湘江干流水环境质量演变特征及其关键因素定量识别

为科学有效地保护湘江流域水环境,定量识别湘江干流主要水质指标的驱动因素,该研究基于1990~2016年水质监测数据及沿岸永州 长沙五市社会经济发展指标,采用Mann-Kendall检验法分析湘江干流水环境演变趋势,通过逐步回归分析确定各地区各水质指标主要驱动因素。结果表明：湘江干流COD_Mn、Cd、As整体呈下降趋势,上游BOD₅呈下降趋势,上中游NH₃-N呈上升趋势,中游衡阳、株洲市重金属Cr⁶⁺呈上升趋势,衡阳市TP呈上升趋势,中下游BOD₅呈上升趋势;定量追溯各水质指标影响因素得出工业污染是湘江干流重金属As、Cr⁶⁺、Cd主要驱动因素,永衡株潭地区NH₃-N,衡阳市BOD₅、COD_Mn、TP及衡株潭地区BOD₅均以农业污染影响为主;发现产业结构调整对干流水环境有显著影响,建议在流域产业结构调整过程中加强转型升级。     

个人规范对农户亲环境行为的影响分析——基于拓展的规范激活理论框架

农户的亲环境行为可在一定程度上缓解农业环境污染,为改善农业环境,探寻农户实施亲环境行为的原因所在,将农户环境污染感知、环境关心和社会规范加入规范激活理论框架对其进行拓展,在此基础上,通过构建结构方程模型和层次回归模型,利用陕西、山西、甘肃、安徽和江苏5省的实地调查数据,对农户的亲环境行为进行分析。结果表明:农户的亲环境个人规范、环境污染感知和环境关心均可对其亲环境行为产生直接的正向影响,且个人规范对行为的影响程度最大;结果意识、责任归属、农户的环境污染感知和环境关心均可对其亲环境的个人规范产生直接的正向影响,且其影响程度从高到低依次为:结果意识、责任归属、环境污染感知和环境关心;农户的环境污染感知和环境关心可同时对其亲环境行为产生直接和间接影响作用,而结果意识和责任归属仅可对其亲环境行为产生间接影响作用;社会规范可正向调节个人规范对农户亲环境行为的影响。     

基于MODIS数据的安徽省植被水分利用效率时空变化及影响因素

水分利用效率是衡量生态系统碳水循环耦合程度的重要指标。基于MODIS数据、土地覆盖类型数据和气象数据,估算安徽省植被水分利用效率(WUE）,采用趋势分析法和相关分析法对安徽省2000~2014年植被WUE的时空格局、变化趋势及影响因素进行研究。研究表明:（1）不同植被类型的WUE年均值差异明显,常绿阔叶林和常绿针叶林的WUE均值较高,分别达到1.66和1.69 gC?mm-1?m-2,而耕地的年均WUE最低,各植被类型的年均WUE按照“常绿针叶林>常绿阔叶林>灌木>草地>落叶阔叶林>针阔混交林>耕地”的顺序递减。植被年均WUE具有较强的空间分异性规律,整体上呈现南北高中间低的趋势,植被WUE的高值区主要分布在大别山区和皖南山区,分布范围与常绿针叶林、常绿阔叶林的分布范围基本一致。（2）安徽省2000~2014年植被WUE年内变化呈现出“增加-减小-增加-减小”的M状“双峰型”趋势,具有明显的季节差异,呈现出春季＞秋季＞夏季＞冬季的特征,各季节植被WUE的均值分别占植被WUE的32.58%、24.91%、29.27%、13.24%。（3）安徽省植被WUE动态变化受到降水影响显著的区域占比3.88%;气温显著影响的区域占比2.19%;降水显著影响的地区主要分布在林地范围内,温度显著影响的地区则位于耕地范围内,降水和气温综合显著影响所占面积最小,为0.11%;而植被WUE受气温和降水影响均不显著占比为93.82%;整体上,安徽省大部分地区的植被WUE变化主要受非气候因素影响。     

安徽省镇域经济发展水平的时空分异及空间格局影响因素

基于1 244个镇域研究单元的人均财政收入数据,采用多种空间方法分析安徽省镇域经济发展水平的时空差异特征,并运用地理加权回归（GWR）进行影响因素分析。结论如下：（1）从不平衡度指数看,该值在研究时序变化上先升后降,表明近期研究区内部差异程度有所减小;空间序列上南北差异较大,黄山、宣城等市内部差异较小,阜阳、亳州等市内部差异较大。（2）从Zip指数来看,虽然经济发展水平集中的力量逐渐减弱,但实力强劲乡镇的发展速度依然较快且其垄断性较强。（3）从空间分异格局看,高值区主要有两大组团,一处在皖南区集聚且逐渐向北扩展,但2016年有所缩减;另一处则贯穿南北形成条带状“串珠”,呈现先逐渐扩大后几乎消失的变化特征。中值区呈基底状分布在皖中区域。低值区分布在西北和东北,其中西北区逐渐向南扩大,东北区逐渐减小。（4）从空间集聚状态看,4种显著类型区均存在且以显著HH区和显著LL区为主。显著HH区在黄山市周围集聚,并逐渐向池州、宣城扩展;显著LL区在阜阳、亳州等市集聚,并逐渐向南延伸;显著HL区和显著LH区数量较少且集聚现象不明显。（5）从影响因素来看,基于回归系数的平均值对经济发展水平的影响从大到小依次为建成区人口/总人口>常住人口>从业人员>二三产业从业人员/从业人员>行政面积>建成区面积/总面积>工业增加值>人均工业产值>地均工业产值。     

