Variation of stabilised,microbial and biologically active carbon and nitrogen in soil under contrasting land use and agricultural management practices

Land use and agricultural practices modify both the amounts and properties of C and N in soil organic matter. In order to evaluate land use and management-dependent modifications of stable and labile C and N soil pools, (i). organic C and total N content, (ii). microbial (C(mic)) and N (N(mic)) content and (iii). C and N mineralisation rates, termed biologically active C and N, were estimated in arable, grassland and forest soils from northern and southern Germany. The C/N-ratios were calculated for the three levels (i)-(iii) and linked to the eco-physiological quotients of biotic-fixed C and N (C(mic)/C(org), N(mic)/N(t)) and biomass-specific C and N mineralisation rate (qCO(2), qN(min)). Correlations could mainly be determined between organic C, total N, C(mic), N(mic) and C mineralisation for the broader data set of the land use systems. Generally, the mineralisation activity rate at 22 degrees C was highly variable and ranged between 0.11 and 17.67 microg CO(2)-C g(-1) soil h(-1) and -0.12 and 3.81 microg (deltaNH(4)(+)+deltaNO(3)(-))-N g(-1) soil h(-1). Negative N data may be derived from both N immobilisation and N volatilisation during the experiments. The ratio between C and N mineralisation rate differed significantly between the soils ranging from 5 to 37, and was not correlated to the soil C/N ratio and C(mic)/N(mic) ratio. The C/N ratio in the 'biologically active' pool was significantly smaller in soils under conventional farming than those under organic farming systems. In a beech forest, it increased from the L, Of to the Ah horizon. The biologically active C and N pools refer to the current microbial eco-physiology and are related to the need for being C and N use efficient as indicated by metabolic qCO(2) and qN(min) quotients.     

Behavioral diversification in a young species flock of pupfish (<Emphasis Type="Italic">Cyprionodon</Emphasis> spp.): shoaling and aggressive behavior

Increasing empirical and theoretical evidence supports the idea that sympatric speciation is operating, for example, in species flocks comprising several closely related fish species within one lake. Divergent natural selection (promoting spatial and food niche partitioning) and sexual selection (assortative mating) have been identified as key selection factors in intralacustric adaptive radiations. However, the evolution of social behaviors accompanying such adaptive radiations is less well understood. Using a phylogenetically young species flock of pupfish (Cyprinodon spp.) as a model, we examined differences among six sympatric species and compared their shoaling, aggressive, and territorial behaviors with that of a sister species (C. artifrons). Despite an estimated age of the species flock of less than 8,000 years, pronounced behavioral differentiation was found. C. simus, the smallest species in the flock, shoaled more than the other species and was less aggressive and less territorial than C. beltrani. F₁-hybrids between C. simus males and C. beltrani females showed an intermediate expression of shoaling and aggressive behavior. Niche partitioning among the members of this species flock appears to be accompanied by rapid divergent evolution of social behaviors. We discuss the potential role of phenotypic plasticity and within-species variation of social behaviors for such rapid behavioral diversifications in sympatric speciation processes.     

Ecosystem services in mountain regions: experts’ perceptions and research intensity

Facing the challenges of global and regional changes, society urgently needs applicable and broadly accepted tools to effectively manage and protect ecosystem services (ES). This requires knowing which ES are perceived as important. We asked decision-makers from different thematic backgrounds to rank 25 ES on the basis of their importance for society. To test whether perceptions are varying across regions, we surveyed three Alpine regions in Austria and Italy. The ranking of importance showed a high variability amongst experts but was not influenced by region or thematic background. ES that satisfy physiological needs (‘fresh water’, ‘food’, ‘air quality regulation’) were indicated as most important. ES that relate to safety and security needs were ranked in the middle field, whereas cultural ES were perceived as less important. We used principal component analysis (PCA) to identify ES bundles based on perception of importance. In order to investigate whether research intensity follows the perceived importance, we related the interviews with a comprehensive literature review. ‘Global climate regulation’, ‘food’, ‘biodiversity’, ‘fresh water’ and ‘water quality’ were studied most often. Although ‘habitat’, ‘energy’, ‘primary production’, ‘tourism’, ‘water cycle’, and ‘local climate regulation’ were ranked as important by decision-makers, they did not receive corresponding research attention. We conclude that more interaction between research and stakeholders is needed to promote a broader application and understanding of the ES concept in practice. The use of ES bundles could help to manage its inherent complexity and facilitate its application.     

Impact of soil water regime on degradation and plant uptake behaviour of the herbicide isoproturon in different soil types

The environmental fate of the worldwide used herbicide isoproturon was studied in four different, undisturbed lysimeters in the temperate zone of Middle Europe. To exclude climatic effects due to location, soils were collected at different regions in southern Germany and analyzed at a lysimeter station under identical environmental conditions. ¹⁴C-isoproturon mineralization varied between 2.59% and 57.95% in the different soils. Barley plants grown on these lysimeters accumulated ¹⁴C-pesticide residues from soil in partially high amounts and emitted ¹⁴CO₂ in an extent between 2.01% and 13.65% of the applied ¹⁴C-pesticide. Plant uptake and ¹⁴CO₂ emissions from plants were inversely linked to the mineralization of the pesticide in the various soils: High isoproturon mineralization in soil resulted in low plant uptake whereas low isoproturon mineralization in soil resulted in high uptake of isoproturon residues in crop plants and high ¹⁴CO₂ emission from plant surfaces. The soil water regime was identified as an essential factor that regulates degradation and plant uptake of isoproturon whereby the intensity of the impact of this factor is strongly dependent on the soil type.     

