Rhizosphere acidification and cadmium uptake by strawberry clover

Strawberry clover (Trifolium fragiferum L.) is a hardy legume found in indigenous or introduced populations throughout the world. Tolerance to saline and alkaline soils, flooding, and heavy metals make it a good prospect for reclamation projects. The research, described here, was conducted to: (i) characterize the morphological variation in plants from available seed sources, (ii) evaluate cadmium uptake and tolerances over a wide range of morphological variants, and (iii) elucidate the variability in the effects of roots on rhizosphere pH and the relationship to cadmium uptake. Seeds from selected accessions were planted in the greenhouse for comparison of morphological variation. The accessions examined had a mean height of 10.7+/-7 cm. Accessions 254916 and 237925 are tall with high rhizosphere pH values and might be useful in phytoremediation. Strawberry clover accessions were also grown hydroponically to examine differences in cadmium uptake. The ability of strawberry clover roots to change rhizosphere pH and take up cadmium was examined using culture tubes containing nutrient agar, a moderate level of cadmium, and a pH indicator dye. The results provided evidence for a negative correlation between rhizosphere pH and cadmium uptake.     

Tillage and field scale controls on greenhouse gas emissions

There is a lack of understanding of how associations among soil properties and management-induced changes control the variability of greenhouse gas (GHG) emissions from soil. We performed a laboratory investigation to quantify relationships between GHG emissions and soil indicators in an irrigated agricultural field under standard tillage (ST) and a field recently converted (2 yr) to no-tillage (NT). Soil cores (15-cm depth) were incubated at 25 degrees C at field moisture content and 75% water holding capacity. Principal component analysis (PCA) identified that most of the variation of the measured soil properties was related to differences in soil C and N and soil water conditions under ST, but soil texture and bulk density under NT. This trend became more apparent after irrigation. However, principal component regression (PCR) suggested that soil physical properties or total C and N were less important in controlling GHG emissions across tillage systems. The CO2 flux was more strongly determined by microbial biomass under ST and inorganic N content under NT than soil physical properties. Similarly, N2O and CH4 fluxes were predominantly controlled by NO3- content and labile C and N availability in both ST and NT soils at field moisture content, and NH4+ content after irrigation. Our study indicates that the field-scale variability of GHG emissions is controlled primarily by biochemical parameters rather than physical parameters. Differences in the availability and type of C and N sources for microbial activity as affected by tillage and irrigation develop different levels and combinations of field-scale controls on GHG emissions.     

Evaluation of airborne particulate matter and metals data in personal,indoor and outdoor environments using ED-XRF and ICP-MS and co-located duplicate samples

Factors and sources affecting measurement uncertainty associated with monitoring metals in airborne particulate matter (PM) were investigated as part of the Windsor, Ontario Exposure Assessment Study (WOEAS). The assessment was made using co-located duplicate samples and a comparison of two analytical approaches: ED-XRF and ICP-MS. Sampling variability was estimated using relative percent difference (RPD) of co-located duplicate samples. The comparison of ICP-MS and ED-XRF results yields very good correlations (R² ≥ 0.7) for elements present at concentrations that pass both ICP-MS and ED-XRF detection limits (e.g. Fe, Mn, Zn, Pb and Cu). PM concentration ranges (median, sample number) of 24-h indoor PM₁₀ and personal PM₁₀ filters, and outdoor PM_2.5 filters were determined to be 2.2–40.7 (11.0, n = 48) μg m^?3, 8.0–48.3 (11.9, n = 48) μg m^?3, and 17.1–42.3 (21.6, n = 18) μg m^?3, respectively. The gravimetric analytical results reveal that the variations in PM mass measurements for same-day sampling are insignificant compared to temporal or spatial variations: 92%, 100% and 96% of indoor, outdoor and personal duplicate samples, respectively, pass the quality criteria (RPD ≤ 20%). Uncertainties associated with ED-XRF elemental measurements of S, Ca, Mn, Fe and Zn for 24-h filter samples are low: 78%–100% of the duplicate samples passed the quality criteria. In the case of 24-h filter samples using ICP-MS, more elements passed the quality criteria due to the lower detection limits. These were: Li, Na, K, Ca, Si, Al, V, Fe, Mn, Co, Cu, Mo, Ag, Zn, Pb, As, Mg, Sb, Sn, Sr, Th, Ti, Tl, and U. Low air concentrations of metals (near or below instrumental detection limits) and/or inadvertent introduction of metal contamination are the main causes for excluding elements based on the pass/fail criteria. Uncertainty associated with elemental measurements must be assessed on an element-by-element basis.     

