City hazardous gas monitoring network

In our today's societies, many dangerous chemicals are produced and transported. Due to the vast use of chemicals, more chemical accidents are taking place with huge losses. In this study a city hazardous gas monitoring network was designed to detect the dispersion of toxic and combustible gases in the primary stages. The network could cover hazardous chemical facilities, important hazardous chemical routes, warehouses and special locations which may be the targets of terrorist attacks. The network is consisted of several local networks and a central control panel complex. Each local network has a local control panel in the center and many detectors and sounders around it at distances less than 3000 m that communicate with the local control panels wirelessly. In each location there are two types of gas detectors, toxic and combustible, and a sounder which are equipped with a wireless, radio frequency modem allowing the units to communicate readings and other information on a real-time basis with a remotely located local control panel. High sensitive Photo Ionization Detectors, PIDs, are used to provide fast and low-level on-site screening for chemicals contamination. Combustible gas detectors are the second choice to sense the combustible gas and verify the readings of PIDs in this regard. The central panel consists of several connected control panels work uniquely helping a computer set and the appropriate software and communicate with local control panels via telephone lines. All of the network components are shown on the monitor of central panel with special symbols by geographical information system program. The system is fully addressable so that the high level detection of a detector produces a blinking color double-circle around its symbol in GIS plan. In case of high level gas detection, a team of experts who are fully equipped with different portable detectors depart to the site to test the field to identify the chemicals. All readings of detectors are saved in a data bank and then analyzed to find any chemicals spills and leakages. The network was simulated by a special program so that the components of local networks and the central panel are shown in separate windows. By clicking on one detector on environmental window the formerly designed responses will be activated in central panel window.     

The crash severity impacts of fixed roadside objects

INTRODUCTION: This study analyzes the in-service performance of roadside hardware on the entire urban State Route system in Washington State by developing multivariate statistical models of injury severity in fixed-object crashes using discrete outcome theory. The objective is to provide deeper insight into significant factors that affect crash severities involving fixed roadside objects, through improved statistical efficiency along with disaggregate and multivariate analysis. METHOD: The developed models are multivariate nested logit models of injury severity and they are estimated with statistical efficiency using the method of full information maximum likelihood. RESULTS: The results show that leading ends of guardrails and bridge rails, along with large wooden poles (e.g. trees and utility poles) increase the probability of fatal injury. The face of guardrails is associated with a reduction in the probability of evident injury, and concrete barriers are shown to be associated with a higher probability of lower severities. Other variables included driver characteristics, which showed expected results, validating the model. For example, driving over the speed limit and driving under the influence of alcohol increase the probability of fatal accidents. Drivers that do not use seatbelts are associated with an increase in the probability of more severe injuries, even when an airbag is activated. IMPACT ON INDUSTRY: The presented models show the contribution of guardrail leading ends toward fatal injuries. It is therefore important to use well-designed leading ends and to upgrade badly performing leading ends on guardrails and bridges. The models also indicate the importance of protecting vehicles from crashes with rigid poles and tree stumps, as these are linked with greater severities and fatalities.     

The effects of parental altruism on the governance of family‐managed firms

We draw on the economic, corporate governance, and family business literatures to explain why the effects of family on family firms makes this governance form theoretically distinct from those of public and private non‐family firms. Our thesis is that parental altruism, when combined with private ownership and owner‐management, influences the ability of the firm's owner‐manager to exercise self‐control, which, in turn, can expose some family firms to conflicts rooted in the agency threats of moral hazard, hold‐up, and adverse selection. We then discuss why some other family firms are able to minimize these dark side threats and thereby attain altruism's brighter side. Finally, we discuss how altruism's influence changes over time as ownership becomes dispersed among family members and across generations. Copyright © 2005 John Wiley & Sons, Ltd.     

I-Risk: development of an integrated technical and management risk methodology for chemical installations

This paper presents an integrated quantitative risk assessment method for hazardous installations, taking into account management as well as technical design and producing risk level measures. The key components of the I-Risk methodology are the technical model, the management model and their interface. The technical model consists of developing a master logic diagram (MLD) delineating the major immediate causes of loss of containment (LOC) and associated quantitative models for assessing their frequency. The management model consists of the tasks, which must be carried out systematically in the primary business functions (such as operations, emergency operations, maintenance and modifications). A management audit quantifies the quality of these management tasks. The management–technical interface modifies certain parameters of the technical model on the basis of the quality of the safety management system of the specific installation. The methodology is exemplified through its application to the risk assessment of an ammonia storage facility. A detailed technical model simulating the response of the system to various initiating events is developed along with a detailed management model simulating the influence of the plant-specific management and organisational practices. The overall effect is quantified through the frequency of release of ammonia as a result of a loss of containment in a storage tank and in a pipeline.     

Factor structure of the transformational leadership model in human service teams

The purpose of this study was to examine the factor structure of the transformational leadership model in human service teams. As the nature of this work environment mandates certain management‐by‐exception practices, patterns of correlations between perceptions of active and passive management‐by‐exception behaviors and transformational, transactional, and laissez‐faire leadership were of interest. 236 leaders and 620 subordinates from 54 mental health teams completed the Multifactor Leadership Questionnaire, form 8Y. Results suggest that active and passive management‐by‐exception factors are independent constructs. Copyright © 2003 John Wiley & Sons, Ltd.     

