Evaluation of enterovirus recovery in surface water by different adsorption and elution procedures

The performance of six concentration method combinations and two quantitative analysis techniques were evaluated in terms of enterovirus recovery efficiencies by adjusting the pH and salt concentration of water samples. Of the six concentration method combinations, adsorption on nitrocellulose membranes followed by an acid rinse elution consistently gave the highest recovery efficiencies. In theory, an electropositive membrane should be the most appropriate technique for adsorption of electronegative viruses in pure water. However, it displayed the greatest loss in natural waters. For adsorption and elution procedures, both the electronegative membrane, accompanied by an acid rinse step, and the electropositive membrane, accompanied by a glycine rinse step, provided higher recovery efficiencies. MPN-RT-PCR, a statistically quantitative analysis method, performed more efficiently, in economic terms, but had a similar enterovirus recovery trend to real-time RT-PCR, which is the authoritative quantitative analysis method for nucleic acid.     

The temporal changes in road stormwater runoff quality and the implications to first flush control in Chongqing, China

This study investigates the quality of stormwater runoff from a driveway in the southwest mountainous urban area of Chongqing, China, from 2010 to 2011. The results showed that the mean concentrations of chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) were 4.1, 2.4, and 2.2 times the grade V levels of the national surface water standard of China. The pollutant concentration peak preceded or synchronized with the rainfall intensity peak and occurred 10 min after the runoff started. The significant high pollutant concentration in the initial stage of the rainfall suggested that first flush control is necessary, especially for the most polluted constitutes, such as total suspended solids, COD, and TN. Three potential pollution sources were identified: the atmospheric dry and wet deposition (TN, NO₃ ^?-N, NH₄ ⁺-N, and DCu), the road sediment and materials (total suspended solids, COD, and TP), and the vehicle emissions (DPb and DZn). Therefore, this study indicates that reductions in road sediments and material pollution and dry and wet deposition should be the priority factors for pollution control of road stormwater runoff in mountainous urban areas.     

Pyrimethanil residue and dissipation in tomatoes and soil under field conditions

A residue analytical method to detect pyrimethanil in tomatoes and soil was developed by using high-performance liquid chromatography with a diode array detector. The dissipation and residue level of pyrimethanil in tomatoes and soil were also investigated. Results showed that the average recoveries are in the range of 87.2 to 90.0 % with a relative standard difference of 2.22 to 7.61 % in tomatoes and soil. In Guangdong, Shandong, and Yunnan, the half-lives of pyrimethanil in tomatoes were 1.8, 3.6, and 4.2 days and those in soil were 4.0, 3.3, and 3.9 days, respectively. The dissipation rate of pyrimethanil in tomatoes and soil was affected by temperature, precipitation, and soil type. The terminal residue results showed that when pesticide pyrimethanil was used under the experiment design, all the results were far below the available maximum residue limits. Low residues in tomatoes and soil suggest that this pesticide is safe to use under the recommended dosage.     

An integrative framework for sustainable supply chain management practices in the oil and gas industry

This paper proposes a framework for understanding the contextual factors of sustainable supply chain management (SSCM) practices in the O&G industry. It is based on a literature review of studies related to SSCM of O&G topics. The review reveals that there is a lack of SSCM research specific to the industry. Present studies focus on individual stages of its supply chain and do not consider all dimensions of sustainable development, namely economic, environmental and social factors. In addition, existing frameworks lack important contextual aspects of the industry's business and organizational environment. To address these gaps, our research develops an overarching framework operationalizing the internal and external contextual factors of the O&G industry environment that can influence the outcome of its SSCM practices. The proposed framework is useful as a tool in the formulation and implementation of SSCM strategy that enables alignment of a company's internal capabilities with its external environment.     

