Balancing of Industrial Ventilation Systems

The body of information contained in this paper is directed to those individuals involved in the design and installation of air pollution control systems. When several sources are connected to one ventilation system, a critical part of the overall design is directed to assuring that the system is balanced so that the correct volume is exhausted from each point. The preferable technique for accomplishing this in industrial ventilation systems is the slide gate adjustment method, which can require extensive field adjustment to determine the final slide gate positions. In this study the pressure loss characteristics of slide gate dampers have been measured as a function of damper position, for both round and rectangular ductwork. Generalized graphs are presented that allow for the determination of damper position during the design phase, based on the amount of resistance that must be added to a given branch. Application of this technique indicates it to be both accurate and reliable and significantly reduces the time required to balance a system.     

Locating the Offender

Abstract

The Coordinating Research Council held its thirteenth Vehicle Emissions Workshop in April 2003, when results of the most recent on-road vehicle emissions research were presented. Ongoing work from researchers who are engaged in improving understanding of the contribution of mobile sources to ambient air quality and emission inventories is summarized here. Participants in the workshop discussed efforts to improve mobile source emission models, the role of on-board diagnostic systems in inspection and maintenance programs, light- and heavy-duty vehicle emissions measurements, on- and off-road emissions measurements, effects of fuels and lubricating oils on emissions, as well as topics for future research.     

A protein signal triggers sexual reproduction in Brachionus plicatilis (Rotifera)

The defining feature of the life cycle in monogonont rotifers such as Brachionus plicatilis (Muller) is alternation of asexual and sexual reproduction (mixis). Why sex is maintained in such life cycles is an important unsolved evolutionary question and one especially amenable to experimental analysis. Mixis is induced by a chemical signal produced by the rotifers which accumulates to threshold levels at high population densities. The chemical features of this signal were characterized using size exclusion, enzymatic degradation, protease protection assays, selective binding to anion ion exchange and C3 reversed phase HPLC columns, and the sequence of 17 N-terminal amino acids. These studies were carried out over two years beginning in 2003 using B. plicatilis Russian strain. When rotifer-conditioned medium was treated with proteinase K, its mixis-inducing ability was reduced by 70%. Proteinase K was added to medium auto-conditioned by 1 female ml⁻¹ where typically 17% of daughters became mictic and mixis was reduced to 1%. A cocktail of protease inhibitors added to conditioned medium significantly reduced degradation of the mixis signal by natural proteases. Conditioned medium subjected to ultrafiltration retained mixis-inducing activity in the >10 kDa fraction, but the <10 kDa fraction had no significant activity. The putative mixis signal bound to an anion exchange column, eluting off at 0.72 M NaCl. These fractions were further separated on a C3 reversed phase HPLC column and mixis-inducing activity was associated with a 39 kDa protein. Seventeen amino acids from the N-terminus have strong similarity to a steroidogenesis-inducing protein isolated from human ovarian follicular fluid. The 39 kDa protein is an excellent candidate for the rotifer mixis induction signal.     

The effects of mating on infanticide and pup discrimination in white-footed mice

Summary A laboratory study was conducted with white-footed mice (Peromyscus leucopus) to determine (1) if cohabitation and/or successful mating inhibits infanticide, and if so for how long, and (2) if males and females can discriminate between their own (familiar) and strange (unfamiliar) pups. Infanticidal males and females that were paired for 15 days and did not reproduce were not inhibited from killing pups, whereas infanticidal males and females that were paired until they reproduced were inhibited from committing infanticide at 4 days postpartum. Neither males nor females discriminated between familiar and unfamiliar pups with regard to engaging in infanticide. Approximately 50% of wild-caught males and females killed pups in the laboratory. Infanticidal pairs bred significantly sooner than did noninfanticidal pairs. The results are consistent with the promiscuous nature of P. leucopus males and territoriality of P. leucopus females. Offprint requests to: Donna M. Cicirello, Kellogg Biological Station, 3700 E. Gull Lake Drive, Hickory Corners, MI 49060, USA     