羟胺强化Fenton反应降解水中氯酚

针对传统Fenton体系Fe（Ⅲ）累积和pH适用范围过窄等缺点,采用羟胺（HA）强化的HA-Fenton体系,以对氯苯酚（4-CP）为目标污染物进行降解实验,考察了Fe（Ⅱ）投加量、H2O2投加量、HA投加量和溶液pH等工艺条件对4-CP去除率的影响。实验结果表明：HA-Fenton体系适用于酸性和弱酸性条件,最佳pH范围为3.0~4.0;在溶液pH为3.0、Fe（Ⅱ）投加量为5.0 μmol/L、H2O2投加量为0.4 mmol/L、HA投加量为0.20 mmol/L的最适条件下,反应10 min, 4-CP去除率达64.25 %。     

微生物-光-电化学耦合技术降解污染物和回收能源的研究进展

微生物电化学技术能同时实现污染物去除和能量回收,但存在污染物去除种类有限及产能效率低的局限,近几年将可再生的太阳能引入微生物电化学技术的微生物-光-电化学耦合技术应运而生。本文简要介绍了微生物-光-电化学耦合技术的发展背景和研究现状,对该技术现有的耦合形式进行分类,并对各种形式的耦合机理进行详细的阐释,最后对其未来的发展进行了展望。     

Biodegradation of Poly(Aspartic Acid-Itaconic Acid) Copolymers by Miscellaneous Microbes from Natural Water

Poly(aspartic acid-itaconic acid) copolymers (PAI) is a new scale inhibitor for water treatment. Thus, it is necessary to investigate its biodegradability. The biodegradability of PAI was investigated through CO₂ evolution tests under different conditions based on determination of carbon dioxide production. The investigation results showed that the degradation rate of PAI on day 10 and day 28 were respectively 38.7 and 79.5%, indicating that PAI was one kind of easily biodegradable scale inhibitors. With the increase in the content of itaconic acid in copolymerization process, the biodegradability of PAI was significantly reduced. In addition, the high biodegradability might be attributed to the existence of C–N bone-structure and more –COO–. Finally, Cu²⁺ could decrease the degradation percentage and the enzyme inhibition effect of Cu²⁺ was not the linear effect, but the “low-dosage effect”.     

Sustainable Use of Coffee Husks For Reinforcing Polyethylene Composites

The utilization of the coffee husk fiber (CHF) from the coffee industry as a reinforcing filler in the preparation of a cost-effective thermoplastic based composite was explored in this study. The chemical composition and thermal properties of the CHF were investigated and compared with those of wood fiber (WF). CHF proved to be mainly composed of cellulose, hemicellulose and lignin, and exhibited similar thermal behavior to WF. High density polyethylene (HDPE) composites with CHF loadings of from 40 to 70% were prepared using melt processing and extrusion. The processing properties, mechanical behavior, water absorption and thermal performance of these composites were investigated. The effect of maleated polyethylene (MAPE) used as a coupling agent on the composite was explored. The experimental results showed that increasing the CHF loading in the HDPE matrix resulted in an increase in the modulus and thermal properties of the composites, but resulted in poor water resistance. The addition of a 4% MAPE significantly improved the interfacial behavior of the hydrophilic lignocellulosic fiber and the hydrophobic polymer matrix.     

Preparation and Characterization of Collagens from the Skin of Northern Snakehead (<Emphasis Type="Italic">Channa argus)</Emphasis>

Channa argus, a type of snakehead fish native to China, is a popular food fish in certain Asian countries but is a known destructive invasive species in the US. In this study, the two collagens, i.e. acid-soluble collagen (ASC) and pepsin-solubilized collagen (PSC), were obtained from C. argus skin. The yield of ASC was 28.0% and that of PSC was 16.8% on the dry bases. The collagens were identified as the collagen of type I by SDS–PAGE patterns. The Tds were approximately 27.0?°C. Similar ultraviolet spectra of both collagens were observed. Fourier Transform infrared spectra indicated PSC structure had a little change due to the loss of terminal domains by pepsin digestion. The results of XRD proved that the two collagens retained their helical structures. The results suggest that the collagens isolated from C. argus can potentially be alternative sources of vertebrate collagens for use in the food and other industries.     

Highly efficient conversion of sugarcane bagasse pretreated with liquid hot water into ethanol at high solid loading

Liquid hot water (LHW), an environmental-friendly physico-chemical treatment, was applied to pretreat the sugarcane bagasse (SCB). Tween80, a non-ionic surfactant, was used to enhance the enzymatic hydrolysis of the pretreated SCB. It found that 0.125 mL Tween80 /g dry matter could make the maximum increase (33.2%) of the glycan conversion of the LHW-pretreated SCB. A self-designed laboratory facility with a plate-and-frame impeller was applied to conduct batch hydrolysis, fed-batch hydrolysis, and the process of high-temperature (50°C) fed-batch hydrolysis following low-temperature (30°C) simultaneous saccharification and fermentation (SSF) which was adopted to overcome the incompatible optimum temperature of saccharification and fermentation in the SSF process. After hydrolyzing LHW-pretreated SCB for 120 h with commercial cellulase, the total sugar concentration and glycan conversion obtained from fed-batch hydrolysis were 91.6 g/L and 68.3%, respectively, which were 9.7 g/L and 7.3% higher than those obtained from batch hydrolysis. With Saccharomyces cerevisiae Y2034 fermenting under the non-sterile condition, the ethanol production and theoretical yield obtained from the process of SSF after fed-batch hydrolysis were 55.4 g/L and 88.3% for 72h, respectively, which were 15.5 g/L and 24.7% higher than those from separate fed-batch hydrolysis and fermentation. The result of this work was superior to the reported results obtained from the LHW-pretreated SCB.