Calibration Catchment Selection for Flood Regionalization Modeling1

Wan Jaafar, Wan Zurina, and Dawei Han, 2012. Calibration Catchment Selection for Flood Regionalization Modeling. Journal of the American Water Resources Association (JAWRA) 48(4): 698‐706. DOI: 10.1111/j.1752‐1688.2012.00648.x Abstract: There are two unsolved problems in flood regionalization model development related to the quantity and quality of calibration catchments: (1) how many calibration catchments should be used? and (2) how to select the calibration catchments? This study explores these two questions through a case study on the median annual maximum flood (QMED) model in the United Kingdom. It has been found that the chance of developing a good QMED model decreases significantly when the number of calibration catchments drops below a critical number (e.g., 60 in the case study). However, no significant improvement is achieved if the number of calibration catchments is above it. This number could be used as a benchmark for choosing randomly selected calibration catchments. Across a broad range of calibration catchment numbers, there are good and poor calibrated models regardless of calibration catchment numbers. High quality models could be developed from a small number of calibration catchments and also poor models from a large number of calibration catchments. This indicates that the number of calibration catchments may not be the dominating factor for developing a high quality regionalization model. Instead, the information content could be more important. The study has demonstrated that the standard deviation values between the best and poorest groups are distinctive and could be used in choosing appropriate calibration catchments.     

Effect of heat treatment on sorption of polar and nonpolar compounds to montmorillonites and soils

Batch sorption isotherms of 1,3,5-trichlorobenzene, 1,3,5-trinitrobenzene, and tetracycline to organic-free montmorillonites and soils receiving heat treatment (375°C for 24 h) were compared with those to unheated sorbents. Sorption of the nonpolar 1,3,5-trichlorobenzene to soil was lowered after the removal of humus by heating, consistent with the mechanism of hydrophobic partition into organic matter. For 1,3,5-trinitrobenzene, the enhanced sorption to heated soils was attributed to specific interactions with exchangeable cations facilitated by heating-induced irreversible partial dehydration of the clay interlayer. For tetracycline, an additional mechanism for sorption enhancement could be due to increased exposure of strong complexation sites on clay minerals after removal of the humic coating. These hypotheses were supported by the sorption data to heated and unheated Na-, K-, and Cs-saturated montmorillonites. The combustion method is commonly adopted to measure the content of black carbon in soils and sediments. However, findings from the present study indicate that combustion may greatly modify the structural properties of clay minerals, leading to misinterpreted sorption contributions of different soil components to sorption of polar or ionic compounds.     

Volatile organic compound concentrations, emission rates, and source apportionment in newly-built apartments at pre-occupancy stage

The present study investigated the indoor concentrations of selected volatile organic compounds (VOCs) and formaldehyde and their indoor emission characteristics in newly-built apartments at the pre-occupancy stage. In total, 107 apartments were surveyed for indoor and outdoor VOC concentrations in two metropolitan cities and one rural area in Korea. A mass balanced model was used to estimate surface area-specific emission rates of individual VOCs and formaldehyde. Seven (benzene, ethyl benzene, toluene, m,p-xylene, o-xylene, n-hexane, and n-heptane) of 40 target compounds were detectable in all indoor air samples, whereas the first five were detected in all outdoor air samples. Formaldehyde was also predominant in the indoor air samples, with a high detection frequency of 96%. The indoor concentrations were significantly higher than the outdoor concentrations for aromatics, alcohols, terpenes, and ketones. However, six halogenated VOCs exhibited similar concentrations for indoor and outdoor air samples, suggesting that they are not major components emitted from building materials. It was also suggested that a certain portion of the apartments surveyed were constructed by not following the Korean Ministry of Environment guidelines for formaldehyde emissions. Toluene exhibited the highest emission rate with a median value of 138 μg m⁻² h⁻¹. The target compounds with median emission rates greater than 20 μg m⁻² h⁻¹ were toluene, 1-propanol, formaldehyde, and 2-butanone. The wood panels/vinyl floor coverings were the largest indoor pollutant source, followed by floorings, wall coverings, adhesives, and paints. The wood panels/vinyl floor coverings contributed nearly three times more to indoor VOC concentrations than paints.     