Characteristic Properties of Novel Organosolv Lignin/Polylactide/Delta-Valerolactone Terpolymers

Compostable terpolymers of l-lactide (LLA), delta-valerolactone (DVL), and switchgrass organosolv lignin (OSL) were synthesized via ring-opening polymerization to improve on polylactide homopolymer properties for commercial applications. OSL has properties that improve some of the deficiencies of polylactide, including polylactide’s limitations for use in food, beverage and medical applications due to its high water permeability and low ultraviolet light (UV) blocking capabilities. DVL was incorporated into these polymers to add flexibility. The addition of DVL to the polymer had a positive effect on the tensile strain properties of the resultant terpolymer, resulting in a more flexible polymer with a reduced Young’s modulus. Water vapor transmission rate calculations confirmed that water vapor was transported more slowly through terpolymer films than through the PLLA homopolymer under varying hygrostatic conditions. While the addition of DVL increased UV permeability, the addition of even a small amount of lignin can effectively counteract this effect.     

Characteristics of Coastal Dune Topography and Vegetation in Environments Recently Modified Using Beach Fill and Vegetation Plantings,Veneto, Italy

Human actions can contribute to degradation of coastal environments or they can increase the likelihood that these environments will be restored. Beach nourishment provides a basis for restoration, but ways must be found to add habitat improvement to projects designed for shore protection. This study examines how beach nourishment projects can help reinstate dune landscapes in locations where beaches and dunes had been replaced by static shore protection structures. Dune topography and vegetation on three nourished sites on the northern Adriatic Coast of Italy are compared to a reference site to evaluate changes after beach fill was emplaced. Results reveal how nourishment projects used for shore protection can restore the space available for dunes to form, increase the likelihood of sediment transfers inland and increase the diversity of topography and vegetation. Beach raking prevents formation and growth of hummocky, incipient backshore dunes that would otherwise evolve into a naturally functioning foredune. Sand-trapping fences can speed the process of foredune development but can be counterproductive if they interfere with transport to beach grass (Ammophila littoralis) planted landward of them. Shore protection structures can provide stability and more time for dune evolution on eroding shores, resulting in greater species richness and longer retention of ecological niches. These structures need not be required if re-nourishment occurs frequently enough to provide a beach wide enough to protect against storm wave uprush.     

Assessment of heavy metal releases from the use phase of road transport in Europe

An emission inventory was compiled for heavy metal air emissions from road transport in Europe (EU-40). For the database, country-specific data was taken such as the diesel and gasoline fuel consumption per country, the content of Pb in gasoline and diesel fuel and the share of different vehicle types. For tyre and brake wear emissions, average wear rates and heavy metal contents of different materials were used to develop emission factors for tyre and brake wear. It covers exhaust emissions (Pb from gasoline and diesel) as well as non-exhaust emissions (As, Cd, Cr, Ni and Pb from the wear of brake linings and vehicle tyres). The base year is 2000, and two scenarios were developed for 2010, a business as usual (BAU) scenario and a maximum feasible technical reduction (MFTR) scenario. Both result in a remarkable decrease in Pb exhaust emissions and a rising share of non-exhaust emissions. To assess the results, the inventory is (a) compared to an inventory compiled with a top-down approach that covers the same area and years but only emissions from combustion processes and (b) added to an inventory covering all sectors for heavy metal air emissions.     

Assessment of instream foam formation and quantification of foam in effluents

Although the foam formation on surface waters nowadays is not comparable with the foam “mountains” in the 1970s, it still is an issue of water quality concern. A drawback in the discussion is the lack of methods to assess instream foam formation and foam emitted by point sources. Foam formation on a transboundary river in Austria led to an intensive study resulting in two parameters to quantify instream and emitted foam. Foam potential is introduced as emission parameter that is defined as flow rate of river water, which can foam due to an effluent’s discharge. The foam index (FI) represents a parameter to assess the foam on the river and allows a semi-quantitative differentiation between the varying foaming conditions. This publication will present the developed methods and show some results to prove their accuracy and applicability.     

Noninvasive characterization of the Trecate (Italy) crude-oil contaminated site: links between contamination and geophysical signals

The characterization of contaminated sites can benefit from the supplementation of direct investigations with a set of less invasive and more extensive measurements. A combination of geophysical methods and direct push techniques for contaminated land characterization has been proposed within the EU FP7 project ModelPROBE and the affiliated project SoilCAM. In this paper, we present results of the investigations conducted at the Trecate field site (NW Italy), which was affected in 1994 by crude oil contamination. The less invasive investigations include ground-penetrating radar (GPR), electrical resistivity tomography (ERT), and electromagnetic induction (EMI) surveys, together with direct push sampling and soil electrical conductivity (EC) logs. Many of the geophysical measurements were conducted in time-lapse mode in order to separate static and dynamic signals, the latter being linked to strong seasonal changes in water table elevations. The main challenge was to extract significant geophysical signals linked to contamination from the mix of geological and hydrological signals present at the site. The most significant aspects of this characterization are: (a) the geometrical link between the distribution of contamination and the site’s heterogeneity, with particular regard to the presence of less permeable layers, as evidenced by the extensive surface geophysical measurements; and (b) the link between contamination and specific geophysical signals, particularly evident from cross-hole measurements. The extensive work conducted at the Trecate site shows how a combination of direct (e.g., chemical) and indirect (e.g., geophysical) investigations can lead to a comprehensive and solid understanding of a contaminated site’s mechanisms.