Human factors and tidal influences on water quality of an urban river in Can Tho, a major city of the Mekong Delta, Vietnam

In this study, we focused on water quality in an urban canal and the Mekong River in the city of Can Tho, a central municipality of the Mekong Delta region, southern Vietnam. Water temperature, pH, electrical conductivity, BOD₅, COD_Cr, Na⁺, Cl^?, NH₄ ⁺?N, SO₄ ^2??S, NO₃ ^??N, and NO₂ ^??N for both canal and river, and tide level of the urban canal, were monitored once per month from May 2010 to April 2012. The urban canal is subject to severe anthropogenic contamination, owing to poor sewage treatment. In general, water quality in the canal exhibited strong tidal variation, poorer at lower tides and better at higher tides. Some anomalies were observed, with degraded water quality under some high-tide conditions. These were associated with flow from the upstream residential area. Therefore, it was concluded that water quality in the urban canal changed with a balance between dilution effects and extent of contaminant supply, both driven by tidal fluctuations in the Mekong River.     

Regional status assessment of stony corals in the US Virgin Islands

States may protect coral reefs using biological water quality standards outlined by the Clean Water Act. This requires biological assessments with indicators sensitive to human disturbance and regional, probability-based survey designs. Stony coral condition was characterized on a regional scale for the first time in the nearshore waters of the US Virgin Islands (USVI). Coral composition, abundance, size, and health were assessed at 66 stations in the St. Croix region in fall 2007 and at 63 stations in the St. Thomas and St. John region in winter 2009. Indicators were chosen for their sensitivity to human disturbance. Both surveys were probability-based (random) designs with station locations preselected from areas covered by hardbottom and coral reef substrate. Taxa richness was as high as 21 species but more than half the area of both regions exhibited taxa richness of <10 species in the 25 m² transect area. Coral density was as high as 5 colonies m^?2 but more than half the area of both regions had <2 colonies m^?2. Both regions showed similar dominant species based on frequency of occurrence and relative abundance. Because of large colony sizes, Montastrea annularis provided more total surface area and live surface area than more abundant species. The surveys establish baseline regional conditions and provide a foundation for long-term regional monitoring envisioned by the USVI Department of Planning and Natural Resources. The probabilistic sampling design assures the data can be used in Clean Water Act reporting.     

Spiders in mountain habitats of the Giant Mountains

Ground-living spiders were studied using modified pitfall traps during several years in four characteristic habitats in Giant Mountains (Krkono?e Mts.), the High Sudetes, Czech Republic: alpine tundra, subalpine mire, tall-herb stand at the bottom of a glacial corrie, and decaying mountain spruce forest. Ecological and zoogeographical aspects of spider communities were analysed. The spider communities of alpine tundra, subalpine mire, and glacial corrie exhibited long-term stability, whereas the community of decaying mountain forest changed during observations. Small linyphiid spiders, dominating in mature forest, were gradually replaced by larger Iycosid and gnaphosid species. Zoogeographic characterization of mountain habitats was made based on species exhibiting disjunctive area. In contrast to plants, for spiders of boreal origin alpine tundra is the most important habitat for survival, followed by screes, mires, spruce forests, and corries.     

Support for maternal manipulation of developmental nutrition in a facultatively eusocial bee, <Emphasis Type="Italic">Megalopta genalis</Emphasis> (Halictidae)

Developmental maternal effects are a potentially important source of phenotypic variation, but they can be difficult to distinguish from other environmental factors. This is an important distinction within the context of social evolution, because if variation in offspring helping behavior is due to maternal manipulation, social selection may act on maternal phenotypes, as well as those of offspring. Factors correlated with social castes have been linked to variation in developmental nutrition, which might provide opportunity for females to manipulate the social behavior of their offspring. Megalopta genalis is a mass-provisioning facultatively eusocial sweat bee for which production of males and females in social and solitary nests is concurrent and asynchronous. Female offspring may become either gynes (reproductive dispersers) or workers (non-reproductive helpers). We predicted that if maternal manipulation plays a role in M. genalis caste determination, investment in daughters should vary more than for sons. The mass and protein content of pollen stores provided to female offspring varied significantly more than those of males, but volume and sugar content did not. Sugar content varied more among female eggs in social nests than in solitary nests. Provisions were larger, with higher nutrient content, for female eggs and in social nests. Adult females and males show different patterns of allometry, and their investment ratio ranged from 1.23 to 1.69. Adult body weight varied more for females than males, possibly reflecting increased variation in maternal investment in female offspring. These differences are consistent with a role for maternal manipulation in the social plasticity observed in M. genalis.     

Impact of “Designated Smoking Area” Policy on Nicotine Vapor and Particle Concentrations in a Modern Office Building

A series of measurements of nicotine vapor and particle concentrations were carried out in a modern office building. The measurement program was designed to document the impact of the new smoking policy (e.g. smoking restricted to two specific areas) on air quality in various parts of the building.