Assessment of deep aquifer groundwater quality in a geographically unique climatic region of Southern Western Ghats,India using water quality indices

Water quality index (WQI) models are generally used in hydrochemical studies to simplify complex data into single values to reflect the overall quality. In this study, deep groundwater quality in the Chittur and Palakkad Taluks of the Bharathapuzha river basin of Kerala, India, was assessed by employing the WQI method developed by the Canadian Council of Ministers of the Environment (CCME). The assessment of overall water quality is indispensable due to the specific characteristics of the study area, such as geography, climate, over-drafting, and prevalent agricultural practices. Forty representative samples were collected from the study area for monsoon (MON) and pre-monsoon (PRM) seasons. The results showed a general increase of contents from MON to PRM. The major cations were spread in the order Ca²⁺>Na+>Mg²⁺>K⁺ and the anions HCO₃⁻>Cl⁻>CO₃²⁻ based on their relative abundance. Among various parameters analysed, alkalinity and bicarbonate levels during MON were comparatively high, which is indicative of carbonate weathering, and 90% of the samples failed to meet the World Health Organization (WHO, 2017)/Bureau of Indian Standards (BIS, 2012) drinking water guidelines. The CCME WQI analysis revealed that nearly 50% of the samples during each season represented good and excellent categories. The samples in the poor category comprised 10% in MON and 15% in PRM. The overall WQI exhibited 15% of poor category samples as well. The spatial depiction of CCME WQI classes helped to expose zones of degraded quality in the centre to eastward parts. The spatial and temporal variations of CCME WQI classes and different physicochemical attributes indicated the influence of common factors attributing to the deep groundwater quality. The study also revealed inland salinity at Kolluparamba and Peruvamba stations, where agricultural activities were rampant with poor surface water irrigation.     

Aortic isthmus Doppler velocimetry: role in assessment of preterm fetal growth restriction

Intrauterine fetal growth restriction (IUGR) is an important pregnancy complication associated with significant adverse clinical outcome, stillbirth, perinatal morbidity and cerebral palsy. To date, no uniformly accepted management protocol of Doppler surveillance that reduces mortality and cognitive morbidity has emerged. Aortic isthmus (AoI) evaluation has been proposed as a potential monitoring tool for IUGR fetuses. In this review, the current knowledge of the relationship between AoI Doppler velocimetry and preterm fetal growth restriction is reviewed. Relevant technical aspects and reproducibility data are reviewed as we discuss AoI Doppler and its place within the existing repertoire of Doppler assessments in placental insufficiency. The AoI is a link between the right and left ventricles which perfuse the lower and upper body, respectively. The clinical use of AoI waveforms for monitoring fetal deterioration in IUGR has been limited, but preliminary work suggests that abnormal AoI impedance indices are an intermediate step between placental insufficiency-hypoxemia and cardiac decompensation. Further prospective studies correlating AoI indices with arterial and venous Doppler indices and perinatal outcome are required before encorporating this index into clinical practice. Copyright © 2010 John Wiley & Sons, Ltd.     

Genetic sex determination in <Emphasis Type="Italic">Astatotilapia calliptera</Emphasis>, a prototype species for the Lake Malawi cichlid radiation

East African cichlids display extensive variation in sex determination systems. The species Astatotilapia calliptera is one of the few cichlids that reside both in Lake Malawi and in surrounding waterways. A. calliptera is of interest in evolutionary studies as a putative immediate outgroup species for the Lake Malawi species flock and possibly as a prototype ancestor-like species for the radiation. Here, we use linkage mapping to test association of sex in A. calliptera with loci that have been previously associated with genetic sex determination in East African cichlid species. We identify a male heterogametic XY system segregating at linkage group (LG) 7 in an A. calliptera line that originated from Lake Malawi, at a locus previously shown to act as an XY sex determination system in multiple species of Lake Malawi cichlids. Significant association of genetic markers and sex produce a broad genetic interval of approximately 26 megabases (Mb) using the Nile tilapia genome to orient markers; however, we note that the marker with the strongest association with sex is near a gene that acts as a master sex determiner in other fish species. We demonstrate that alleles of the marker are perfectly associated with sex in Metriaclima mbenjii, a species from the rock-dwelling clade of Lake Malawi. While we do not rule out the possibility of other sex determination loci in A. calliptera, this study provides a foundation for fine mapping of the cichlid sex determination gene on LG7 and evolutionary context regarding the origin and persistence of the LG7 XY across diverse, rapidly evolving lineages.     

Experimental investigation on effect of an absorber plate covered by a layer of sand on the efficiency of passive solar air collector

A passive flat-plate solar air collector was constructed in the laboratory of New and Renewable Energy in Arid Zones, Ouargla University, South East Algeria. The absorber of the passive flat-plate solar air collector was laminated with a thin layer of local sand. This acted as a thermal packed bed with a collecting area of 0.5 m² (1 m × 0.5 m). Three series of experiments were performed. The first consisted of choosing the best sand brought from three different places of the Algerian desert. The second consisted of studying the effect of the thickness of the sand layer on the daily efficacy of the collector. The influence of the sand diameter was investigated in the third series. The experimental results showed that: All collectors covered with sand had higher efficiency than those without. It was noticed that, for a fixed mass of sand (given thickness of the sand layer), the improvement of the collector was inversely proportional to the sand particle diameters. The maximum efficiency approximates 62.1% for a particle diameter 0.063 mm, compared to 41.71% for a diameter 0.250 mm.The efficiency of the collector for a fixed particle diameter increases with the increase in the thickness of the sand layer. The collector with thickness sand layer 0.84 mm gave the best efficiency of 46.14% compared to 27.8% for 0.28 mm of thickness sand layer.