Reuse of mining wastewater in agricultural activities in Jordan

A pilot study was completed in the Al-Abyad area near phosphate mining activity in Jordan. Six plots of 50 m² each were planted with two types of plant species (Zea mays spp. and Medicago lupulina spp.) and irrigated using three types of water (fresh groundwater, mine wastewater, and hydride water consisting of 50% fresh and 50% mine wastewater) to investigate the suitability of utilizing mine wastewater for food production in the area. Water, soil and plant sampling was completed for each plot over different time intervals and analyzed for heavy metal (Cr⁺⁶, Ni⁺², Zn⁺² and Pb⁺²) in addition to major ionic composition of the water used for irrigation. Crop yield was estimated at the end of the experiment. Plots irrigated with mine wastewater showed slightly higher heavy metals concentrations and soil salinity during the experiment period was higher for plots irrigated with mine wastewater compared to plots irrigated with fresh water, and it was uniform through the upper 45 cm of the soil profile due to the high amount of irrigation water used during the experiment. Crop yield was inversely proportional to salinity as an increase of salinity by 2-folds resulted in reducing yield by almost 50%. However, no risk of heavy metals contamination was found in plants and soil. Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Investigation of soil multi-element composition in Antalya,Turkey

The chemical composition of 73 surface soil samples collected at the city of Antalya were analyzed for major, minor and trace elements to assess distribution of soil pollution, due to deposition of pollution-derived particles from the atmosphere. Comparison with data from rural area and distribution maps demonstrated that the composition of soil by metals is not significantly modified by anthropogenic activities in most of the city and its surroundings. In these areas, observed concentrations can be largely accounted for by occurrence of elements in aluminasilicate matrix of soil. However, soil composition is altered substantially close to major industries and at the settlement districts. In such limited areas, concentrations of anthropogenic elements such as Cd, Pb, Zn, Cu and Cr are factors of 20-50 higher than their concentrations in unperturbed soil. Factor analysis revealed three groups of elements that differ in their distributions. One of these components is unperturbed soil component, which is distributed uniformly in the study area; the second one is polluted soil, which is mostly confined to settlement areas and around industries; and the third is a mixed marine and motor vehicle impacted soil component, which occurred at the coastal parts of the city.     

Effects of air pollution on rice yield in the Pakistan Punjab

A study using open-top chambers ventilated with ambient or charcoal filtered air in the vicinity of Lahore, Pakistan demonstrated reductions of 42% and 37% in the grain yield of two cultivars of rice (Oryza sativa L.). This yield reduction was primarily due to the reduction in mean panicle number per plant, although significant effects of filtration on 1000 grain weight and the number of filled grains per panicle were also detected. The 6-h daily mean O(3) concentrations were only 10-20 nl litre(-1) during the monsoon season, but increased to 30-55 nl litre(-1) later in the growing season, while the mean NO(2) concentration during the experiment was 12 nl litre(-1). On the basis of experience in North America and Japan, the reductions in yield in the present study are substantially greater than might be predicted. The reasons for this discrepancy are discussed, together with the implications for effects on rice yield in other regions of south and south-east Asia.     

Minimization of socioeconomic disruption for displaced populations following disasters

In the aftermath of catastrophic natural disasters such as hurricanes, tsunamis and earthquakes, emergency management agencies come under intense pressure to provide temporary housing to address the large‐scale displacement of the vulnerable population. Temporary housing is essential to enable displaced families to reestablish their normal daily activities until permanent housing solutions can be provided. Temporary housing decisions, however, have often been criticized for their failure to fulfil the socioeconomic needs of the displaced families within acceptable budgets. This paper presents the development of (1) socioeconomic disruption metrics that are capable of quantifying the socioeconomic impacts of temporary housing decisions on displaced populations; and (2) a robust multi‐objective optimization model for temporary housing that is capable of simultaneously minimizing socioeconomic disruptions and public expenditures in an effective and efficient manner. A large‐scale application example is optimized to illustrate the use of the model and demonstrate its capabilities ingenerating optimal plans for realistic temporary housing problems.     

Revealing the socioeconomic impact of small disasters in Colombia using the DesInventar database

Small disasters are usually the product of climate variability and climate change. Analysis of them illustrates that they increase difficulties for local development—frequently affecting the livelihoods of poor people and perpetuating their level of poverty and human insecurity—and entail challenges for a country's development. In contrast to extreme events, small disasters are often invisible at the national level and their effects are not considered as relevant from a macroeconomic standpoint. Nevertheless, their accumulated impact causes economic, environmental and social problems. This paper presents the results of an evaluation of the DesInventar database, developed in 1994 by the Network for Social Studies in Disaster Prevention in Latin America. In addition, it proposes a new version of the Local Disaster Index developed in 2005 within the framework of the Disaster Risk and Management Indicators Program for the Americas, with the support of the Inter‐American Development Bank.     

