Role of Amino Acids on <Emphasis Type="Italic">In Situ</Emphasis> Photografting of Jute Yarn with 3-(Trimethoxysilyl) Propylmethacrylate

To improve the mechanical performance of natural lignocellulosic jute yarn, grafting with [3-(trimethoxysilyl) propylmethacrylate] (TMSPM) monomer has been performed on in situ UV radiation and optimized the monomer concentration (30%) and irradiation time (30 min). Effect of various amino acids (1%) as additives in TMSPM with photografted jute yarn at optimized system has been studied. The polymer loading (PL) and tensile properties like tensile strength (TS) and elongation at break (Eb) of treated samples were enhanced by incorporation of amino acids and the highest properties (TS = 300% and Eb = 386%) achieved by the sample treated with l-Arginine (Arg) with 32.5% PL value. Weak acid like 3% acetic acid and inorganic acid like 1% sulfuric acid were also incorporated in the optimized system of TMSPM grafting and compared their effect on the tensile properties with amino acid treated samples. Water absorption and weathering resistance of treated and untreated samples were also performed and treated sample showed lesser water uptake as well as less weight loss and mechanical properties as compared to untreated samples.     

Application of Cellulose Microfibrils in Polymer Nanocomposites

Cellulose microfibrils obtained by the acid hydrolysis of cellulose fibers were added at low concentrations (2–10% w/w) to polymer gels and films as reinforcing agents. Significant changes in mechanical properties, especially maximum load and tensile strength, were obtained for fibrils derived from several cellulosic sources, including cotton, softwood, and bacterial cellulose. For extruded starch plastics, the addition of cotton-derived microfibrils at 10.3% (w/w) concentration increased Young’s modulus by 5-fold relative to a control sample with no cellulose reinforcement. Preliminary data suggests that shear alignment significantly improves tensile strength. Addition of microfibrils does not always change mechanical properties in a predictable direction. Whereas tensile strength and modulus were shown to increase during addition of microfibrils to an extruded starch thermoplastic and a cast latex film, these parameters decreased when microfibrils were added to a starch–pectin blend, implying that complex interactions are involved in the application of these reinforcing agents.     

Mechanisms of cross-shelf transport of crab megalopae inferred from a time series of daily abundance

From 20 July 1982 to 19 July 1984, crab megalopae were trapped daily from the Scripps Institution of Oceanography pier. Pachygrapsus crassipes, Portunus xantusii, Cancer spp., Hemigrapsus spp., and Majid crab megalopae dominated the catch. Yearly, seasonal, and daily variations in the magnitude of the catch were observed. Yearly and seasonal variations were probably due to a strong El Niño event that occurred during the study and to the timing of spawning and duration of the larval phase, respectively. Daily variation was correlated with oceanographic processes that can transport larvae to shore. Catch of some taxon during some seasons correlated with wind stress suggesting that transport was wind driven. The correlations were, however, weak and the sign of the correlation varied between years. The maximum daily tidal range was significantly correlated (cross-correlations and cross Fourier analysis) to both daily seawater temperature anomalies (surface and bottom) and daily catch of crab megalopae in all taxa enumerated. Significant correlations between tidal range and temperature anomalies suggest that temperature anomalies were primarily due to the shoreward transport of warm and cold water by the internal tides. The consistent and relatively strong relationship between tidal range and catch of megalopae (the cross-Fourier analysis suggests that from 20 to >90% of the variation in catch can be attributed to variation in the tidal range) suggest that much of the shoreward transport of megalopae was via the internal tides. Shoreward transport of larvae by internal tides may be due to internal cold bores or convergences over large tidally generated internal waves (solitons). Peak catches of megalopae, however, were often not associated with cold anomalies suggesting that transport was due to moving convergences over internal waves.     

First Jurassic Choristodera from Asia

Although choristoderes have a good Lower Cretaceous record in Asia, they have never previously been recorded from Jurassic deposits. Here we describe fragmentary vertebral material referable to Choristodera indet. from the Middle Jurassic Balabansai Svita of the Fergana Valley, Kyrgyzstan. This provides a significant range extension for the group in Asia and shows that choristoderes already had a Pan-Laurasian distribution in the Jurassic.     

