陶瓷微滤膜过滤黑液的清洗与再生

对无机陶瓷微滤膜过滤草桨黑液的膜清洗及再生的方法进行了研究。考察了物理和化学方法的再生效果、单种清洗剂的清洗效果、复合方法的清洗效果和效果的可重复性。结果表明物理冲洗、高温灼烧、单一的化学清洗剂清洗均可以提高陶瓷膜的再生通量；但是复合方法对陶瓷微滤膜的再生效果较好，其中按氢氧化钠溶液清洗、硝酸溶液清洗、次氯酸钠溶液清洗的实验步骤，膜的再生渗透通量高．且重复性强，可望在工业生产的在线清洗中应用。     

缺氧生物筛选--好氧处理技术及其在造纸废水处理工程上的应用

阐述了缺氧生物筛选——好氧生物处理技术的基本原理、特点和设计要求。该技术用在造纸废水处理工程上作为主要的生化处理单元，可抑制丝状菌繁殖，避免污泥膨胀，而且还具有耐冲击负荷、污泥沉降性能好等特点，实际工程取得了理想的效果。     

大气微小颗粒物中汞的污染特性初步研究

采用分级采样器采集大气中微小颗粒物中的汞,用冷原子吸收测汞仪分析。结果表明,颗粒态汞浓度随粒径分布呈双峰型,2个峰值分别出现在粒径1.0μm和4.0μm左右,与水溶性离子,碳含量的粒径分布基本一致。PM_(1.6)、PM_(8)和TSP中颗粒态汞的浓度分别为0.150、0.273、0.429ng/m~3,汞的质量分数分别为3.75.1.09、1.07μg/g,高于背景参考值;结果还表明,颗粒态汞主要集中在细颗粒中。通过正态概率分布测算,PM_(1.6)、PM_(6)中汞主要来自于1个主体源;PM_(1.6)中汞的浓度与硫酸根离子呈显著性相关,而与硝酸根离子、氯离子则不显著相关:说明颗粒物中汞的主要来源可能与燃煤有关。     

Genetic amniocentesis in biamniotic twin pregnancies by a single transabdominal insertion of the needle

We present a technique to aspirate amniotic fluid from both sacs in biamniotic twin pregnancies using a single abdominal insertion with a spinal needle. It was successful in 48 out of 55 cases of biamniotic twin pregnancies referred to our perinatal unit between 1985 and 1994. The single insertion technique was used when the inter-amniotic membrane was clearly evident and two separate free amniotic fluid pools could be reached by the operator with a single puncture. An adequate amount of amniotic fluid was sampled from both sacs to make a cytogenetic diagnosis in all cases. There were four fetuses with trisomy 21 in three twin pregnancies. In two cases, only one twin was affected whilst the co-twin was normal, so that a selective feticide was performed. No miscarriages due to genetic amniocentesis were reported. After 1990, all genetic amniocenteses in biamniotic twin pregnancies (except for one case due to late booking) were performed between 14 and 15 weeks of gestation and with all cases except one, it was possible to sample both twins by a single puncture. We suggest that early amniocentesis (14–15 weeks) by a single abdominal puncture could be a reliable and safe alternative to first-trimester chorionic villus sampling in twin pregnancies.     

Fluid Mechanics of Biological Surfaces and their Technological Application

 A survey is given on fluid-dynamic effects caused by the structure and properties of biological surfaces. It is demonstrated that the results of investigations aiming at technological applications can also provide insights into biophysical phenomena. Techniques are described both for reducing wall shear stresses and for controlling boundary-layer separation. (a) Wall shear stress reduction was investigated experimentally for various riblet surfaces including a shark skin replica. The latter consists of 800 plastic model scales with compliant anchoring. Hairy surfaces are also considered, and surfaces in which the no-slip condition is modified. Self-cleaning surfaces such as that of lotus leaves represent an interesting option to avoid fluid-dynamic deterioration by the agglomeration of dirt. An example of technological implementation is discussed for riblets in long-range commercial aircraft. (b) Separation control is also an important issue in biology. After a few brief comments on vortex generators, the mechanism of separation control by bird feathers is described in detail. Self-activated movable flaps (=artificial bird feathers) represent a high-lift system enhancing the maximum lift of airfoils by about 20%. This is achieved without perceivable deleterious effects under cruise conditions. Finally, flight experiments on an aircraft with laminar wing and movable flaps are presented.     

Analysis of the hydrocyclone stock cleaning process for wasted fibre in a paper mill

The main objective of this project was to evaluate the possibility of reducing the quantity of fibre wasted at one of many hydrocyclone (centrifugal) cleaning processes in a paper mill. It was found that the application of elutriation water to both the tertiary and quaternary cleaners was essential to minimise the fibre discharged to the sewer, and the pressure of this elutriation water had a dramatic effect of reducing the fibre wastage. Accordingly, it has been shown that 150–160 kPa as the optimum pressure range to apply elutriation water to minimise the product grade fibre wasted whilst sending undesired shive fibre to the sewer. Also, monitoring of the press uhle box wastewater revealed that the paper mill has the potential to make substantial cost savings by reducing the waste stream. Further investigation is necessary to determine the types of fibre that are being wasted, and the viability of a screen to recycle the wasted fibre to the process. However, these fibres may be unsuitable to reuse in the process and alternative uses must be found.     

Genetic amniocentesis following multifetal pregnancy reduction to twins: Assessing the risk

Fifty-three patients who elected to reduce their pregnancies to a twin gestation in our centre are known to have subsequently undergone genetic amniocentesis. Five of these patients lost their entire pregnancy following the genetic amniocentesis procedure. This is equivalent to a 9·4 per cent pregnancy loss rate for reduced twin gestations in comparison with an expected loss rate of 2 per cent for non-reduced twin gestations.     

红外法测定石油类项目中标准曲线的简化绘制

目前GB/T164 88-1996以红外分光光度法这测定石油类的有一种方法。该法用四氯代碳作莘取剂 ,四氯化碳用量大。四氯化碳是一种有毒、挥发性较强的有机溶剂。在监测该项目时 ,绘制标准曲线所用的标准储备液的配制相当复杂且形成的系统误差比较大 ,为减少误差并准确地绘制标准曲线 ,本文采取了简化配制步骤的方法来绘制曲线 ,并达到了与JDS -10 0型红外分光测油仪使用说明书中提供的方法一致的效果。