Environmental Integrated Assessment via Monte Carlo Simulation with a Case Study of the Mid-Atlantic Region,USA

Environmental integrated assessments are often carried out via the aggregation of a set of environmental indicators. Aggregated indices derived from the same data set can differ substantially depending upon how the indicators are weighted and aggregated, which is often a subjective matter. This article presents a method of generating aggregated environmental indices in an objective manner via Monte Carlo simulation. Rankings derived from the aggregated indices within and between three Monte Carlo simulations were used to evaluate the overall environmental condition of the study area. Other insights, such as the distribution of good or bad values of indicators at a watershed and/or a subregion, were observed in the study.     

Evaluating Participatory Modeling: Developing a Framework for Cross-Case Analysis

Participatory modeling is increasingly recognized as an effective way to assist collective decision-making processes in the domain of natural resource management. This article introduces a framework for evaluating projects that have adopted a participatory modeling approach. This evaluation framework—known as the “Protocol of Canberra”—was developed through a collaboration between French and Australian researchers engaged in participatory modeling and evaluation research. The framework seeks to assess the extent to which different participatory modeling initiatives not only modify perceptions among and interactions between participants, but also contribute to collective decision-making. The article discusses the development of the framework and it’s application to three case-studies, two from Australia and one from the Pacific Island of the Republic of Kiribati. The article concludes with some comments for future use of the framework in a range of participatory modeling contexts.     

Survey on fluoride, bromide and chloride contents in public drinking water supplies in Sicily (Italy)

Six hundred and sixty-seven water samples were collected from public drinking water supplies in Sicily and analysed for electric conductivity and for their Cl(-), Br(-) and F(-) contents. The samples were, as far as possible, collected evenly over the entire territory with an average sampling density of about one sample for every 7,600 inhabitants. The contents of Cl(-) and Br(-), ranging between 5.53 and 1,302 mg/l and between <0.025 and 4.76 mg/l respectively, correlated well with the electric conductivity, a parameter used as a proxy for water salinity. The highest values were found both along the NW and SE coasts, which we attributed to seawater contamination, and in the central part of Sicily, which we attributed to evaporitic rock dissolution. The fluoride concentrations ranged from 0.023 to 3.28 mg/l, while the highest values (only three exceeding the maximum admissible concentration of 1.5 mg/l) generally correlated either with the presence in the area of crystalline (volcanic or metamorphic) or evaporitic rocks or with contamination from hydrothermal activity. Apart from these limited cases of exceeding F(-) levels, the waters of public drinking water supplies in Sicily can be considered safe for human consumption for the analysed parameters. Some limited concern could arise from the intake of bromide-rich waters (about 3% exceeding 1 mg/l) because of the potential formation of dangerous disinfection by-products.     

Heavy metals in cooler waters in Riyadh, Saudi Arabia

Water samples were collected from 400 coolers in Riyadh area. From each cooler, one feed and one cooled water samples were collected. These samples were analyzed for trace metals like Al, Cr, Cu, Fe, Mn, Ni, Pb, and Zn by Inductively Coupled Plasma (ICP) Spectrophotometer equipped with ultrasonic nebulizer. Out of 400 coolers, water from 382 (95.50%) were found to meet World Health Organization (WHO), Saudi Arabian Standards Organization (SASO), and United States Environmental Protection Agency (USEPA) drinking water standards whereas water from 18 coolers (4.50%) were found to have elevated levels of Fe, Pb, and Ni metals. In one cooler, water was allowed to stand for 12 h and a 1 L sample collected every 2 h. All the metals mentioned above with the exception of Pb were found to increase due to standing time.     

Emissions of reduced sulphur compounds from the surface of primary and secondary wastewater clarifiers at a Kraft Mill

Emissions of reduced sulphur compounds (RSCs) from the primary and secondary clarifiers at a Kraft mill were measured for respectively 8 and 22 days using a floating flux chamber. In the primary clarifier, dimethyl disulphide (DMDS) had the highest mean flux (0.83 microg s(-1) m(-2)) among all RSCs, and the mean flux of total reduced sulphur (TRS) was 1.53 microg s(-1) m(-2). At the secondary clarifier, dimethyl sulphide (DMS) had the highest mean flux (0.024 microg s(-1) m(-2)), and the mean flux of total reduced sulphur (TRS) was 0.025 microg s(-1) m(-2). Large variations in fluxes as a function of sampling date were observed in both clarifiers. Emission fluxes of DMS from the secondary clarifier were correlated with temperature in the flux chamber and with the biological and chemical oxygen demands (BOD and COD) of the wastewater. Emission rates of RSCs from the clarifiers were found to be insignificant by comparison with other mill sources.     