Measurements at over 30 locations examined areas where smoking was restricted, where smoking was permitted, and where an air handler shared the load of a designated smoking area. These measurements were taken at the same locations before and after the policy was Implemented.

The measurement results Indicated that: ? After the policy was implemented, general employee exposure to nicotine vapor (as a surrogate for all environmental tobacco smoke) was reduced by about 98 percent on most floors. Other patterns related to spillover from designated smoking areas and changes in the designated smoking areas themselves are described in the paper.

? Substantial reductions in exposure to nicotine vapor were found even for those general office areas which had the highest concentrations after the policy was implemented.

     

Deriving environmental quality standards in European surface waters: when are there too few data?

Recent technical guidance has been published by the European Commission that outlines methodologies for the derivation of Environmental Quality Standards (EQS) in European surface waters under the Water Framework Directive (WFD). The guidance allows the derivation of a long-term EQS from a small dataset. Specifically an EQS can be derived from just three acute data points, although the safety factors built into such an EQS are large (e.g. up to a factor of 1,000). Large safety factors make such EQS uncertain, and often difficult to achieve in practice. We examine dataset requirements for the derivation of EQS and specifically the minimum number of tests needed for setting EQS for long-term chemical exposures that result in reduced relative uncertainty, as assessed simply through the reduction in standard deviation of the means of the values derived. Using ecotoxicity datasets for four example chemicals, for which EQS have been derived in many jurisdictions, we show that variation in the EQS is greatest when using the minimum dataset allowable under the WFD guidance, but decreases rapidly when seven or more datapoints are available. Increasing the minimum number of ecotoxicity data in deriving an EQS results in a greater understanding of ecotoxicological effects. With this knowledge, the mitigating effects of water chemistry can be accounted for in deriving an EQS, even with relatively limited datasets. The new guidance suggests “simplistic” approaches to account for chemical availability, but does not detail how this might be undertaken. We provide examples of ways by which water chemistry effects can be included in deriving implementable EQS for metals with relatively few reliable and relevant data.     

Emissions concerns during renovation in the healthcare setting: Asbestos abatement of floor tile and mastic in medical facilities

Healthcare facilities undergoing renovation have specific concerns that are exacerbated when the restoration requires asbestos abatement of aged floor tile and mastic. The current state of the art for removal of these materials involves manual removal of floor tile and chemical stripping of mastic. Utilization of these stripping chemicals is a concern for facilities whose perception is based on a safe, caring, and healthy environment. In this study, wet grinding is evaluated as an alternative to chemical stripping of asbestos-containing floor tile mastic. This study endeavors to answer the question; what is the difference between these two methodologies in terms of their operational efficacy and suitability in the healthcare setting. Wet grinding and chemical stripping are evaluated in a side-by-side comparison using a mixed methods approach. The data shows that the methodologies are statistically similar in terms of their cost and emissions data. The data indicates that the benefits associated with the wet grinding method offer advantages that are not present using the chemical stripping method. This study also demonstrates that wet grinding is a viable alternative to chemical stripping especially in healthcare facilities.     

Behavior of an MBT waste in monotonic triaxial shear tests

Legislation in some parts of the world now requires municipal solid waste (MSW) to be processed prior to landfilling to reduce its biodegradability and hence its polluting potential through leachate and fugitive emission of greenhouse gases. This pre-processing may be achieved through what is generically termed mechanical–biological-treatment (MBT). One of the major concerns relating to MBT wastes is that the strength of the material may be less than for raw MSW, owing to the removal of sheet, stick and string-like reinforcing elements during processing. Also, the gradual increase in mobilized strength over strains of 30% or so commonly associated with unprocessed municipal solid waste may not occur with treated wastes. This paper describes a series of triaxial tests carried out to investigate the stress–strain–strength characteristics of an MBT waste, using a novel digital image analysis technique for the determination of detailed displacement fields over the whole specimen. New insights gained into the mechanical behavior of MBT waste include the effect of density on the stress–strain response, the initial 1-D compression of lightly consolidated specimens, and the likely reinforcing effect of small sheet like particles remaining in the waste.     

Solid Absorbent Method for Sampling and Analysis of Nitrogen Dioxide in Ambient Air

A sampling and analysis system was developed for measuring concentrations of nitrogen dioxide in ambient air. Copper shot was found to be an effective absorbent for collecting samples at ambient levels. The analytical system was based on the desorption of the sample from the copper by heating in a hydrogen carrier stream. The desorbed sample was then determined by a combination of catalytic pyrolysis, which converted it to ammonia, and a Coulson Conductivity Detector. Data are presented showing overall recovery, effects of storage of collected samples, results for 24-hour sampling and interferences. Studies indicated the feasibility of the method for short time sampling as well as for 24-hour sampling periods. The detection limit was shown to be as little as 100 ng NO₂ in laboratory studies. This solid absorbent method provides a simple, convenient, and compact means for air sampling.