Technological improvements in automotive battery recycling

Recycling of automotive batteries for the recovery of secondary lead is extremely important in Brazil, for the country does not possess large reserves of this metal. Lead is one of the most widely used metals in the world, but it is highly toxic, posing risks for humans and for the environment if not utilized or treated adequately. Industrial waste containing lead in Brazil are classified by the Brazilian Residue Code (NBR—10004:2004) as hazardous. The lead recycling process employed by the recycling industry in Brazil is the pyrometallurgical process in a rotary furnace. This process consists of four stages: (1) grinding of the battery to separate plastic, electrolyte and lead plates; (2) lead reduction in a rotary furnace; (3) separation of metallic lead from slag; and (4) refining of recycled lead. The purpose of this work is to propose process improvements aimed primarily at increasing production output by reducing the loss of lead in slag and particulates, thereby providing a healthier work environment in line with Brazilian environmental and labor laws.     

Interspecific differences in fouling of two congeneric ascidians (Eudistoma olivaceum and E. capsulatum): is surface acidity an effective defense?

Ascidian specimens were collected from the Indian River Lagoon, Florida, USA, in November 1987. Eudistoma olivaceum (Van Name) was fouled by only two species of epifaunal invertebrates and the percent cover of epibionts was negligible. Colonies of E. capsulatum (Van Name) were fouled by up to 17 species of epifaunal invertebrates, epibionts covered an average of 12.5% of the surface area of these colonies. Extracts of E. olivaceum exhibited potent cytotoxic, antimicrobial and antiviral activity in laboratory bioassays, while the activity of extracts of E. capsulatum was insignificant. The toxicity of extracts of each ascidian was negatively related to the percent cover of fouling organisms. Surface acidity of each ascidian was positively related to the percent cover of epibionts: E. olivaceum was nearly neutral (pH=6), while E. capsulatum was highly acidic (pH=1 to 2). Larval settlement and growth of ancestrulae of the cheilostome bryozoan Bugula neritina (Linnaeus) were inhibited at very low concentrations of crude extract of E. olivaceum. Crude extracts of E. capsulatum inhibited settlement and growth of B. neritina only at concentrations of approximately an order of magnitude greater than those of E. olivaceum. Differences in the degree to which these congeneric ascidians are fouled is related to differences in the chemical defenses they possess. Acidity is not an effective inhibitor of settlement by epifaunal invertebrates.     

Using the ECLPSS software environment to build a spatially explicit component-based model of ozone effects on forest ecosystems

We have developed a modeling framework to support grid-based simulation of ecosystems at multiple spatial scales, the Ecological Component Library for Parallel Spatial Simulation (ECLPSS). ECLPSS helps ecologists to build robust spatially explicit simulations of ecological processes by providing a growing library of reusable interchangeable components and automating many modeling tasks. To build a model, a user selects components from the library, and then writes new components as needed. Some of these components represent specific ecological processes, such as how environmental factors influence the growth of individual trees. Other components provide simulation support such as reading and writing files in various formats to allow inter-operability with other software. The framework manages components and variables, the order of operations, and spatial interactions. The framework provides only simulation support; it does not include ecological functions or assumptions. This separation allows biologists to build models without becoming computer scientists, while computer scientists can improve the framework without becoming ecologists. The framework is designed to operate on multiple platforms and be used across networks via a World Wide Web-based user interface. ECLPSS is designed for use with both single processor computers for small models, and multiple processors in order to simulate large regions with complex interactions among many individuals or ecological compartments. To test Version 1.0 of ECLPSS, we created a model to evaluate the effect of tropospheric ozone on forest ecosystem dynamics. This model is a reduced-form version of two existing models: , which represents an individual tree, and , which represents forest stand growth and succession. This model demonstrates key features of ECLPSS, such as the ability to examine the effects of cell size and model structure on model predictions.     

Relative impacts at sites of dredged-material relocation in the coastal environment: a phylum-level meta-analysis approach

Phylum-level meta-analysis was applied to 192 samples from a variety of dredgings disposal and relocation sites around the coast of England and Wales. No consistent relationship was found between the disturbance status of macrobenthic communities within disposal sites and the nature or amount of dredgings disposed. Differences between samples within and outside disposal sites were generally smaller than differences between different sites and various patterns of impact were detected. It is concluded that dredgings disposal has two contrasting impacts on benthic communities. One, associated with organic enrichment, leads to communities dominated by annelids and nematodes. The other, associated with intense physical disturbance, favours large motile or armoured forms, such as bivalve molluscs and crustaceans. These effects may act antagonistically, and in a phylum-level meta-analysis may cancel each other out. None of the samples examined from offshore disposal sites was grossly disturbed, in terms of the proportional contribution to production from different phyla, and overall most samples ranged from moderately disturbed to undisturbed. The ecological impacts associated with the intertidal placement of material (beneficial use schemes) were comparable to those observed for the conventional sea disposal sites.