Removal of two cationic dyes from a textile effluent by filtration-adsorption on wood sawdust

BACKGROUND: Wastewater from textile industry contains various contaminants such as dyes, surfactants and heavy metals. Textile dyes have synthetic origin and complex aromatic molecular structures that make them difficult to biodegrade when discharged in the ecosystem. The objective of this study was to examine the decolourisation of textile effluents containing cationic dyes by filtration-adsorption on wood sawdust from two different origins; fir as an example of a conifer tree, and beech as an example of a deciduous one, and to explain the adsorption mechanism. METHODS: The process of dye removal was applied to a synthetic effluent in batch mode. Adsorption experiments were performed by suspending sawdust in the effluent and analyzing the supernatant by spectrophotometry. The effectiveness of the treatment process was evaluated by measuring coloration. RESULTS AND DISCUSSION: Experimental results showed a significant potential for wood sawdust, especially coniferous sawdust, to remove cationic dyes from textile effluents. Adsorption kinetics was influenced by the initial dye concentration, nature and amount of sorbent as well as sorbent particle size. The adsorption followed a pseudo first-order kinetics. For both basic dyes, the Langmuir adsorption equation showed a better fit than the Freundlich equation. CONCLUSION: Filtration-adsorption using an inexpensive and readily available biosorbent provided an attractive alternative treatment for dye removal, and it does not generate any secondary pollution. Recommendations and Perspectives. Laboratory studies provide promising perspectives for the utilization of wood sawdust as renewable adsorbent for reducing pollution while enhancing the reuse of textile effluents. However, the treatment process needs to be applied to the other textile dye classes in order to be used on an industrial scale.     

Multivariate statistics to investigate metal contamination in surface soil

The modification of soil composition in the urbanized area of Ankara due to wet-dry deposition and pollution-derived particles from the atmosphere is investigated by analyzing 120 surface soil samples, collected from the urbanized area and its un-urbanized surrounding, for major, minor and trace elements. Concentrations of elements from human activity (e.g. Cd, Pb, Cr, Zn, Cu and Ca) in the urbanized area were higher than their corresponding concentrations in global average soil and soil in un-urbanized areas outside the urbanized area. Metal contents in soil were very high in densely populated districts and around some industrial facilities. The only exception was Pb distribution, which was more dispersed, due to the nature of motor vehicle emissions. Alteration of the Cd, Zn, Cu and Cr content of soil was confined to the inhabited and industrial areas, whereas enrichment factors of these elements were close to unity in the remaining study area. Factor analysis identified two polluted soil factor associations. One factor includes elements, such as Zn and Cd, which had high factor scores in inhabited areas and the other factor (high loading of Pb) represents soil polluted by motor vehicle emissions.     

Risk assessment of pharmaceutically active compounds (PhACs) in the Klang River estuary,Malaysia

Environmental Geochemistry and Health - The concentration profile, distribution and risk assessment of pharmaceutically active compounds (PhACs) in the coastal surface water from the Klang River...     

Indoor particle size distributions in homes with open fires and improved Patsari cook stoves

Particulate pollution has been clearly linked with adverse health impacts from open fire cookstoves, and indoor air concentrations are frequently used as a proxy for exposures in health studies. Implicit are the assumptions that the size distributions for the open fire and improved stove are not significantly different, and that the relationship between indoor concentrations and personal exposures is the same between stoves. To evaluate the impact of these assumptions size distributions of particulate matter in indoor air were measured with the Sioutas cascade impactor in homes using open fires and improved Patsari stoves in a rural Purepecha community in Michoacan, Mexico. On average indoor concentrations of particles less than 0.25 μm were 72% reduced in homes with improved Patsari stoves, reflecting a reduced contribution of this size fraction to PM_2.5 mass concentrations from 68% to 48%. As a result the mass median diameter of indoor PM_2.5 particulate matter was increased by 29% with the Patsari improved stove compared to the open fire (from 0.42 μm to 0.59 μm, respectively). Personal PM_2.5 exposure concentrations for women in homes using open fires were approximately 61% of indoor concentration levels (156 μg m^?3 and 257 μg m^?3 respectively). In contrast personal exposure concentrations were 77% times indoor air concentration levels for women in homes using improved Patsari stoves (78 μg m^?3and 101 μg m^?3 respectively). Thus, if indoor air concentrations are used in health and epidemiologic studies significant bias may result if the shift in size distribution and the change in relationship between indoor air concentrations and personal exposure concentrations are not accounted for between different stove types.     

Date palm (Phoenix dactylifera L.) leaves as biomonitors of atmospheric metal pollution in arid and semi-arid environments

The leaves of date palms were evaluated as a possible biomonitor of heavy metal contamination in Ma’an city, Jordan. Concentrations of (Fe), (Pb), (Zn), (Cu), (Ni), and (Cr) were determined in washed and unwashed leaves and soil samples collected from different sites with different degrees of metal contamination (urban, suburban, industrial, highway and rural sites); separate leaves were taken from outside the city to be used as a control sample. Samples collected from industrial sites were found to have high concentrations of all metals except those of Cu, Ni and Pb, which were found at high levels in the highway site samples which is associated with the road traffic. The difference between unwashed and washed samples showed that metal pollutants exist as contaminants, particularly Pb, Zn and Ni, which varied in concentration, depending on the source of the metal.