铜镉复合胁迫下温度对小麦幼苗生长及其对铜、镉和矿质营养元素吸收与各元素在亚细胞分布的影响

为了研究重金属复合胁迫下温度变化对陆生植物的毒性效应的影响,实验采用水培的方法,设置对照和Cu-Cd复合胁迫(10 μmol·L1 Cu+10μmol·L-1Cd)2个处理,每个处理分别设置3个不同的培养温度(8/4℃、25/20℃和35/30℃),对小麦进行48 h的暴露实验,测定小麦幼苗的生长及其对重金属和矿质营养...     

Effect of Cu-based metal organic framework (Cu-MOF) loaded with TiO2 on the photocatalytic degradation of rhodamine B dye

Environmental Science and Pollution Research - Using copper nitrate trihydrate as the copper source, TiO2@Cu-MOF nanocomposites were prepared by a one-step crystallization method, and the effect of...     

Effect of temperature on anoxic metabolism of nitrites to nitrous oxide by polyphosphate accumulating organisms

Temperature is an important physical factor, which strongly influences biomass and metabolic activity. In this study, the effects of temperature on the anoxic metabolism of nitrite(NO-2) to nitrous oxide(N2O) by polyphosphate accumulating organisms, and the process of the accumulation of N2O(during nitrite reduction), which acts as an electron acceptor, were investigated using 91% ± 4% Candidatus Accumulibacter phosphatis sludge. The results showed that N2O is accumulated when Accumulibacter first utilize nitrite instead of oxygen as the sole electron acceptor during the denitrifying phosphorus removal process. Properties such as nitrite reduction rate, phosphorus uptake rate, N2O reduction rate, and polyhydroxyalkanoate degradation rate were all influenced by temperature variation(over the range from 10 to 30°C reaching maximum values at 25°C). The reduction rate of N2O by N2O reductase was more sensitive to temperature when N2O was utilized as the sole electron acceptor instead of NO2, and the N2O reduction rates, ranging from 0.48 to 3.53 N2O-N/(hr·g VSS), increased to 1.45 to 8.60 mg N2O-N/(hr·g VSS). The kinetics processes for temperature variation of 10 to 30°C were(θ1 = 1.140–1.216 and θ2= 1.139–1.167). In the range of 10°C to 30°C, almost all of the anoxic stoichiometry was sensitive to temperature changes. In addition, a rise in N2O reduction activity leading to a decrease in N2O accumulation in long term operations at the optimal temperature(27°C calculated by the Arrhenius model).     

Electrokinetic enhancement removal of heavy metals from industrial wastewater sludge

An enhanced electrokinetic process for removal of metals (Cr, Cu, Fe, Ni, Pb, Zn) from an industrial wastewater sludge was performed. The electrokinetic experiments were conducted under a constant potential gradient (1.25 V cm(-1)) with processing fluids of tap water (TW), sodium dodecylsulfate (SDS) and citric acid (CA) for 5 days. Results showed that metal removal efficiency of heavy metals for EK-TW, EK-SDS and EK-CA systems are 11.2-60.0%, 37.2-76.5%, and 43.4-78.0%, respectively. A highest metal removal performance was found in EK-CA system. The removal priority of investigated metals from sludge by EK process was found as: Cu > Pb > Ni > Fe > Zn > Cr. The results of sequential extraction analysis revealed that the binding forms of heavy metals with sludge after electrokinetic process were highly depend upon the processing fluid operated. It was found that the binding forms of metals with sludge were changed from the more difficult extraction type (residual and sulfate fractions) to easier extraction types (exchangeable, sorbed, and organic fraction) after treatment by electrokinetic process. Results imply that if a proper treatment technology is followed by this EK process to remove metals more effectively, this treated sludge will be more beneficial for sludge utilization afterwards. Before it was reused, the risk associated with metals of more mobile forms to the environment need to be further investigated. The cost analysis was also evaluated for the investigated electrokinetic systems.