The Adsorptive Capacity of Vapor-Phase Mercury Chloride onto Powdered Activated Carbon Derived from Waste Tires

Abstract

Injection of powdered activated carbon (PAC) upstream of particulate removal devices (such as electrostatic precipitator and baghouses) has been used effectively to remove hazardous air pollutants, particularly mercury-containing pollutants, emitted from combustors and incinerators. Compared with commercial PACs (CPACs), an alternative PAC derived from waste tires (WPAC) was prepared for this study. The equilibrium adsorptive capacity of mercury chloride (HgCl₂) vapor onto the WPAC was further evaluated with a self-designed bench-scale adsorption column system. The adsorption temperatures investigated in the adsorption column were controlled at 25 and 150 °C. The superficial velocity and residence time of the flow were 0.01 m/sec and 4 sec, respectively. The adsorption column tests were run under nitrogen gas flow. Experimental results showed that WPAC with higher Brunauer–Emmett–Teller (BET) surface area could adsorb more HgCl₂ at room temperature. The equilibrium adsorptive capacity of HgCl₂ for WPAC measured in this study was 1.49 × 10^?1 mg HgCl₂/g PAC at 25 °C with an initial HgCl₂ concentration of 25 μg/m³. With the increase of adsorption temperature ≤150 °C, the equilibrium adsorptive capacity of HgCl₂ for WPAC was decreased to 1.×34 10^?1 mg HgCl₂/g PA≤C. Furthermore,WPAC with higher sulfur contents could adsorb even more HgCl₂ because of the reactions between sulfur and Hg²⁺ at 150 °C. It was demonstrated that the mechanisms for adsorbing HgCl₂ onto WPAC were physical adsorption and chemisorption at 25 and 150 °C, respectively. Experimental results also indicated that the apparent overall driving force model appeared to have the good correlation with correlation coefficients (r) >0.998 for HgCl₂ adsorption at 25 and 150 °C. Moreover, the equilibrium adsorptive capacity of HgCl₂ for virgin WPAC was similar to that for CPAC at 25 °C, whereas it was slightly higher for sulfurized WPAC than for CPAC at 150 °C.     

Application and Evaluation of Two Air Quality Models for Particulate Matter for a Southeastern U.S. Episode

Abstract

The Models-3 Community Multiscale Air Quality (CMAQ) Modeling System and the Particulate Matter Comprehensive Air Quality Model with extensions (PMCAMx) were applied to simulate the period June 29–July 10, 1999, of the Southern Oxidants Study episode with two nested horizontal grid sizes: a coarse resolution of 32 km and a fine resolution of 8 km. The predicted spatial variations of ozone (O₃), particulate matter with an aerodynamic diameter less than or equal to 2.5 μm (PM_2.5), and particulate matter with an aerodynamic diameter less than or equal to 10 μm (PM₁₀) by both models are similar in rural areas but differ from one another significantly over some urban/suburban areas in the eastern and southern United States, where PMCAMx tends to predict higher values of O₃ and PM than CMAQ. Both models tend to predict O₃ values that are higher than those observed. For observed O₃ values above 60 ppb, O₃ performance meets the U.S. Environmental Protection Agency's criteria for CMAQ with both grids and for PMCAMx with the fine grid only. It becomes unsatisfactory for PMCAMx and marginally satisfactory for CMAQ for observed O₃ values above 40 ppb.

Both models predict similar amounts of sulfate (SO₄ ^2?) and organic matter, and both predict SO₄ ^2? to be the largest contributor to PM_2.5. PMCAMx generally predicts higher amounts of ammonium (NH₄ ⁺), nitrate (NO₃ ^?), and black carbon (BC) than does CMAQ. PM performance for CMAQ is generally consistent with that of other PM models, whereas PMCAMx predicts higher concentrations of NO₃ ^?,NH₄ ⁺, and BC than observed, which degrades its performance. For PM₁₀ and PM_2.5 predictions over the southeastern U.S. domain, the ranges of mean normalized gross errors (MNGEs) and mean normalized bias are 37–43% and –33–4% for CMAQ and 50–59% and 7–30% for PMCAMx. Both models predict the largest MNGEs for NO₃ ^? (98–104% for CMAQ, 138–338% for PMCAMx). The inaccurate NO₃ ^? predictions by both models may be caused by the inaccuracies in the ammonia emission inventory and the uncertainties in the gas/particle partitioning under some conditions. In addition to these uncertainties, the significant PM overpredictions by PMCAMx may be attributed to the lack of wet removal for PM and a likely underprediction in the vertical mixing during the daytime.     

