Arsenic speciation in polychaetes (Annelida) and sediments from the intertidal mudflat of Sundarban mangrove wetland, India

This paper documents the concentration of total arsenic and individual arsenic species in four soft-bottom benthic polychaetes (Perenereis cultifera, Ganganereis sootai, Lumbrinereis notocirrata and Dendronereis arborifera) along with host sediments from Sundarban mangrove wetland, India. An additional six sites were considered exclusively for surface sediments for this purpose. Polychaetes were collected along with the host sediments and measured for their total arsenic content using inductively coupled plasma mass spectrometry. Arsenic concentrations in polychaete body tissues varied greatly, suggesting species-specific characteristics and inherent peculiarities in arsenic metabolism. Arsenic was generally present in polychaetes as arsenate (As^V ranges from 0.16 to 0.50 mg kg^?1) or arsenite (As^III ranges from 0.10 to 0.41 mg kg^?1) (30–53 % as inorganic As) and dimethylarsinic acid (DMA^V <1–25 %). Arsenobetaine (AB < 16 %), and PO₄-arsenoriboside (8–48 %) were also detected as minor constituents, whilst monomethylarsonic acid (MA^V) was not detected in any of the polychaetes. The highest total As (14.7 mg kg^?1 dry wt) was observed in the polychaete D. arborifera collected from the vicinity of a sewage outfall in which the majority of As was present as an uncharacterised compound (10.3 mg kg^?1 dry wt) eluted prior to AB. Host sediments ranged from 2.5 to 10.4 mg kg^?1 of total As. This work supports the importance of speciation analysis of As, because of the ubiquitous occurrence of this metalloid in the environment, and its variable toxicity depending on chemical form. It is also the first work to report the composition of As species in polychaetes from the Indian Sundarban wetlands.     

Degradable polymers: The role of the degradation environment

The degradability of several degradable polymers was examined using three types of degradation environments. These include exposure in a laboratory-scale composting test system containing material representative of the organic fraction of municipal solid waste (MSW), exposure in a thermal hydrolytic environment consisting of water at 60‡C, and exposure in a thermal-oxidative, dry oven environment of 60‡C. The results of the investigation clearly indicate that, in addition to chemical and biological activity which can lead to polymer degradation, physical restructuring and reorganization of the macromolecular structure may also occur at temperatures typically found in a compost environment, resulting in changes in the mechanical properties of the polymer films. In the case of the polyethylene-modified polymers evaluated in this study, all behaved similarly, but differently from the other polymer types. The polyethylene-based films appeared to be susceptible to oxidative degradation and should degrade in a composting environment providing that there is sufficient air in contact with the film for a sufficient period of time. However, when exposed in a laboratory composter, it appears that although ideal temperature-time curves may be obtained, the test time period was insufficient in comparison to the induction period required to achieve the desired thermal oxidative degradation. Issued as NRCC No. 37620.     

Hydrogen peroxide for physicochemically degrading petroleum-contaminated soils

Catalyzed hydrogen peroxide was applied to contaminated soil at an equipment storage yard in Reno, Nevada, that had also been used as a dump for motor oil and diesel fuel for twenty years. The site is only a quarter mile from the Truckee River—a principal source of Reno's drinking water. This article details hydrogen peroxide's advantages, disadvantages, costs, and treatment for reducing to below the 100 mg/kg Nevada action level the petroleum hydrocarbons in the yard's arid soil, which is characterized by low organic carbon content and low manganese oxide content.     

Uptake and depuration of 131I from labelled diatoms (Skeletonema costatum) to the edible periwinkle (Littorina littorea)

Uptake and depuration of (131)I into winkles through consumption of the diatom Skeletonema costatum is described. The work follows on from previous studies that investigated the uptake of iodine into winkles from seawater and seaweed. Incorporation of (131)I in S. costatum from labelled seawater followed linear first-order kinetics with an uptake half-time of 0.40 days. Iodine uptake in winkles from labelled S. costatum also followed linear first-order kinetics, with a calculated equilibrium concentration (C(infinity)) of 42Bqkg(-1) and a transfer factor (TF) of 1.1x10(-4) with respect to labelled diatom food. This TF is lower than that observed for uptake of (131)I in winkles from labelled seaweed. For the depuration stage, a biphasic sequence with biological half-lives of 1.3 and 255 days was determined. The first phase is biokinetically important, given that winkles can lose two-thirds of their activity during that period. This study shows that, whilst winkles can obtain radioactive iodine from phytoplankton consumption, they do not retain the majority of that activity for very long. Hence, compared with other exposure pathways, such as uptake from seawater and macroalgae, incorporation from phytoplankton is a relatively minor exposure route.     

Treatment of polychlorinated biphenyls in two surface soils using catalyzed H₂O₂ propagations

Two surface soils contaminated with polychlorinated biphenyls (PCBs) collected from Superfund sites in the New England region of the United States, Fletcher Paints and Merrimack Industrial Metals, were evaluated for field treatment at the bench level using catalyzed H₂O₂ propagations (CHP—modified Fenton’s reagent). The two soils were first evaluated for the potential for in situ treatment based on two criteria: (1) temperature (<40 °C after CHP reagent addition), and (2) hydrogen peroxide longevity (>24 h). In situ CHP remediation was more applicable to the Fletcher soil, while the Merrimack soil was better suited to ex situ treatment based on temperature increases and hydrogen peroxide lifetimes. Using the highest hydrogen peroxide concentrations appropriate for in situ treatment in each soil, PCB destruction was 94% in the Fletcher soil but only 48% in the Merrimack soil. However, 98% PCB destruction was achieved in the Merrimack soil using conditions more applicable to ex situ treatment (higher hydrogen peroxide concentrations with temperatures >40 °C). Analysis of degradation products by gas chromatography/mass spectroscopy showed no detectable chlorinated degradation products, suggesting that the products of PCB oxidation were rapidly dechlorinated and degraded. The results of this research document that the two PCB-contaminated soils studied can be effectively treated using aggressive CHP conditions, and that such a detailed bench study provides important information before implementing field treatment.     