Performance of oil palm kernel shell gasification using a medium-scale downdraft gasifier

This article focused on the performance of oil palm kernel shell (PKS) gasification using a medium-scale downdraft gasifier with a feedstock capacity of 500 kg at a temperature range of 399–700°C and at a feed rate of 177 kg/h. This article is important for evaluating the reliability of PKS gasification for commercial power generation activities from biomass. The process performance was evaluated based on the syngas calorific value (CV), syngas flow rate, and its cold gas efficiency (CGE). The syngas flow rates and CVs were measured using a gas flow meter and a gas analyzer in real time. The data obtained were then analyzed to evaluate the performance of the process. The results showed that the CGE of the process was moderately high (51%) at 681°C, with a high syngas CV (4.45–4.89 MJ/Nm³) which was ideal for gas engine applications. The PKS gasification performance increased when the reactor temperature increased. Projections were made for the CGE and the syngas CV for the PKS gasification with increased reactor temperatures and it was found that these values could be increased up to 80% and 5.2 MJ/Nm^3, respectively at a reactor temperature of 900°C. In addition, the estimated power that could be generated was about 600 kW_e at a maximum operation of 500 kg/h of feed rate. Based on the analysis, a medium-scale PKS gasification is observed to be a promising process for power generation from biomass due to the favorable performance of the process.     

Mercury in dental amalgam: Are our health care workers at risk?

Dental amalgam in fillings exposes workers to mercury. The exposure to mercury was investigated among 1871 dental health care workers. The aim of the study was to evaluate the risk of mercury exposure among dental compared to nondental health care workers and to determine other risk factors for mercury exposure. Respondents answered questionnaires to obtain demographic, personal, professional, and workplace information and were examined for their own amalgam fillings. Chronic mercury exposure was assessed through urinary mercury levels. In total, 1409 dental and 462 nondental health care workers participated in the study. Median urine mercury levels for dental and nondental health care workers were 2.75 μg/L (interquartile range [IQR] = 3.0175) and 2.66 μg/L (IQR = 3.04) respectively. For mercury exposure, there were no significant risk factor found among the workers involved within the dental care. The Mann–Whitney test showed that urine mercury levels were significantly different between respondents who eat seafood more than 5 times per week compared to those who eat it less frequently or not at all (p = 0.003). The urinary mercury levels indicated significant difference between dental workers in their practice using squeeze cloths (Mann–Whitney test, p = 0.03). Multiple logistic regression showed that only the usage of cosmetic products that might contain mercury was found to be significantly associated with the urinary mercury levels (odds ratio [OR] = 15.237; CI: 3.612–64.276). Therefore, mean urinary mercury levels of health care workers were low. Exposure to dental amalgam is not associated with high mercury exposure. However, usage of cosmetic products containing mercury and high seafood consumption may lead to the increase of exposure to mercury.

Implications: Exposure to the high levels of mercury from dental amalgam can lead to serious health effects among the dental health care workers. Nationwide chronic mercury exposure among dental personnel was assessed through urinary mercury levels. Findings suggest low urinary mercury levels of these health care workers. Exposure to dental amalgam is not associated with high mercury exposure. However, the usage of cosmetic products containing mercury and high seafood consumption may lead to the increase of exposure to mercury.     

磁性膨润土的制备及类Fenton氧化法处理焦化废水

以Al-Fe柱撑膨润土为原料,通过原位氧化沉淀法负载纳米Fe₃O₄颗粒,制备磁性膨润土。采用XRD,SEM,EDS技术对磁性膨润土进行了表征,并将其作为类Fenton反应催化剂对焦化厂二沉池出水（COD为267.6 mg/L、色度为428度）进行了深度处理,探讨了各反应条件对处理效果的影响。实验结果表明：Fe₃O₄颗粒较为均匀地分布在膨润土表面,负载牢固;在H₂O₂加入量70 mmol/L、磁性膨润土加入量0.8 g/L、反应温度30 ℃、初始废水pH 5.0的条件下反应30 h,废水COD和色度的去除率分别达到78.5%和93.4%,COD和色度分别降至57.5 mg/L和28度,满足GB/T 19923—2005《城市污水再生利用 工业用水水质》的要求;磁性膨润土使用4次后,对废水的处理效果仍很稳定。