城市居民交通方式选择及其影响因素分析——以南京市为例

随着我国城市化水平的提高,城市交通能源消费占总能源消费的比重逐渐增大,交通方式选择及其影响因素研究引起广泛关注。本研究通过调查南京居民出行交通方式,并通过多项logit模型(multinomial logit model),探究影响居民交通选择的关键因素,为城市交通政策的制定提供科学依据,并根据估算结果分析不同政策下交通方式改变带来的节能减排效应。结果显示:出行特性(如出行距离)、出行者的个人特征(如性别、年龄、职业)与出行者的家庭特征(如是否有私家车,是否有小孩)都对交通方式选择有显著影响。如果通过有效的交通政策引导,使私家车出行转变为轨道交通出行,南京每天大约可减少1573.5吨碳排放。     

Relationships Between Nitrogen Transformation Rates and Gene Abundance in a Riparian Buffer Soil

Denitrification is a critical biogeochemical process that results in the conversion of nitrate to volatile products, and thus is a major route of nitrogen loss from terrestrial environments. Riparian buffers are an important management tool that is widely utilized to protect water from non-point source pollution. However, riparian buffers vary in their nitrate removal effectiveness, and thus there is a need for mechanistic studies to explore nitrate dynamics in buffer soils. The objectives of this study were to examine the influence of specific types of soluble organic matter on nitrate loss and nitrous oxide production rates, and to elucidate the relationships between these rates and the abundances of functional genes in a riparian buffer soil. Continuous-flow soil column experiments were performed to investigate the effect of three types of soluble organic matter (citric acid, alginic acid, and Suwannee River dissolved organic carbon) on rates of nitrate loss and nitrous oxide production. We found that nitrate loss rates increased as citric acid concentrations increased; however, rates of nitrate loss were weakly affected or not affected by the addition of the other types of organic matter. In all experiments, rates of nitrous oxide production mirrored nitrate loss rates. In addition, quantitative polymerase chain reaction (qPCR) was utilized to quantify the number of genes known to encode enzymes that catalyze nitrite reduction (i.e., nirS and nirK) in soil that was collected at the conclusion of column experiments. Nitrate loss and nitrous oxide production rates trended with copy numbers of both nir and 16s rDNA genes. The results suggest that low-molecular mass organic species are more effective at promoting nitrogen transformations than large biopolymers or humic substances, and also help to link genetic potential to chemical reactivity.     

对普光气田油菜的二氧化硫熏气实验

为探讨普光气田废气对周围农作物的影响和生物监测方法,选择气田周边油菜作为受试样本,对其进行二氧化硫现场熏气实验。结果表明,油菜在受到1.43 mg/m3浓度、3小时二氧化硫熏气后,植株耐受,不产生明显受害症状;叶片含硫量、MDA含量、可溶性蛋白含量等指标的测定结果与二氧化硫熏气浓度、熏气时间存在显著的相关关系。     

基于宜居视角的居住城市化水平测度——以大连市为例

从宜居的视角出发,结合大连市发展现状建立居住城市化水平测度指标体系,利用模糊层次分析法（AHP）确定指标权重,计算居住城市化水平测度综合指数。通过整理样本社区测度综合指数的数据,建立指标数据库,利用地理信息系统软件MapInfo 10进行格网赋值,构建基于空间插值法的居住城市化水平测度模型,绘制大连居住城市化水平测度专题图,直观展现大连市居住城市化水平发展的时空变化特征。结果表明,1995—2010年大连市居住城市化发展呈现出由整体发展水平低、内部差异小到发展速度提高、地域发展不均衡,再到发展速度减慢,日趋平衡,最后实现发展速度再次提高、均衡发展、差异减小的阶段特征。     

开发区土地集约利用评价——以辽宁炮台经济开发区为例

综合调查分析大连市炮台开发区土地集约利用现状,建立土地集约利用评价指标体系,利用特尔斐法确定指标权重,进而计算土地集约利用度,并分别从扩展潜力、结构潜力、强度潜力、管理潜力四个方面计算土地集约利用强度。综合分析土地集约利用度与土地集约利用潜力强度计算结果表明,炮台开发区土地集约度分值达到86．16％,土地集约利用水平较高,土地利用强度潜力较小。未来土地利用潜力主要为扩展潜力,不存在管理潜力,从而对炮台开发区未来发展土地集约利用提出相应建议与措施。     

企业环境管理会计核算框架与方法研究

企业环境管理会计从环境的角度,将企业的环境影响纳入到环境会计的核算范围之内,构建一些实物型或价值型的环境业绩指标,表达企业对环境造成的影响或损害。本文立足于国际环境会计应用案例,结合财务会计特征和我国目前的环境数据基础,研究提出了中国企业环境管理会计的基本内涵和方法框架,并就如何加强企业环境管理会计的应用进行了讨论。     

羧酸盐型双子表面活性剂的合成及性能研究

以月桂酰氯、乙二胺与丁二酸酐为原料合成了一种羧酸盐型双子(gemini)表面活性剂。采用IR、1 HNMR对中间产物和目标产物进行结构表征,并考察了合成所得羧酸盐型gemini表面活性剂的表面活性。结果表明:合成产物即为目标产物。合成产物的临界胶束浓度为0.027mmol/L,比普通单链表面活性剂低2～3个数量级,表面张力最低可降至29.5mN/m。     

微型测定法测定白醋中的总酸度

利用微型滴定法测定白醋中的总酸度,并对常量实验和微型实验的测定结果进行了比较分析。结果两种方法无显著性差异,F检验、t检验均在允许范围内,微型实验的准确度和精密度均达到常量实验的测定水平,完全满足化学分析要求,并且有效地节省了实验试剂,大大降低了实验成本。