Storm flow export of metolachlor from a coastal plain watershed

Abstract

During an 18‐month (1994–1995) survey of the surface water in an Atlantic Coastal Plain watershed, metolachlor was most frequently detected during storm flow events. Therefore, a sampling procedure, focused on storm flow, was implemented in June of 1996. During 1996, three tropical cyclones made landfall within 150 km of the watershed. These storms, as well as several summer thunderstorms, produced six distinct storm flow events within the watershed. Metolachlor was detected leaving the watershed during each event. In early September, Hurricane Fran produced the largest storm flow event and accounted for the majority of the metolachlor exports. During the storm event triggered by Hurricane Fran, the highest daily average flow (7.5 m² s^‐1) and highest concentration (5.1 μg L^‐1) ever measured at the watershed outlet were recorded. Storm flow exports leaving the watershed represented 0.1 g ha^‐1 or about 0.04% of active ingredient applied.     

Pesticide concentration variations correlated with well bore volume removal in shallow coastal plain ground water

Abstract

The effects of well bore volume removal (V_n) on the concentration of alachlor [2‐chloro‐N‐(2,6‐diethylphenyl)‐N‐(methoxy methyl) acetamide] and prometon (6‐methoxy‐N,N'‐bis(1‐methylethyl)‐1,3,5‐triazine‐2,4‐diamine] in ground water obtained from three monitoring wells installed in the Coastal Plain region of North Carolina was investigated. Seasonal effects were also investigated by conducting the exercise in February and May. In the majority of cases, the lowest pesticide concentrations occurred in the initial well bore volume (V₁ = stagnant water). Removal of additional well bore volumes (V₂ to V₁₀) from two of the wells resulted in pesticide concentrations that did not vary substantially. This indicates that a representative aquifer sample was obtainable, in most cases from these wells, after removal of the initial well bore volume. In contrast, a third well required the purging of two well bore volumes before a stable alachlor concentration was achieved. Seasonal effects of bore volume removal vs. pesticide concentrations for the three wells were not significant (P > 0.05). It was concluded that a protocol for improved accuracy in pesticide analyses of ground water can be obtained by establishing a pesticide concentration‐purging (well bore volume) relationship for each well.     

Programmable Instrument for Controlling Atmospheric Sampling

The University of Arizona and the Pima County Air Pollution Control District conducted a comparison study of the following aerosol samplers: a standard high-volume sampler, a high-volume sampler fitted with a size selective inlet, and a dichotomous virtual impactor. Over sixty samples were collected with the colocated samplers during the first six months of 1981. The concentration (μg/m³) of suspended particulate matter and of sulfate was determined for all the samples, while the concentration of four lithophilic elements (Ca, Fe, Mg, and K) was determined on one third of the samples. Well-defined linear relationships for suspended particulate matter and sulfate were found to exist between each of the three sample collection methods over the concentrafion range encountered in this study. For these samples, there were significant differences in the particulate mass and large particle lithophilic element concentrations collected by each device. However, sulfate values obtained from the three samplers were in excellent agreement with each other. This suggests that the inlet collection efficiency for large particles differs significantly for these three sampling devices. Since the size selective inlet and the dichotomous virtual impactor samplers are each designed for collection of inhalable particles (particles of 15 μm aerodynamic diameter and smaller), they would have been expected to measure approximately equivalent particle mass concentrations. Thus, these differences are important to those interested in selecting a method for measuring airborne particle mass concentrations.     

Effects of Operating Variables on PAH Emissions and Mutagenicity of Emissions from Woodstoves

As part of the Integrated Air Cancer Project, the U.S. Environmental Protection Agency (EPA) has conducted field emission measurement programs in Raleigh, North Carolina, and Boise, Idaho, to identify the potential mutagenic Impact of residential wood burning and motor vehicles on ambient and indoor air. These studies included the collection of emission samples from chimneys serving wood burning appliances. Parallel projects were undertaken in Instrumented woodstove test laboratories to quantify woodstove emissions during operations typical of in-house usage but under more controlled conditions.

Three woodstoves were operated In test laboratories over a range of burnrates, burning eastern oak, southern yellow pine, or western white pine. Two conventional stoves were tested at an altitude of 90 m. One of the conventional stoves and a catalytic stove were tested at an altitude of 825 m.

Decreasing burnrate increased total paniculate emissions from the conventional stoves while the catalytic stove's total particulate emissions were unaffected. There was no correlation of total particulate emissions with altitude whereas total polynuclear aromatic hydrocarbon (PAH) emissions were higher at the lower altitude. Mutagenicity of the catalytic stove emissions was higher than emissions from the conventional stove. Emissions from burning pine were more mutagenic than emissions from oak.