Support for maternal manipulation of developmental nutrition in a facultatively eusocial bee, <Emphasis Type="Italic">Megalopta genalis</Emphasis> (Halictidae)

Developmental maternal effects are a potentially important source of phenotypic variation, but they can be difficult to distinguish from other environmental factors. This is an important distinction within the context of social evolution, because if variation in offspring helping behavior is due to maternal manipulation, social selection may act on maternal phenotypes, as well as those of offspring. Factors correlated with social castes have been linked to variation in developmental nutrition, which might provide opportunity for females to manipulate the social behavior of their offspring. Megalopta genalis is a mass-provisioning facultatively eusocial sweat bee for which production of males and females in social and solitary nests is concurrent and asynchronous. Female offspring may become either gynes (reproductive dispersers) or workers (non-reproductive helpers). We predicted that if maternal manipulation plays a role in M. genalis caste determination, investment in daughters should vary more than for sons. The mass and protein content of pollen stores provided to female offspring varied significantly more than those of males, but volume and sugar content did not. Sugar content varied more among female eggs in social nests than in solitary nests. Provisions were larger, with higher nutrient content, for female eggs and in social nests. Adult females and males show different patterns of allometry, and their investment ratio ranged from 1.23 to 1.69. Adult body weight varied more for females than males, possibly reflecting increased variation in maternal investment in female offspring. These differences are consistent with a role for maternal manipulation in the social plasticity observed in M. genalis.     

Impact of “Designated Smoking Area” Policy on Nicotine Vapor and Particle Concentrations in a Modern Office Building

A series of measurements of nicotine vapor and particle concentrations were carried out in a modern office building. The measurement program was designed to document the impact of the new smoking policy (e.g. smoking restricted to two specific areas) on air quality in various parts of the building.

Measurements at over 30 locations examined areas where smoking was restricted, where smoking was permitted, and where an air handler shared the load of a designated smoking area. These measurements were taken at the same locations before and after the policy was Implemented.

The measurement results Indicated that: ? After the policy was implemented, general employee exposure to nicotine vapor (as a surrogate for all environmental tobacco smoke) was reduced by about 98 percent on most floors. Other patterns related to spillover from designated smoking areas and changes in the designated smoking areas themselves are described in the paper.

? Substantial reductions in exposure to nicotine vapor were found even for those general office areas which had the highest concentrations after the policy was implemented.

     

Deriving environmental quality standards in European surface waters: when are there too few data?

Recent technical guidance has been published by the European Commission that outlines methodologies for the derivation of Environmental Quality Standards (EQS) in European surface waters under the Water Framework Directive (WFD). The guidance allows the derivation of a long-term EQS from a small dataset. Specifically an EQS can be derived from just three acute data points, although the safety factors built into such an EQS are large (e.g. up to a factor of 1,000). Large safety factors make such EQS uncertain, and often difficult to achieve in practice. We examine dataset requirements for the derivation of EQS and specifically the minimum number of tests needed for setting EQS for long-term chemical exposures that result in reduced relative uncertainty, as assessed simply through the reduction in standard deviation of the means of the values derived. Using ecotoxicity datasets for four example chemicals, for which EQS have been derived in many jurisdictions, we show that variation in the EQS is greatest when using the minimum dataset allowable under the WFD guidance, but decreases rapidly when seven or more datapoints are available. Increasing the minimum number of ecotoxicity data in deriving an EQS results in a greater understanding of ecotoxicological effects. With this knowledge, the mitigating effects of water chemistry can be accounted for in deriving an EQS, even with relatively limited datasets. The new guidance suggests “simplistic” approaches to account for chemical availability, but does not detail how this might be undertaken. We provide examples of ways by which water chemistry effects can be included in deriving implementable EQS for metals with relatively few reliable and relevant data.     

Emissions concerns during renovation in the healthcare setting: Asbestos abatement of floor tile and mastic in medical facilities

Healthcare facilities undergoing renovation have specific concerns that are exacerbated when the restoration requires asbestos abatement of aged floor tile and mastic. The current state of the art for removal of these materials involves manual removal of floor tile and chemical stripping of mastic. Utilization of these stripping chemicals is a concern for facilities whose perception is based on a safe, caring, and healthy environment. In this study, wet grinding is evaluated as an alternative to chemical stripping of asbestos-containing floor tile mastic. This study endeavors to answer the question; what is the difference between these two methodologies in terms of their operational efficacy and suitability in the healthcare setting. Wet grinding and chemical stripping are evaluated in a side-by-side comparison using a mixed methods approach. The data shows that the methodologies are statistically similar in terms of their cost and emissions data. The data indicates that the benefits associated with the wet grinding method offer advantages that are not present using the chemical stripping method. This study also demonstrates that wet grinding is a viable alternative to chemical stripping especially in healthcare facilities.     

