 2002, 24% lived in unmonitored coastal drainage basins that cover 13% of the total BSDB area. A more detailed analysis of Swedish catchments indicates that Sweden has a particularly large proportion of unmonitored coastal catchment areas (20% of the total Swedish area) with high population pressures (55% of the total Swedish population), when compared with average conditions for the whole BSDB. In general, the investigated characteristics of unmonitored coastal basins vary and differ largely from those in adjacent monitored drainage basins within the BSDB.     

Facilitation in an insect-pollinated herb with a floral display dimorphism

Population context should influence pollination success and selection on floral display in animal-pollinated plants because attraction of pollinators depends not only on the characteristics of individual plants, but also on the attractiveness of co-occurring conspecifics. The insect-pollinated herb Primula farinosa is polymorphic for inflorescence height. Natural populations may include both long-scaped plants, which present their flowers well above the soil surface, and short-scaped plants, with their flowers positioned close to the ground. We experimentally tested whether seed production in short-scaped P. farinosa varied with local morph frequency and surrounding vegetation height. In tall vegetation, short-scaped plants in polymorphic populations produced more fruit and tended to produce more seeds than short-scaped plants did in monomorphic populations. In low vegetation, population composition did not significantly affect fruit and seed output of short-scaped plants. The results suggest that long-scaped plants facilitate short-scaped plants in terms of pollinator attraction and that the facilitation effect is contingent on the height of the surrounding vegetation. The documented facilitation should contribute to the maintenance of the scape length polymorphism in ungrazed areas where litter accumulates and vegetation grows tall.     

What shapes municipalities’ perceptions of fairness in windpower developments?

ABSTRACT

Siting controversies have become familiar in windpower development. Process and outcome fairness in the form of economic benefits to local communities and inclusion in decision-making processes are recognised as important elements in local acceptance of windpower installations. To these, we add the concept of “relative fairness” influencing perceptions of overall fairness. In this article, we examine why Norwegian municipalities agree to host windpower, and the role of process, outcome and relative fairness in this decision. Municipalities are central in providing welfare services, and in ensuring a viable local economy and local workplaces. Process fairness is important, as is evident when municipalities have little influence in the detailed planning of the plants. Also, outcome fairness, in the form of economic compensation – particularly through property tax – is decisive for positive attitudes towards windfarms, as municipalities can strengthen their role as welfare providers and boost local economic activities. Less emphasised are the effects on global climate and national climate goals. However, effects on local landscape and nature are also important for municipalities, as became clear when the national government proposed withdrawing the municipalities’ possibilities of levying property taxes. The municipalities argue that it is only fair to receive something in return for hosting windmills, and relative fairness is important to their argument for equal treatment regarding hydro- and wind-power electricity production in the form of a natural resource tax.     

Immersed solid phase microextraction to measure chemical activity of lipophilic organic contaminants in fatty tissue samples

It is known that solid phase microextraction (SPME) fibers can be equilibrated directly within environmental matrices such as water, sediment and soil slurries. Here it is shown that this method can also be applied to biological tissue. SPME extraction of biological matrices reportedly causes lipophilic fouling of the fiber. However, we found no significant measurement bias when combining equilibrium sampling with fiber surface cleaning. The uptake of lipophilic organic pollutants from the tissue and into the SPME fiber coating was characterized by fast equilibrium partitioning without sample depletion and without impacting the sorptive properties of the fiber. The precision of the method when applied to hexachlorobenzene and several PCB congeners in harbor porpoise blubber was 15%, which includes the variation between SPME samplings, manual injections and the instrumental analysis. A good correlation (r(2)=0.95) was obtained between SPME measurements of PCB 153 in blubber and concentrations obtained via a traditional analytical approach. These results indicate that SPME is a promising technique for measuring chemical activity in biological tissue, which would make it a useful tool for studying chemical distribution in organisms as well as biodilution and biomagnification phenomena.     