A PROPOSED APPROACH TO COORDINATION OF WATER RESOURCE DEVELOPMENT AND ENVIRONMENTAL REGULATIONS1

ABSTRACT: The planning and developing of water resources to meet the country's needs for water supply, flood control, hydroelectric power, irrigation, and navigation now needs to take more account of environmental needs and regulations. Water resource development is often beneficial to the environment, but may also be harmful, as in cases involving salmon and various other endangered species. As a national objective, the environment must be preserved and in some cases restored; but how can this be done consistent with other national objectives, relating to life and welfare of human beings? This problem has aroused the concern of many engineers and water scientists. As a result, a national conference on this subject was held in Chicago in June 1998, as an integral part of ASCE's Annual Conference on Water Resources Planning and Management and the Annual Conference on Environmental Engineering. At the conclusion of that conference, a post-conference meeting was held by a group of prominent water resource practitioners. It was concluded at this meeting that action should be taken by our government to establish a new form of interagency approach, involving the states, as a means of coordination in cases of national importance.     

INTEGRATING SOCIAL ANALYSIS INTO WATER RESOURCES PLANNING: SOME EMERGING TRENDS IN THE CORPS OF ENGINEERS1

ABSTRACT: While federal water resources laws and regulations require social analysis, no one workable formula exists for integrating it into water resources planning. Two primary problems in integrating social analysis into planning are examined; making trade-offs between policy acceptability and theoretical competence, and managing social analysis in planning. For illustration, the article builds on emerging trends within the U.S. Army Corps of Engineers. It concludes by observing that creative application of social theory to policy problems along with innovative data gathering techniques are the primary routes to managing these problems.     

OBSERVATION WELL NETWORK DESIGN FOR PUMPING TESTS IN UNCONFINED AQUIFERS1

ABSTRACT: This paper presents a method for determining locations of observation wells to be used in conducting pumping tests in unconfined aquifers. Sensitivity coefficients, the distribution of relative errors, and the correlation coefficients between four aquifer parameters (horizontal and vertical hydraulic conductivities K_r and K_z, storage coefficient S, and specific yield S_y) are used as the criteria for the design of observation well networks and the interpretation of pumping tests. The contours of the relative errors over a vertical profile are very useful in selecting the “best” location of an observation well. Results from theoretical analyses suggest that a wide range of locations is suitable for the determination of K_r and that good locations for the determination of K_z and S may be poorly suited for the determination of S_y. Consideration must be given to the position and lengths of the pumping well screen in the selection of observation well locations. For a given location, the quality of test data can be improved by using high pumping rates and frequent sampling of drawdowns. We found that a minimum of two and preferably three observation locations are needed along a given transect. Results of the four parameters from a single well analysis may contain higher uncertainties. However, composite analyses of multiple observation wells can reduce the correlation between the four aquifer parameters, particularly between K_r and S_y, thus, improving the quality of parameter estimation. Results from two pumping tests conducted at sites located in Nebraska were examined with regard to the proposed methodology.     

Controlled application rate of water treatment residual for agronomic and environmental benefits

Water treatment residuals (WTR) are useful soil amendments to control excessive soluble phosphorus (P) in soils, but indiscriminate additions can result in inadequate control or excessive immobilization of soluble P, leading to crop deficiencies. We evaluated the influence of application rates of an Al-WTR and various P-sources on plant yields, tissue P concentrations, and P uptake and attempted to identify a basis for determining WTR application rates. Bahiagrass (paspalum notatum Fluggae) was grown in a P-deficient soil amended with four P-sources at two application levels (N- and P-based rates) and three WTR rates (0, 10, and 25 g kg(-1) oven dry basis) in a glasshouse pot experiment. The glasshouse results were compared with data from a 2-yr field experiment with similar treatments that were surface applied to an established bahiagrass. Soil P storage capacity (SPSC) values increased with application rate of WTR, and the increase varied with sources of P applied. Soil soluble P concentrations increased as SPSC was reduced, and a change point was identified at 0 mg kg(-1) SPSC in the glasshouse and the field studies. A change point was identified in the bahiagrass yields at a tissue P concentration of 2.0 g kg(-1), corresponding to zero SPSC. Zero SPSC was shown to be an agronomic threshold above which yields and P concentrations of plants declined and below which there is little or no yield response to increased plant P concentrations. Applying P-sources at N-based rates, along with WTR sufficient to give SPSC value of 0 mg kg(-1) SPSC, enhanced the environmental benefits (reduced P loss potential) without negative agronomic impacts.