Magnetic susceptibility measurements as proxy method to monitor soil pollution: development of experimental protocols for field surveys

In the framework of the development of new methods for measuring and monitoring soil pollution, this paper deals with the use of magnetic methodologies to monitor the heavy metals presence in soils. In particular it shows a procedure for collecting magnetic susceptibility measurements in order to interpret them as proxy variable for monitoring heavy metals in soils. Magnetic measurements are carried out using a magnetic susceptibility meter with two different probes for in situ field surveys. The experimental procedure is divided in two parts. In the first part we carry out laboratory tests aimed to evaluate, for both the probes, the effective investigation depth for soil, the measurement reproducibility under different conditions, and the influence of water content. We complete this part comparing in situ measurements obtained by means of two probes with different characteristics. In the second part we carry out tests to evaluate the relationships between heavy metal levels and magnetic susceptibility values of soil samples. We investigate the variability of the magnetic susceptibility measurements contaminating different soil samples with well known concentration of heavy metals. Moreover we study the correlation between magnetic susceptibility values and metal concentrations, determined by means of AAS, in soil samples collected during a field survey. Results suggest that a careful check of the experimental procedure play a crucial role for using magnetic susceptibility measurements for heavy metals in situ monitoring. This is very helpful both for improving the quality of data and for making simpler data interpretation.     

Transformations of nitrogen at the interface between the topsoil and an impervious clay subsoil

Much work has been done on gaseous emissions and leaching of nitrogenous compounds from whole soil profiles and also from soil surface measurements which are assumed to be mainly due to topsoil activity. In soils with an impervious clay subsoil, the boundary between the topsoil and subsoil may provide an interface for microbial activity, including N transformations. In this study, we investigated movement and transformations of two reactive N species (nitrate and urea) at the subsoil interface using a series of replicate, intact soil blocks, under two contrasting watering regimes. We measured fluxes in both liquid and gaseous phases and demonstrated that nitrate reaching the subsoil interface does not necessarily leach into water systems, but may denitrify immediately and could, therefore, add to atmospheric pollution through N₂O production. On the other hand, ammonium reaching the subsoil interface either directly, or after mineralization, appears to be more mobile than expected and has the potential to pollute watercourses.     

Material flow accounting in an Irish city-region 1992–2002

This paper aims to measure raw material inputs and waste flows in an Irish city-region in order to analyse (i) whether there was absolute dematerialisation in the particular case study over the period 1992–2002 and (ii) whether material consumption and waste generation were decoupled from economic growth and increases in disposable income over the same period. It was found that the selected material flow indicators showed no evidence of absolute dematerialisation over the given study period, although more recent evidence at the national level suggests that a decline in construction activity and extraction of non-metallic minerals has resulted in an absolute reduction in material consumption and it is likely that this will be mirrored at the system boundary level.It was found that Domestic Material Consumption (DMC) per capita and Direct Material Input (DMI) per capita increased at a faster rate than Domestic Processed Output (DPO) per capita and Direct Material Output (DMO) per capita between 1992 and 2002, which indicates relative decoupling of consumption from waste generation. In addition, it was found that there was relative decoupling of consumption and waste generation from disposable income growth over the study period. Finally, it was found that average DMC and DMI figures for the selected case study were lower than the national averages but broadly similar to results for other city-regions in the European Union (EU). On a methodological note, it was concluded that material flow accounting (MFA) for city-regions in Ireland is constrained due to a lack of disaggregated data for material flows, with the exception of local waste data, and it is recommended that bottom-up analysis should be used to complement disaggregated top-down data.     

Influence of extracts of adult crabs on molting of fiddler crab megalopae (<Emphasis Type="Italic">Uca pugnax</Emphasis>)

Larvae of many benthic invertebrates metamorphose in response to habitat cues, which include the presence of adult conspecifics. Prior research showed that fiddler crab [Uca pugnax (Smith)] megalopae advance molting to the first crab stage in seawater in which conspecific adult crabs were maintained. In the present study, extracts of adult crabs were prepared and the specificity and protein content were characterized. U. pugnax megalopae were reared in the laboratory to minimize their prior exposure to potential molting cues. Then they were presented with extract solutions (in 1995, 1996, 1997, and 2000) to determine the specificity of the molting response to extracts of several crab species and the effects of the protein concentration of the extract, age of the megalopae at exposure to extract, and the duration of exposure on the molting response. Megalopae of U. pugnax molted sooner in seawater containing extract from adult conspecifics than in filtered seawater without extract or in seawater containing extract from the congener U. minax. Extract from the mud crab Dyspanopeus sayi retarded molting of U. pugnax megalopae. The stimulatory effect of U. pugnax extract on molting of megalopae was dependent on extract concentration. U. pugnax megalopae did not respond to extract until 6 days after molting, and only 1 day of exposure was sufficient to stimulate molting. The boiled extract was effective after being frozen (–15°C) for 2 years. The preparation of stable extract provides a uniform stimulus for multiple experiments examining the specificity of molting cues for brachyuran crustacean larvae and the onset of receptivity to cues.Communicated by J.P. Grassle, New Brunswick