Searching efficient protection strategies for the eutrophied Gulf of Finland: the combined use of 1D and 3D modeling in assessing long-term state scenarios with high spatial resolution

An experiment combining the use of two ecosystem models was conducted to search for effective protection strategies for the Gulf of Finland (Baltic Sea). Reference and scenario simulations were first run with a one-dimensional (1D) model for seven main basins of the entire Baltic Sea until steady state was achieved. The obtained basinwise distributions of inorganic nitrogen (N) and phosphorus (P), as well as sediment labile P, were then used to initiate 5-y simulations with a three-dimensional (3D) ecosystem model. The results suggest that relatively small local load reductions (the "Finland" scenario) would improve only the state of adjacent coastal waters significantly. This would be the case, even for runs covering several decades, which clearly exceed the residence times of nutrients in the Gulf of Finland. A significant decrease from a substantial loading source to the Gulf (the "St. Petersburg" scenario) would decrease cyanobacterial biomasses in the entire Gulf of Finland and also immediately outside it. A reduction in the current Polish nutrient loads would improve the situation in the whole Baltic Proper and cause an extensive decline in cyanobacterial biomasses in the Gulf of Finland, as well. However, it would take several decades until the improvement caused by reducing loads in the "Poland" scenario is seen, while in the "St. Petersburg" scenario the corresponding time lag would only be a few years. Our results suggest that the common water protection policy in the Baltic Sea region should have the largest nutrient sources as its primary target, regardless of their location and country.     

Biodegradation rates in adapted surface water can be assessed following a preadaptation period with semi-continuous operation

The paper presents a semi-continuous preexposure procedure (SCEP) for use with surface water batch simulation biodegradability tests at low test substance concentrations (0.1-100 microg/l). Simple one step batch tests are normally used first of all for determining "initial rates" characteristic of the water as sampled, as by contrast to "adapted" rates obtained as a result of exposure of the microbial community to the test compound. The aim of the SCEP is to facilitate this adaptation and to become able to estimate reproducible "adapted rates" representing a steady state situation. This is accomplished by maintaining the microbial diversity and a supply of test substance and natural substrates. Conducting a SCEP involves regular renewal of part (e.g. one third) of the test suspension (e.g. every two weeks) adding freshly collected natural water with test compound of the initial concentration. An example study was performed with aniline, 4-nitrophenol, 2,4-dichlorophenoxyacetic acid, 4-chloroaniline, and water from the urban river M?lle?. Following preadaptation lag phases were considerably reduced and much more reproducible than obtained with simple batch tests. In tests at 100 microg/l lag phases for aniline decreased from 5.2 to <1 day, 4-nitrophenol from 10 to <1 day, 2,4-dichlorophenoxyacetic acid from 24 to <1 day, and 4-chloroaniline from 88 to 9 days, respectively. Adapted rates obtained with the SCECP were roughly the same as final rates in simple batch tests with successful adaptation. The adapted rate constant is perceived as an inherent characteristic of the test compound at a specific concentration and under environmental influence (temperature, natural substrates, etc.) but with no simple links back to the original microbial population. By contrast, the initial rates in one step batch tests are determined also by the microbial population initially present in the water sampled.     

Concentrations of 137Cs in lynx (Lynx lynx) in relation to prey choice

Concentrations of (137)Cs were determined in 747 lynxes killed in Norway during the period 1986-2001. Highly variable (137)Cs concentrations and aggregated transfer coefficient values were observed, probably caused by variable (137)Cs concentrations in prey and the lynx's extensive home ranges and roaming distances. Adult lynxes had higher (137)Cs concentrations than sub-adults, and lynxes killed in regions with extensive reindeer grazing areas were more contaminated than others. A model with (137)Cs deposition density, the year lynxes were killed, age, and extent of reindeer grazing area accounted for 50% of the variability in observed (137)Cs concentrations. The analyses were equivocal regarding the influence of stomach content on (137)Cs concentrations in lynx muscle, i.e., on the lynx's specialization in prey species. Gender was not significant. Information on caesium retention in lynx and better estimates of deposition densities in lynxes' home ranges are important for further elucidation of factors influencing (137)Cs contamination in lynxes.