Sedimenttoxizit?t — ein inhaltlicher Schwerpunkt beim SETAC Europe 16th Annual Meeting World Forum Convention Center in Den Haag, Niederlangden, 7–11 Mai 2006

Tagungsankündigungen

Sedimenttoxizit?t — ein inhaltlicher Schwerpunkt beim SETAC Europe 16th Annual Meeting World Forum Convention Center in Den Haag, Niederlangden, 7–11 Mai 2006     

Research on simultaneous impact of hand-arm and whole-body vibration

This article presents the results of laboratory tests on the combined effect of whole-body vibration (WBV) and hand-arm vibration (HAV). The reactions of subjects exposed to various combinations of vibration were recorded. The vibrotactile perception threshold (VPT) test identified changes caused by exposure to vibration. Ten male subjects met the criteria of the study. There were 4 series of tests: a reference test and tests after exposure to HAV, WBV, and after simultaneous exposure to HAV and WBV. An analysis of the results (6000 ascending and descending VPTs) showed that the changes in VPTs were greatest after simultaneous exposure to both kinds of vibration. The increase in VPT, for all stimulus frequencies, was then higher than after exposure to HAV or WBV only.     

Self-assessment of hearing status and risk of noise-induced hearing loss in workers in a rolling stock plant

Noise measurements and questionnaire inquiries were carried out for 124 workers of a rolling stock plant to develop a hearing conservation program. On the basis of that data, the risk of noise-induced hearing loss (NIHL) was evaluated. Additionally, the workers' hearing ability was assessed with the (modified) Amsterdam inventory for auditory disability and handicap, (m)AIADH. The workers had been exposed to noise at A-weighted daily noise exposure levels of 74-110 dB for 1-40 years. Almost one third of the workers complained of hearing impairment and the (m)AIADH results showed some hearing difficulties in over half of them. The estimated risk of hearing loss over 25 dB in the frequency range of 3-6 kHz was 41-50% when the standard method of predicting NIHL specified in Standard No. ISO 1999:1990 was used. This risk increased to 50-67% when noise impulsiveness, coexposure to organic solvents, elevated blood pressure and smoking were included in calculations.     

Fire risk reduction through a community‐based risk assessment: reflections from Makola Market,Accra, Ghana

This paper explores the level of vulnerability to the hazard of fire that exists in Makola Market in Accra, Ghana, and assesses how this threat can be reduced through a community‐based risk assessment. It examines the perceptions of both market‐stall occupants and primary stakeholders regarding the hazard of fire, and analyses the availability of local assets (coping strategies) with which to address the challenge. Through an evaluation of past instances of fire, as well as in‐depth key stakeholder interviews, field visits, and observations, the study produces a detailed hazard map of the market. It goes on to recommend that policymakers consider short‐to‐long‐term interventions to reduce the degree of risk. By foregrounding the essence of holistic and integrated planning, the paper calls for the incorporation of disaster mitigation measures in the overall urban planning process and for the strict enforcement of relevant building and fire safety codes by responsible public agencies.     

A framework for allocating conservation resources among multiple threats and actions

Land managers decide how to allocate resources among multiple threats that can be addressed through multiple possible actions. Additionally, these actions vary in feasibility, effectiveness, and cost. We sought to provide a way to optimize resource allocation to address multiple threats when multiple management options are available, including mutually exclusive options. Formulating the decision as a combinatorial optimization problem, our framework takes as inputs the expected impact and cost of each threat for each action (including do nothing) and for each overall budget identifies the optimal action to take for each threat. We compared the optimal solution to an easy to calculate greedy algorithm approximation and a variety of plausible ranking schemes. We applied the framework to management of multiple introduced plant species in Australian alpine areas. We developed a model of invasion to predict the expected impact in 50 years for each species-action combination that accounted for each species’ current invasion state (absent, localized, widespread); arrival probability; spread rate; impact, if present, of each species; and management effectiveness of each species-action combination. We found that the recommended action for a threat changed with budget; there was no single optimal management action for each species; and considering more than one candidate action can substantially increase the management plan's overall efficiency. The approximate solution (solution ranked by marginal cost-effectiveness) performed well when the budget matched the cost of the prioritized actions, indicating that this approach would be effective if the budget was set as part of the prioritization process. The ranking schemes varied in performance, and achieving a close to optimal solution was not guaranteed. Global sensitivity analysis revealed a threat's expected impact and, to a lesser extent, management effectiveness were the most influential parameters, emphasizing the need to focus research and monitoring efforts on their quantification.     

Activated carbon produced from waste coffee grounds for an effective removal of bisphenol-A in aqueous medium

Environmental Science and Pollution Research - Bisphenol-A is widely used chemical in industry and unfortunately often detected in natural waters. Considered as an emerging pollutant, bisphenol-A...