Behavior of an MBT waste in monotonic triaxial shear tests

Legislation in some parts of the world now requires municipal solid waste (MSW) to be processed prior to landfilling to reduce its biodegradability and hence its polluting potential through leachate and fugitive emission of greenhouse gases. This pre-processing may be achieved through what is generically termed mechanical–biological-treatment (MBT). One of the major concerns relating to MBT wastes is that the strength of the material may be less than for raw MSW, owing to the removal of sheet, stick and string-like reinforcing elements during processing. Also, the gradual increase in mobilized strength over strains of 30% or so commonly associated with unprocessed municipal solid waste may not occur with treated wastes. This paper describes a series of triaxial tests carried out to investigate the stress–strain–strength characteristics of an MBT waste, using a novel digital image analysis technique for the determination of detailed displacement fields over the whole specimen. New insights gained into the mechanical behavior of MBT waste include the effect of density on the stress–strain response, the initial 1-D compression of lightly consolidated specimens, and the likely reinforcing effect of small sheet like particles remaining in the waste.     

Solid Absorbent Method for Sampling and Analysis of Nitrogen Dioxide in Ambient Air

A sampling and analysis system was developed for measuring concentrations of nitrogen dioxide in ambient air. Copper shot was found to be an effective absorbent for collecting samples at ambient levels. The analytical system was based on the desorption of the sample from the copper by heating in a hydrogen carrier stream. The desorbed sample was then determined by a combination of catalytic pyrolysis, which converted it to ammonia, and a Coulson Conductivity Detector. Data are presented showing overall recovery, effects of storage of collected samples, results for 24-hour sampling and interferences. Studies indicated the feasibility of the method for short time sampling as well as for 24-hour sampling periods. The detection limit was shown to be as little as 100 ng NO₂ in laboratory studies. This solid absorbent method provides a simple, convenient, and compact means for air sampling.     

Book Reviews

ION‐SELECTIVE ELECTRODES IN ANALYTICAL CHEMISTRY, Vol. 2 by H. Freiser (ed.), Plenum Press, New York, 1980.

CARCINOGENESIS AND MUTAGENESIS by Myron A. Mehlman, Morris F. Cranmer and Raymond E. Shapiro, from the Journal of Environmental Pathology and Toxicology (Official Organ of the American College of Toxicology), 388 pages and 135 tables and figures, 1977, linen, format 261 × 178 mm, ISBN 0–930376–02–1, printed by Pathotox Publishers, Inc., Park Forest South, Illinois 60466, $23.00.     

Geographic distribution and environmental characterization of livestock production systems in Eastern Africa

The central role played by livestock in the livelihoods of rural households in the developing world is seldom fully appreciated by policy makers, development agencies and donors. Knowledge gaps in the geographic distribution and environmental determinants of farming systems, especially if viewed through the livestock lens, compound this problem. We have produced a map of pastoral, agro-pastoral and mixed farming systems across Eastern Africa, by analysing datasets collected in the framework of livelihood analysis. Input data were gathered between 2000 and 2007 by various emergency and development agencies for Djibouti, Eritrea, Kenya, Somalia, Uganda and parts of Ethiopia and Sudan. A quantitative definition of the production systems is adopted, based on the ratio of livestock- to crop-derived income. The resulting livelihood-based map of livestock production systems was compared through correspondence analysis to an alternative livestock production systems map, produced independently from environmental data. Convergence between the two mapping approaches was evident. The geographic distribution of the livestock production systems was also modelled using multivariate analysis of remotely sensed and other geospatial datasets. Models show high statistical accuracy, and were thus used to fill the gaps in the observed distribution of livestock production systems. Finally, selected environmental factors underpinning the systems (agro-climatology, human and livestock populations and land cover) were analysed in detail, enabling the livestock production systems to be characterized in terms of them. The regional scope of the map, as well as its direct link with a vast amount of livelihood information, render it a valuable tool for a range of development and research applications, including those related to global change.     

Habitat type-based bioaccumulation and risk assessment of metal and As contamination in earthworms, beetles and woodlice

The present study investigated the contribution of environmental factors to the accumulation of As, Cd, Cu, Pb and Zn in earthworms, beetles and woodlice, and framed within an exposure assessment of the European hedgehog. Soil and invertebrate samples were collected in three distinct habitat types. Results showed habitat-specific differences in soil and invertebrate metal concentrations and bioaccumulation factors when normalized to soil metal concentration. Further multiple regression analysis showed residual variability (habitat differences) in bioaccumulation that could not be fully explained by differences in soil metal contamination, pH or organic carbon (OC). Therefore, the study demonstrated that in bioaccumulation studies involving terrestrial invertebrates or in risk assessment of metals, it is not sufficient to differentiate habitat types on general soil characteristics such as pH and/or OC alone. Furthermore, simple generic soil risk assessments for Cd and Cu showed that risk characterization was more accurate when performed in a habitat-specific way.     

A Simple Technique for Determining The Maximum Ground Level Concentration of An Elevated Gaseous Release

A screening technique has been developed to determine the maximum one-hour ground level concentration of a gaseous emission from a stack located In flat terrain. The method does not require the use of a computer and eliminates the usual trial and error calculations. An infinite mixing height is assumed. It involves a linear or quadratic solution of the gaussian plume diffusion as a function of the effective stack height and a linear approximation of the Briggs plume rise equation. The linear approximation of the former gives results that are within 5 % of the gaussian plume results for stability criteria A, B, and C. For stability criteria D, the difference can be as great as 80%. If a quadratic estimation Is used, the differences are less than 3% for stability criteria A, B, and C, and are within 18% for stability criteria D. A linear approximation is used for the Briggs plume rise equation. This gives results within 4% of the Briggs equation. Overall, this is a simple straightforward approximation which gives results which can be used to determine if more sophisticated procedures are necessary.